Motic China Group MOTICAMX3PLUS User Manual

X3

Quick Start Guide

Thank you for purchasing this Moticam. This camera is a delicate instrument and should be handled with care. When not in use,

please store the camera in a safe place with the dust cap attached. Do not let the camera get in contact with water or expose it to

extreme temperatures (below 0 or above 50 degrees Celsius). In order to receive the highest level of service, please retain your receipt

as proof of purchase and register your camera online at www

Should you have any questions please do not hesitate to contact our customer service.

.motic.com today.

2

Using the camera on an eyepiece

1. Install the Motic Images Plus application program from the CD included.

2. Remove the Dust Cap (B) from the camera (A) and attach the focusable lens (C).

3. Choose the right size eyepiece adapter (D) and attach this to the focusable lens.

4. Attach this assembly to your microscope’s eyepiece by tightening the centering screws on the

eyepiece adapter.

5.

Connect to the Moticam X3

WiFi signal. Please see the instructions on page 6.

3