Mosmatic FL-EB 200, FL-EG 200, FL-EG 300, FL-ER 300 Assembly Instructions Manual
TD - 78250 A
© MOSMATIC AG 08.03.2007 Subject to change without notice
Assembly instructions
FL-EB 200
No. 78.250
FL-EG 200
No. 78.260
FL-EG 300
No. 78.262
FL-ER 300
No. 78.272
Economy Surface Cleaner
For your ow n safety
- Read all ins tructions before the initial operation. Check their proper
condition and that they operate safely.
- Always use protection gear when using p roducts connected to high
pressure.
- Before any maintenance or nozzle-change, turn of f the high pressure
water supply, e.g.: turn off and se cure the powe r switch.
- After turning off the sy stem, allow all self prop elled equipment to
come to a complete stop before handling.
- Safety regulations and guidelines (Accident Prevention Rules) from
the manufac turer of your hi gh pressure cleaner are applicable.
- Nozzle installation according to nozzle manufacturer.
- Do not move the unit over objects or uneven surface s.
- Do not lift up the unit while operating.
- Do not run the unit if spray-arm is out of balance or bent, damage to
the swivel will result.
- No modifications to the unit are permit ted.
Basic-Version (FL-EB 200)
1. Install the HP-gun (a) with the preinstalled adapter (b) to
the swivel (c).
Note: Install the HP -gun (a) in a 90° angle to the handle (d)
(see top view).
Standard-Version
1. Install the wand (e) to the quick-connect (f).
Standard-Version short
1. To use the short version with toggle swivel (g) , detach
the HP- gun (a) from the wand (e).
2. Detach the e xtension piece (h) including wand (e) from
the toggle swivel (g).
3. Install the HP-gun (a) dire ctly to the to ggle swivel (g).
4. Use bolt (i) and nut ( j) to install the handle (d ) to the housing (k).
Note: Install the HP -gun (a) in a 90° angle to the handle (d)
(see top view).
Basic-Version
Top view
Standard-Version
Standard-Version short
h
d
e
a
c
f
i
j
k
g
a
a
a
d
b
b
b
( This instruc tion is valid for the base model as well as for
the resulting versions)
TD - 78250 A
© MOSMATIC AG 08.03.2007 Subject to change without notice
Spare parts List
Pos. Part No. Description
1 58.908 Toggle Swivel KDYF
2 36.906 Carbide seal-kit
3 42.904 KGK-Seal-kit
4 78.908 Extension
5 78.907 HP-wand
6 51.103 Adapter G1/4"M - G1/4"NPT-M
7 29.081 HP-gun 4000 psi
8 82.623 Turbo-rotor-arm Dia. 10"
9 901.492 Brush ring for Dia. 12"
10 1503 H P-nozzle 1503
11 80.943 Stainless steel castor
12 89.406 Handle
13 58.000 Swivel DYF
14 82.621 Turbo-rotor-arm Dia. 6"
15 901.490 Brush ring for Dia. 8"
FL-EB 200
No. 78.250
FL-EG 200
No. 78.260
FL-EG 300
No. 78.262
FL-ER 300
No. 78.272
Economy Surface Cleaner
12
8910
11
13
6
7
14 15
12
2
5
6
1
3
2
4
7
Loading...