MOTORader 1R User Manual

User Manual

Thankyou for choosing the MotoRader 1R Intercom System

From now on, you can talk with your motorcyclist friends by way of this
new two way wireless Bluetooth communication system, or you can chat
with your pillion.
Maybe receive a cellphone call without pressing a button, You can enjoy
your favorite stereo music from your A2DP enabled cell phone or MP3
player or perhaps listen to the audio navigation message from your
bluetooth enabled GPS.
With this New Super-Range Bluetooth, you can do all these things even
if you are riding or snow skiing !!!
All this hands free functionality is contained within one self contained
module that attaches to the side of your helmet .

Main Features:

Maximum talking range 500 meters between two riders, real two-way wireless

communication by bluetooth system

Up to 120Km/h working speed

Up to 7 hours talking time

Safe auto-receiving cell phone calls

Advanced A2DP & EDR bluetooth profile

Stereo music/audio function(transmits from A2DP enabled cellphone/MP3/GPS)

Line in audio jack ,wired connect with any audio device which with 3.5 mm plug

Wind noise DSP cancellation

Water-resistance, all weather

Friendly for gloves

-------------------------------------------- 1 -----------------------------------------

Read the manual carefully before operating the system , and operate the headset strictly

according to the manual, otherwise performance might not be optimum

Contents

1.Contents ………………………………………….page 2

2.Introdution ……………………………………….page 2-3

3.Components of retail box ………………………..page 4-6

4.Operation: ………………………………………..page 6-14

Introdution:

-------------------------------------------- 2 -----------------------------------------

We will describe this communications kit as B(Bluetooth headset) I (intercom) M (music)

This BIM can either be used for rider or for pillion.

This BIM can connect with four bluetooth devices: a bluetooth enabled cellphone, two BIM(two

riders or one rider and one pillion), an audio source which with a built in or a external audio

bluetooth transmitter.

This BIM is a multifunctional device for motorcyclists and skiers, it can be used:

1) As a handfree bluetooth headset for cellphone calls,

while out riding or snow skiing , the auto answer feature of the internal Bluetooth profile

enables safe automatic Handsfree answering of the phone call automatically. It also offers a

call rejecting function.

—receive the cellphone calls even you do not need to press any button, you

just need to rider your bike as normal, the process of receiving call will be automatic,

after ring on of the call about 5 seconds, it will receive the call automatically. It also can offer

rejecting call function.

2) As a two way wireless full duplex interphone between two riders or between

rider & pillion,

the Maximum communication range over a high clear line of sight path can reach

500m

(this maximum range is not guaranteed).

Typical effective range in city is approximately 300m/950ft. Please note that actual range will

depend on weather conditions, terrain, presence of obstacles i.e. a large vehicle , buildings

non line of sight etc.

Unlike a one-way walkie talkie, which is only half duplex i.e. it can not speak and listen

simultaneously, the BIM offers real-time talking like a normal telephone.

It can connect with two other riders or connect with anther rider and his/her pillion.

The rider can chose which person to talk with

The working speed can be up to 120Km/h !

3) As a wireless bluetooth stereo music receiver and speaker, this BIM has EDR and

A2DP profile , with EDR and A2DP profile it can offer another important function--- listening to

stereo music from A2DP enabled cellphone,MP3 or navigation audio information from GPS(this

MP3 or GPS should has a built in audio bluetooth transmitter)

4) If your MP3,GPS did not have a built in audio bluetooth transmitter , you only need to have a

external audio bluetooth transmitter(sometimes called an AV Dongle, you can find it easily in

the market )to pair with them, then you also can enjoy this added functionality.

5) As the speakers of your MP3/GPS

If your MP3 or GPS is not Bluetooth transmitting enabled and you have not a Bluetooth AV

dongle, the BIM also offers another method of listening to the stereo music/audio info--- the

simple wired method. Plug the audio source directly into the BIM headset via the 3.5 mm stereo

connection

-------------------------------------------- 3 -----------------------------------------

1. Components of retail box

Component

Parts Number

BIM headset main part

BIM -001

Clip for mounting the main unit

BIM -002

Speakers & microphone & audio plug

BIM -003

AC &USB Charger (AC110V-220V / DC

OUTPUT 5V)

BIM -004

2.5mm to 3.5mm audio adapter cable

BIM -005

User manual

BIM -006

Main BIM communications unit

-------------------------------------------- 4 -----------------------------------------

Clip&hanging-hole for mounting the main BIM unit

Clip/Inserted plate/Spacer

Clip with sticker for option

Speakers/Boom Microphone/audio plug

-------------------------------------------- 5 -----------------------------------------

The AC & USB Charger