Motic China Group MOTICAMS2 Users manual

Moticam S2

Assembly

Thank you for purchasing our Moticam S2 solution.
This quick step guide will show you how to place the Moticam S2 onto
a C-mount microscope.

Moticam S2

C-Mount adapter

Note:

Please note that the Moticam S2 is a C-mount camera, therefore you
must have a trinocular microscope with a relevant C-Mount adapter
between 0.5X and 0.65X magnification.

Protective
dust cover

Step 1: Unscrew the protective dust cover from the

bottom of the Moticam S2 to expose the imaging
sensor to light.

Trinocular Microscope

Step 2: Mount the Moticam S2 onto your microscope’s C-mount, and if your microscope is equipped with a beam

splitter, pull the beam splitter to ensure light can reach to the trinocular port.

Power
button

Step 3: Plug in the Moticam S2 power supply and

press the power button to start.

Step 5: Select the MotiConnect T software from the

tablet home screen, and the software is ready to
take your first images.

Step 4: Press and hold the power button for 2-3

seconds to boot up the Moticam S2.

Step 6: Using the MotiConnect T is easy, an onscreen

guide can be activated by pressing the question
mark at any stage. This will allow you to tap an icon
and examine its function.

SAP:1300901109941Updated: 16.09.2014