Morsø S100-12, S101-12, S101-11, S120-21, S120-22 User Manual
...
The Morsø S100 Series
UK Instructions for use 1-22
www.morsoe.com
UK Fitting Instructions 23-49
Contents
1. Introduction.............................................................................................................. 2
2. Insert types......................................................................................................... 3-12
3. Functional elements........................................................................................... 13
4. Operations handle............................................................................................... 13
5. Fuel............................................................................................................................ 14
6. Special instructions.......................................................................................14-15
7. Air supply..................................................................................................................16
8. Using for the rst time.......................................................................................16
9. Lightning the re..................................................................................................17
10. Stoking......................................................................................................................17
11. Adding wood......................................................................................................... 18
12. Stoking in the transition time........................................................................ 18
13. Stoking with an open door............................................................................. 18
14. Cleaning..............................................................................................................18-19
15. What to do in the event of a chimney re.................................................19
16. Heat-resistant stones.........................................................................................19
17. Sliding door.............................................................................................................20
18. What to do if.......................................................................................................... 20
19. Information for dealers..................................................................................... .21
20. Guarantee.............................................................................................................. .22
1. Introduction
•You have chosen a high-quality Morsø insert - thank you for trusting us. Using
and maintaining your replace correctly (by following these instructions) will ensure your replace functions without problem for a long time to come. Please read
these instructions carefully.
2. Insert types
These instructions describe the function of the replace inserts listed below:
/ONE-SIDED
Morsø S100-12
Width (inbuilt) 1196 mm
Height (inbuilt) 1168-1368 mm
Depth (inbuilt) 573 mm
Weight 267 kg
Output 12 kW
Flue pipe Ø180 mm
Fresh air pipe Ø150 mm
Adapter tting Ø180-Ø150 mm
Optional accessories:
Stainless decorative frame
Heat storage side/back + top
2 3
/ONE-SIDED
Morsø S101-11
Width (inbuilt) 795 mm
Height (inbuilt) 1305-1505 mm
Depth (inbuilt) 537 mm
Weight 135 kg
Output 10 kW
Flue pipe Ø180 mm
Fresh air pipe Ø125 mm
Adapter tting Ø180-Ø150 mm
Optional accessories:
Stainless decorative frame
Heat storage side/back + top
Grille + Ash pan
/ONE-SIDED
Morsø S101-12
Width (inbuilt) 805 mm
Height (inbuilt) 1339-1539 mm
Depth (inbuilt) 602 mm
Weight 156 kg
Output 10 kW
Flue pipe Ø180 mm
Fresh air pipe Ø125 mm
Adapter tting Ø180-Ø150 mm
Optional accessories:
Stainless decorative frame
Heat storage side/back + top
Grille + Ash pan
4 5
/TWO-SIDED
Morsø S120-21
Width (inbuilt) 773 mm
Height (inbuilt) 1124-1324 mm
Depth (inbuilt) 511 mm
Weight 130 kg
Output 10 kW
Flue pipe Ø180 mm
Fresh air pipe Ø125 mm
Adapter tting Ø180-Ø150 mm
Optional accessories:
Stainless decorative frame
Heat storage top
Grille + Ash pan
/TWO-SIDED
Morsø S120-22
Bredde (indbyg.) 800 mm
Width (inbuilt) 800 mm
Height (inbuilt) 1125-1325 mm
Depth (inbuilt) 537 mm
Weight 129 kg
Output 10 kW
Flue pipe Ø180 mm
Fresh air pipe Ø125 mm
Adapter tting Ø180-Ø150 mm
Optional accessories:
Stainless decorative frame
Heat storage top
Grille + Ash pan
6 7
/TWO-SIDED
Morsø S122-22
Width (inbuilt) 963 mm
Height (inbuilt) 1358-1558 mm
Depth (inbuilt) 543 mm
Weight 264 kg
Output 10 kW
Flue pipe Ø180 mm
Fresh air pipe Ø150 mm
Adapter tting Ø180-Ø150 mm
Optional accessories:
Stainless decorative frame
Heat storage top
/CORNER
Morsø S140-41
Width (inbuilt) 613 mm
Height (inbuilt) 1290-1490 mm
Depth (inbuilt) 613 mm
Weight 109 kg
Output 7 kW
Flue pipe Ø180 mm
Fresh air pipe Ø125 mm
Adapter tting Ø180-Ø150 mm
Optional accessories:
Stainless decorative frame
Heat storage sides + top
Grille + Ash pan
8 9
/CORNER
Morsø S140-42
Width (inbuilt) 674 mm
Height (inbuilt) 1290-1490 mm
Depth (inbuilt) 674 mm
Weight 157 kg
Output 7 kW
Flue pipe Ø180 mm
Fresh air pipe Ø125 mm
Adapter tting Ø180-Ø150 mm
Optional accessories:
Stainless decorative frame
Heat storage sides + top
/THREE-SIDED
Morsø S160-32
Width (inbuilt) 550 mm
Height (inbuilt) 1395-1525 mm
Depth (inbuilt) 912 mm
Weight 258 kg
Output 12.6 kW
Flue pipe Ø180 mm
Fresh air pipe Ø150 mm
Adapter tting Ø180-Ø150 mm
Optional accessories:
Support stand
Stainless decorative frame
Heat storage top
Grille + Ash pan
10 11
/THREE-SIDED
Morsø S161-32
Width (inbuilt) 550 mm
Height (inbuilt) 1395-1525 mm
Depth (inbuilt) 700 mm
Weight 217 kg
Output 10 kW
Flue pipe Ø180 mm
Fresh air pipe Ø150 mm
Adapter tting Ø180-Ø150 mm
Optional accessories:
Support stand
Stainless decorative frame
Heat storage top
Grille + Ash pan
12 13
3. Functional elements
The S100 series is known for being extremely easy to use.
Grill to convection air top
Door handle
Operating handle for combustion air
Grill to convection air base
4.Symbols for operating handle / operating
•Operating handle for combustion air
+ = maximum air supply for rapid stoking
I = medium heat output.
– = low heat output.
•Closing mechanism for folding door
– push the handle outwards:
The door frame is released and the door can be opened.
– ”let go”:
When the door is open, let go the handle/door (at an angle of > 20°) and the door
will close and ”lock” by itself. The replace inset is now ready for use.
• Closing mechanism for sliding door
– Push up = the door opens
– Push down = the door closes
5. Fuel - Wood
•Permitted fuel
Dry, well-stored untreated wood (preferably hardwood), wood briquettes.
•Clean combustion
The wood must be dry (relative moisture content < 15%) and untreated. In addition,
the correct amount of wood must be burnt to achieve clean combustion with low emissions.
•Damp wood produces a low heat value and the surfaces inside the replace inset will
quickly become sooted over. A light layer of soot after 2-3 times of use is however normal.
•The guarantee is no longer valid if the incorrect fuel is used!
6. Special instructions
• Please note that the surfaces of the replace inset can become very hot during use.
We recommend wearing protective gloves when operating the replace insert. Please
make children aware of the dangers and keep them away from the replace inset when
in use.
• To stop the replace insert from overheating, do not close the air grates when stoking.
• A maximum amount of wood has been calculated for each replace insert. Larger
amounts than those stated can lead to overheating, which can damage the replace insert!
Maximum amount of wood:
Morsø S100-12 3.4 kg/hour
Morsø S101-11 and S101-12 3.2 kg/hour
Morsø S120-21 and S120-22 3.2 kg/hour
Morsø S121-21 1.7 kg/hour
Morsø S122-22 3.2 kg/hour
Morsø S140-41 and S140-42 1.9 kg/hour
Morsø S160-32 and S161-32 3.4 kg/hour
The second stoking should be done approx. 45 min. after the replace insert is rst lled. Adding additional fuel is therefore often not necessary. However, if you want to stoke the re more, extend the time between lling and reduce the amount of wood (0.5 – 1
kg).
14
• The guarantee is no longer valid if the manufacturer’s specications for determining the
convection air and the chimney’s dimension are not followed or if these are later changed.
80cm
•Inserts with sliding doors are supplied with an extra set of counterweights, the door is selfclosing on delivery, but in all other countries can/must be delivered so the door stays open
when filling.
Note that the door must be kept shut when stoking. (Instructions on how to fit extra weights
can be found in the assembly instructions).
• Only spare parts expressly approved by the manufacturer may be used.
• If necessary, please contact your dealer.
• No structural changes must be made to the inserts!
•No inammable objects must be placed
inside 80 cm of the radiation area of the
replace inset, measured from the edge
of the combustion chamber’s opening
15
Loading...