Motic China Group MOTICAMX3 User Manual

Digital Camera

Quick Start Guide

Thank you for purchasing this Moticam. This camera is a delicate instrument and should be handled with care. When not in use,

please store the camera in a safe place with the dust cap attached. Do not let the camera get in contact with water or expose it to

extreme temperatures (below 0 or above 50 degrees Celsius). In order to receive the highest level of service, please retain your receipt

as proof of purchase and register your camera online at www.motic.com today.

Should you have any questions please do not hesitate to contact our customer service.

This device conforms to US FCC and european EMC regulations: operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

2

Using the camera on an eyepiece

1. Install the Motic Images Plus application program from the CD included.

2. Remove the Dust Cap (B) from the camera (A) and attach the focusable lens (C).

3. Choose the right size eyepiece adapter (D) and attach this to the focusable lens.

4. Attach this assembly to your microscope’s eyepiece by tightening the centering screws on the

eyepiece adapter.

5. Open the back cover, install the battery in the camera. Connect the USB power supply to the

camera. When the light on the camera side is red, it means the battery is charging. When the

light turns to yellow, it means the battery is fully charged. The light on the back cover will flash

and become stable when the camera is in operation.

3

6. Connect to the Moticam X

WiFi signal. Please see the instructions on page 6.

3