MORryde TV5-005H Installation Instructions Manual

Hardware for mounting television: Refer to your television’s owners manual or select the appropriate bolt from the hardware provided.

M4 M5

M4 Lock Washer (6)

M4x30mm Bolt (4)

Hardware for securing bracket: Select the appropriate length based on the thickness of your mounting surface.

MORryde International ▪ 1966 Sterling Avenue ▪ PO Box 579 ▪ Elkhart ▪ IN 46516

Customer Service: 574-293-1581 ▪ www.morryde.com

M4x12mm Bolt (4)

#10 Flat Washer (4)

< best for wood applications >

M5 Lock Washer (6)

M5x12mm Bolt (4)

M5x30mm Bolt (4)

STEP 1 Secure both docking stations to
the wall/mounting surface: Pre-drill holes

using a 1/8” drill bit. Use at head screws or

lag bolts to secure the docking stations to the
mounting surface.

CAUTION:

Using a screw or bolt length
that is too long for your application may
result in puncturing exterior structure.

STEP 2 Secure the television to the mounting
plate: Line up the hole pattern on your television

with the matching hole pattern on the mounting
plate. Using the appropriate mounting hardware
and washers, secure the television to the
mounting plate.

Lock Washer (4)Bolt (4)

Optional Washer (4)

STEP 3 Slide mounting plate with television into desired docking station: