38in x 60in Straight Slat Table
FSMVPT2068
Customer Service: (888) 922-2336, 7:00am to 12:00am Everyday CST
Live Chat @ Academy.com: 24/7
Made in China
Please keep this instruction manual for future reference
Assembly Instructions& User’s Manual
Table of Contents
Page 1 of 5
Note: Before beginning assembly of product, make sure
all parts are present. Compare parts with package content
list and hardware contents above. If any part is missing or
damaged do not attempt to assemble the unit. Contact
customer service for replacement parts.
Warnings…………………………………………………………….…..…2
Tools and Parts……………………………………………………….…...2
Assembly Instructions…………………………………………………....3
Care and Maintenance……………………………………………...……4
Warranty Information………………………………………....................5
Warnings
Page 2 of 5
This product requires adult assembly. Keep screws and parts away from children.
Please read this manual before assembly or use.
Do not tighten nuts or screws until assembly is complete.
Before assembly, check the package contents carefully to ensure that all parts are included.
For missing or replacement parts, contact customer service at (888) 922-2336.
SKU#: 102634274 Style#: FSMVPT2068
Parts List
A Table Top 1
B Leg 2
C Connector 4
1 Allen wrench
Tools Required (Included)
Hardware
D M6 x 20mm Bolt 16
E M6 Washer 16
F Bolt Cap 16
Assembly Instructions
Step 1:
Turn the table top (A) upside down on a
soft, non-abrasive surface to avoid
scratching the table top during assembly.
Attach two table legs (B) one at a time at
corner of the table using bolts 8X(D) and
washers 8X(E).
Attach connector 4X(C) using bolts 8X(D)
and washers 8X(E) to connect the table
leg with table rim. Repeat this step at all
four corners.
Tighten all bolts using included Allen
wrench (G). Cover bolts with bolt cap
16X(F).
Step 2:
Turn the table top upwards and your
table is now ready to use.
NOTE: There are four adjustable bolts
under the table legs. Screw bolts in and
out to make the table stand level on the
floor.
Page 3 of 5
Care and Maintenance
Page 4 of 5
The table should be cleaned on a regular basis to promote safe use and prolong product
life.
Wipe the frame with a smooth damp cloth and air dry.
Do not use abrasive cleaners as they may damage or scratch the surface paint.
Do not leave this product in harsh weather conditions for extended periods.
For extended product life, the table should be stored indoors or covered during prolonged
periods of non-use.
Storing in a dry location will help prevent rust.
Warranty Information
Page 5 of 5
The appliance has been manufactured under the highest
standards of quality and workmanship. We warrant to the
original consumer purchaser that all aspects of this product will
be free of defects in material and workmanship for one year
from the date of purchase. A replacement for any defective part
will be supplied free of charge for installation by the consumer.
Defects or damage caused by the use of other then genuine
parts are not covered by this warranty. This warranty shall be
effective from the date of purchase as shown in the purchaser
receipt.
This warranty is valid for the original consumer purchaser only
and excludes industrial, commercial or business use of the
product, product damage due to shipment or failure which
results from alteration, product abuse, or product misuse,
whether performed by a contractor , service company , or
consumer. We will not be responsible for labor charges and/or
damage incurred in installation, repair or replacement nor for
incidental or consequential damage.
Loading...