Motomaster 11-1913-6 User Manual

011-1913-6

ACCESSORIES

Recommended accessories for use with your tool are available from your local dealer. If you need assistance regarding accessories, please contact manufacturer at 1-877-571-2391.

WARNING

ACCESSORIES

SPECIFICATIONS

Boost Ampere 12 V DC, 700 A instantaneous,

Peak Amperage 1400 A

Battery Type Maintenance-free, sealed lead acid,

Area Light 1 long-life white LED

SPECIFICATIONS

USB Port 3.1 A max., 5 V DC

Compressor Maximum Pressure

12 V DC Adaptor 12 V DC

The use of any accessory not recommended for use with

this appliance could be hazardous.

On: 5 seconds, 350 A O: 1 minute

12 V DC, 21 aH

120 PSI

J7C09ME_11-1913_EN_082418.indd 32-1 8/24/2018 11:15:43 AM

Owner’s Manual

MODEL 1119136

Booster Pack

with Air Compressor

J7C09ME_11-1913_EN_082418.indd 2-3 8/24/2018 11:15:43 AM

TABLE OF CONTENTS

INTRODUCTION

INTRODUCTION ............................................................................................ 3

SAFETY INFORMATION ............................................................................... 4

General Safety Warnings and Instructions ..................................... 4

FIRST AID .......................................................................................................... 9

PREPARING FOR USE .................................................................................... 10

Controls & Features ................................................................................. 12

Charging with an AC Source ................................................................ 14

Charging with a DC Source ................................................................... 14

COMMON ACTIONS AND UNIT RESPONSES ....................................... 15

TABLE OF CONTENTS

JUMP-STARTING YOUR VEHICLE ............................................................... 17

Negative Grounded Battery .................................................................. 17

Positive Grounded Battery .................................................................... 19

CHARGING A USB DEVICE ........................................................................... 22

EMERGENCY AREA LIGHT ........................................................................... 24

USING THE COMPRESSOR ........................................................................... 25

TROUBLESHOOTING ..................................................................................... 29

MAINTENANCE AND CARE ........................................................................ 30

The Booster Pack with Air Compressor is a compact, durable, portable jump-start system for vehicles that have a standard 12 V battery system. This self-contained, rechargeable system will start most vehicles without the need for a host vehicle or a 12 V DC power supply. The built-in 12 V DC compressor is the ultimate compressor for all vehicle tires, trailer tires and recreational inatables.

The purpose of this Owner’s Manual is to provide explanations and procedures on operating, maintaining and troubleshooting the product to enable you to fully utilize the functions and features it provides, safely and eectively.

Important

• This unit is delivered in a partially charged state – you must fully

charge it upon purchase and before using it for the rst time. Initial AC charge should be for 40 hours.

• This unit was designed for HOUSEHOLD USE ONLY.

This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B)/NMB-3(B).

INTRODUCTION

LIMITED WARRANTY ..................................................................................... 31

ACCESSORIES .................................................................................................. 32

SPECIFICATIONS ............................................................................................. 32

SAVE THESE INSTRUCTIONS.

This manual contains important safety and operating instructions. Read all instructions and follow them with use of this product.

Questions? Call Customer Service at 1-877-571-2391 for model Model 11-1913-6.

J7C09ME_11-1913_EN_082418.indd 2-3 8/24/2018 11:15:43 AM

SAFETY INFORMATION

The following conventions are used in this guide:

WARNING

Warnings identify conditions that could result in damage to the product or to other equipment.

CAUTION

Cautions identify conditions or practices that could result in damage to the product or to other equipment.

Important

These notes describe an important action item or an item that you must pay attention to.

NOTE

These notes describe additional information which may add to your understanding of how to use the product.

GENERAL SAFETY WARNINGS AND INSTRUCTIONS

WARNING

General instructions pertaining to a risk of re, electric shock,

burst hazard, or injury to persons or property

• Avoid dangerous environments. Do not use appliances in damp or wet

locations. Do not use appliances in the rain.

• Keep children away. All visitors should be kept at a distance from

work area.

• Dress properly. Do not wear loose clothing or jewellery. They can be

caught in moving parts. Rubber gloves and substantial, non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair.

• Use safety glasses and other safety equipment. Use safety goggles

or safety glasses with side shields, complying with applicable safety standards. Safety glasses or the like are available at extra cost from your local dealer.

• Store idle appliance indoors. When not in use, appliances should be

stored indoors in a dry, high, or locked-up place – out of reach of children.

SAFETY INFORMATION (cont’d)

• Do not abuse cord. Never carry appliance by cord or yank it to

disconnect from receptacle. Keep cord from heat, oil, and sharp edges.

• Disconnect appliances. Disconnect the appliance from the power supply

when not in use, before servicing, and when changing accessories.

• Ground Fault Circuit Interrupter (GFCI) protection should be provided

on the circuits or outlets to be used. Receptacles with built in GFCI protection are available and may be used for this measure of safety.

• Use of accessories and attachments. The use of any accessory or

attachment not recommended for use with this appliance could be hazardous. Refer to the accessory section of this manual for further details.

• Stay alert. Watch what you are doing. Use common sense. Do not operate

appliance when you are tired.

• Check for damaged parts. A part that is damaged should be properly

repaired or replaced by an authorized service centre before further use unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced by authorized service centre. Do not use tool if switch does not turn it on and o.

• Do not operate this appliance near ammable liquids or in gaseous or

explosive atmospheres. Motors in these tools often spark and the sparks might ignite fumes.

• Do not expose to extreme heat or ames.

• Never immerse the unit in water or any other liquid, or use when wet.

• NEVER ATTEMPT TO USE THE AC AND DC CHARGING METHODS AT

THE SAME TIME.

• NEVER connect this unit to a positive grounded vehicle using the 12 V DC

Charging Adaptor.

• The 12 V DC Charging Adaptor must only be connected to batteries with

a nominal output voltage of 12 volts. The unit will not operate from a 6 V battery and will sustain permanent damage if connected to a 24 V battery.

Specic Safety Instructions for Jump Starters

WARNING

Specic instructions pertaining to a risk of burst hazard or

explosive gases

• DO NOT use the unit for charging dry-cell batteries that are commonly

used with home appliances. These batteries may burst and cause injury to persons and damage property. Use the unit for charging/boosting a lead-acid battery only. It is not intended to supply power to a low-voltage electrical system other than in a starter-motor application.

SAFETY INFORMATION

J7C09ME_11-1913_EN_082418.indd 4-5 8/24/2018 11:15:43 AM

SAFETY INFORMATION

SAFETY INFORMATION (cont’d) SAFETY INFORMATION (cont’d)

• Use of an attachment not supplied, recommended or sold by

manufacturer specically for use with this unit may result in a risk of electrical shock and injury to persons.

• Working in the vicinity of a lead acid battery is dangerous. Batteries

generate explosive gases during normal battery operation. For this reason, it is of the utmost importance that each time before using the jump-starter you read this manual and follow instructions exactly.

• To reduce the risk of battery explosion, follow these instructions and

those published by the battery manufacturer and manufacturer of any equipment you intend to use in the vicinity of the battery. Review cautionary markings on these products and on the engine.

• This equipment employs parts (switches, relays, etc.) that produce arcs or

sparks. Therefore, if used in a garage or enclosed area, the unit MUST be placed not less than 18 inches (45.5 cm) above the oor.

• This unit is not for use by children and should only be operated

by adults.

• When using this unit close to the vehicle’s battery and engine, stand the

unit on a at, stable surface, and be sure to keep all clamps, cords, clothing and body parts away from moving vehicle parts.

• Never allow red and black clamps to touch each other or another common

metal conductor — this could cause damage to the unit and/or create a sparking/explosion hazard.

• For negative-grounded systems, connect the positive (red) clamp to the

positive ungrounded battery post and the negative (black) clamp to the vehicle chassis or engine block away from the battery. Do not connect the clamp to the carburetor, fuel lines or sheet-metal body parts. Connect to a heavy gauge metal part of the frame or engine block.

• For positive-grounded systems, connect the negative (black) clamp to

the negative ungrounded battery post and the positive (red) clamp to the vehicle chassis or engine block away from the battery. Do not connect the clamp to the carburetor, fuel lines or sheet-metal body parts. Connect to a heavy gauge metal part of the frame or engine block.

• If the clamps are connected incorrectly with regard to polarity, the backlit

LCD screen will display the Battery Status Icon, Battery Voltage Indicator,

CAUTION

To reduce the risk of injury or property damage

• NEVER ATTEMPT TO JUMP-START OR CHARGE A FROZEN BATTERY.

• Vehicles that have on-board computerized systems may be damaged if

vehicle battery is jump-started. Before jump-starting, read the vehicle’s owner’s manual to conrm that external-starting assistance is suitable.

• Never smoke or allow a spark or ame in vicinity of vehicle battery, engine

or power station.

• Stay clear of fan blades, belts, pulleys, and other parts that can cause injury

to persons.

• Remove personal metal items such as rings, bracelets, necklaces and

watches when working with a lead acid battery. A lead acid battery can produce a short circuit current high enough to weld a ring, or similar metal object, to skin, causing a severe burn.

• Do not wear vinyl clothing when jump-starting a vehicle. Friction can

cause dangerous static-electrical sparks.

• Be extra careful to avoid dropping a metal tool onto the battery. It might

spark or short-circuit the battery or another electrical part and could cause an explosion.

• Jump-start procedures should only be performed in a safe, dry, well-

ventilated area.

• Always store battery clamps when not in use. Never touch battery clamps

together. This can cause dangerous sparks, power arcing and/or explosion.

and the Clamp Icons. The Alarm Icon, the “+” and ”–” signs and the Reverse Polarity Icons will ash and the unit will sound a continuous alarm until the clamps are disconnected. Disconnect the clamps and reconnect to battery with correct polarity.

• Always disconnect the negative (black) jumper cable rst, followed by the

positive (red) jumper cable, except for positive grounded systems.

• Do not expose battery to re or intense heat since it may explode. Before

disposing of the battery, protect exposed terminals with heavy-duty electrical tape to prevent shorting (shorting can result in injury or re).

• Place this unit as far away from the battery as cables permit.

• Never allow battery acid to come in contact with this unit.

• Do not operate this unit in a closed area or restrict ventilation in any way.

• This system is designed to be used only on vehicles with a 12 V DC battery

system. Do not connect to a 6 V or 24 V battery system.

• This system is not designed to be used as a replacement for a vehicular

battery. Do not attempt to operate a vehicle that does not have a battery installed.

• Excessive engine cranking can damage a vehicle’s starter motor. If

the engine fails to start after the recommended number of attempts, discontinue jump-start procedures and look for other problems that may need to be corrected.

• Do not use this jump starter on a watercraft. It is not qualied for marine

applications.

• Although this unit contains a non-spillable battery, it is recommended that

unit be kept upright during storage, use and recharging. To avoid possible

SAFETY INFORMATION

J7C09ME_11-1913_EN_082418.indd 6-7 8/24/2018 11:15:43 AM

SAFETY INFORMATION (cont’d) FIRST AID

8 9

damage that may shorten the unit’s working life, protect it from direct sunlight, direct heat and/or moisture.

• All ON/OFF switches should be in the OFF position when the unit is

charging or not in use. Make sure all switches are in the OFF position before connecting to a power source or load.

CAUTION

To reduce the risk of injury

When working with lead acid batteries, always make sure immediate assistance is available in case of accident or emergency.

FIRST AID

Specic Safety Instructions for the USB Ports

CAUTION

To reduce the risk of property damage

• Do not insert foreign objects into the unit’s USB outlets.

• Do not attach USB hubs or more than one personal electronic device to

SAFETY INFORMATION

each USB Port.

• Do not use this unit to operate appliances that require more than 3.1A (5V)

to operate from each of the USB Ports.

• Some household USB-powered electronics will not operate with this unit.

Specic Safety Instructions for Compressors

WARNING

Specic instructions regarding the risk of bursting

• Bursting articles can cause serious injury.

• Carefully follow instructions on articles to be inated.

• Never exceed the recommended pressure listed in instructions on articles

to be inated. If no pressure is given, contact article manufacturer before inating.

• Monitor the pressure at all times on the LCD screen.

Always have protective eyewear when using this product: contact with battery acid may cause blindness and/or severe burns. Be aware of rst aid procedures in case of accidental contact with battery acid.

Have plenty of fresh water and soap nearby in case battery acid contacts skin.

• Skin: If battery acid comes in contact with skin, rinse immediately with

water, then wash thoroughly with soap and water. If redness, pain, or irritation occurs, seek immediate medical attention.

• Eyes: If battery acid comes in contact with eyes, ush eyes immediately, for

a minimum of 15 minutes and seek immediate medical attention.

• LCD liquid crystal display: If liquid crystal comes in contact with your

skin: Wash area o completely with plenty of water. Remove contaminated clothing. If liquid crystal gets into your eye: Flush the aected eye with clean water and then seek medical attention. If liquid crystal is swallowed: Flush your mouth thoroughly with water. Drink large quantities of water and induce vomiting. Then seek medical attention.

CAUTION

To reduce the risk of injury or property damage

• Never leave the compressor unattended while in use.

• Do not operate compressor continuously for longer than approximately

10 minutes, depending on ambient temperatures, as it may overheat. This could damage the compressor. Follow the instructions in the “Portable Compressor” section.

J7C09ME_11-1913_EN_082418.indd 8-9 8/24/2018 11:15:43 AM

+ 11 hidden pages