MORryde TV1-084H, TV56-129H Installation Instructions Manual

Hardware for mounting television: Refer to your television’s owners manual or select the appropriate bolt from the hardware provided.

M4

M4 Lock Washer (6)

M4x12mm Bolt (4)

M4x30mm Bolt (4)

M5 Lock Washer (6) M6 Lock Washer (6)

M4/M5 M6

#10 Washer (6)

*Spacers are for televisions with recessed mounting holes.

M4/M5 Spacer (4)
Optional*

M6 Spacer (4)
Optional*

M5 M6

M5x12mm Bolt (4)

M5x30mm Bolt (4)

M6x35mm Bolt (4)

M8

M8 x35mm Bolt (4)

M8 Lock Washer (6)

M6x12mm Bolt (4)

M8x12mm Bolt (4)

Hardware for securing bracket: Select the appropriate length based on the thickness of your mounting surface.

< best for wood applications >< best for metal applications >

1/4” x 1” Self-drilling Screw (8)

MORryde International, Inc. | 1966 Sterling Ave | PO Box 579 | Elkhart, IN 46516

Customer Service: 574.293.1581 | www.MORryde.com

1/4” x 1” Lag Bolt (8) 1/4” x 1-1/2” Lag Bolt (8) 1/4” ID Washer (8)

Installation Instructions for TV1-084H (CONT.)

Prepare television for installation: If your television came with a stand, please remove the stand by referring
to your television’s owner’s manual and ensure the hardware has been removed from the mounting holes.

STEP 1: Remove TV mount plate by loosening
wing nut on the back side and sliding plate to
the left then straight away from mount.

STEP 2: Secure the mount to the mounting
surface: pre-drill holes using a 1/8” drill bit. Use
lag bolts or self tapping screws (depending
on your mounting surface) with 1/4” washers
to secure base of bracket to the mounting
surface.

1/4” x 1-1/2” Lag Bolt (8)

1/4” x 1” Self-drilling Screw (8)

1/4” ID Washer (8)

1/4” x 1” Lag Bolt (8)

STEP 3: Secure the television to mounting
plate. Line up hole pattern on your television
with the matching hole pattern on the universal
mounting plate as close to the center as
possible. Using the appropriate mounting
hardware, washers, and optional spacers,
secure the television to the mounting plate.

MORryde International, Inc. | 1966 Sterling Ave | PO Box 579 | Elkhart, IN 46516

Customer Service: 574.293.1581 | www.MORryde.com

STEP 4: Attach TV with connected plate to the
mount by moving straight into mount and then
sliding TV and plate all the way to the right. Tighten
wing nut to secure.

NOTE: This mount should be in the locked position
during travel.

CAUTION: This step may require two people
to lift the TV onto the bracket and secure.
MORryde is not responsible for property damage
and/or personal injury.