Motion Sound SRV-112 User Manual

1

Made In the USA

SRV-112

Rotary Guitar Speaker Cabinet

Motion Sound

4426 So 450 West Ste G

Salt lake City, UT 84123

801 265-0917

www.motion-sound.com

1

2

SRV-112

The SRV-112 is a rotary speaker cabinet designed to be driven

by any amplifier that can safely drive an 8-ohm load

. It is

shipped with an Eminence™ Sreamin’ Eagle speaker.

Maximum power input is 50 watts RMS.

Caution if you are not sure of your amplifiers load

capability, contact it’s manufacturer before

connecting to the SRV-112

-Introduction-

Motion Sound has been successfully manufacturing several types of rotary speakers since 1995.
The SRV-112 is the second generation of guitar rotary speakers. We have incorporated many
suggestions from musicians into the SRV-112 and added our many years of experience into its
features and performance. The SRV-112 defines the guitar rotary speaker standard.

-Warning-

-The SRV-112 can produce high sound pressure levels, hearing protection is advised!-

-The SRV-112 must be earthed and connected to correct power for safe operation-

-Specifications-

• Input connector ¼” speaker input jack on rear panel. (Ground isolated)

• Input impedance

• Power level

• Speaker

• Fuse

Power Voltage Frequency Watts Fuse (slo-blow)
USA 117 VAC 60 Hz 50 1 Amp
Europe 220-240 VAC 50 Hz 50 .5 Amp
Australia 220-240 VAC 50 Hz 50 .5 Amp
Japan 100 Vac 60 Hz 50 1 Amp

• Finish Two part polymaric™ on MDF (Proprietary Polymer)

• Dimensions 24.5” H 20” W 17” D 64 Lbs.

One Eminence™ 8 ohm screamin’ Eagle.

Located in AC inlet module.

8 ohms (with supplied speakers).

Up to 50 watts RMS (with supplied speakers).

2