mothercare 2 in 1 booster seat User Manual

2 in 1 booster seat

user guide

IMPORTANT. KEEP FOR FUTURE REFERENCE

introduction

This two height booster seat is designed to be fitted to a suitable
chair*, to raise the height of your child when sat at a table.

WARNING: It is recommended that the booster seat be used in the
upright position only by children capable of sitting upright unassisted
(around six to nine months). The product is suitable for children up to
approximately 4 years.

When removed from the booster, the base can also be used as a step
stool (weight limit 40 kg maximum).

* Refer to page 6 safety notes for information on suitable types of
chairs.

parts checklist

fig 1

upper seat & harness

fig 2

lower seat / step stool

fig 3

securing strap

1

preparation for use

the securing strap

fig 4

1.

Disengage the buckle of the
securing strap by squeezing the
fastner prongs and pulling apart.

fixing the seat to the base

fig 5

Place the upper seat onto the
base as shown, and press down
firmly.

Tip: Assembly will be eased by
firstly aligning the front edge of the
seat and front edge of the base
before fixing the two parts
together.

2