Mosconi GLADEN D2 100.4 DSP Specification Sheet

D2 100.4 DSP INSIDE

Class D, 4-channel amplifier with on-board DSP + 2 digitally processed line outputs
DSP with SP-DIF digital input, AUX inputs suitable for hands-free set, mobile navigation and external stereo sources

Stereo power RMS @4Ohm W 4 x 105 [@ 14V4] – 4 x 80 [@ 12V6] – 4 x 60 [@ 11V]
Stereo power RMS @2Ohm W 4 x 130 [@ 13V8]
Stereo (CH1-2) + Bridge (CH3-4) @4Ohm W 2 x 90 (ST) + 1 x 280 (BTL) [@ 13V8]
DC-DC converter typology Unregulated – Push Pull
Input sensitivity range V 0.75 ÷ 12 (LL); 1.9 ÷ 31 (HL) rms
Autosense power-on (High Level only) 3 modes: OFF, BTL, SE (as output, REM pin drives up to 100mA)
Hand-free, Navigator, AUX inputs yes (CH3-4)
Auto-Fading between inputs yes
Signal Mix capability yes
USB cable for PC connection yes
Proprietary DSP software yes, for Windows O.S.
SP-DIF digital input (optical) yes, Toslink
Parametric equalizer bands 30 (CH1-2) / 25 (CH3-4) / 9 (CH5-6)
Implemented filters type all standard filters available
HP frequency range for each channel Hz 10 ÷ 20000
LP frequency range for each channel Hz 10 ÷ 20000
HP and LP filter slope for each cell dB/Oct 6-12 [up to 60 (CH1-2-3-4) or 48 (CH5-6), if cascaded]
Band pass allowed yes
Variable “Q” 0.5 ÷ 40
Time delay ms 0 ÷ 15 (0.02 steps)
Phase inversion for each channel 0 / 180°
Gain level for each channel dB -121,5 ÷ 0
Overall efficiency > 75%
Internal fuse A 1 x 40
Dimensions mm 150 x 145 x 40
Weight g 1028
Finishing Silver (brushed)
Optionals:

- Remote control (RCD and RC-Mini)

- Bluetooth streaming module (MOS-BTS) [t.b.a.]

- Bluetooth communication module (MOS-BTM)

D2 100.4 DSP

NOTE: this amplifier is designed to play music on real speakers. It is not rated to drive static signals on pure resistive loads.