Morris Tube Bending Capabilities User Manual

CLR

S
T

S

T

O.D.

d = Degrees Bend Angle

CAPABILITIES!

NEW

M

Moorrrriiss CCoouupplliinngg CCoo

m

mppaannyy

Tube Bending Capabilities

Pipe and tube bends of up to 180 degrees are readily
available in aluminum, stainless, carbon steel and

alvanized in the sizes listed below. Other centerline

g
radii are available but not shown. Special shapes,
“U” bends, offsets, and bifurcated bends available
upon request. Morris tube bends are shipped from
our Knoxville, Tennessee plant.

TUBE PIPE

SIZE SIZE INCHES MILLIMETERS RADII (CLR) INCHES (ST)

1" 1.0 25.4 3, 4, 6, 12 4"

1" 1.315 33.4 3, 5 4"

1-1/4" 1.25 31.8 3, 7.25 4"

1-1/4" 1.660 42.2 3.5, 4, 6.25 4"

1-1/2" 1.5 38.1 2.5, 6, 7.5, 9, 12, 15, 18, 24, 30, 36 4"

1-3/4" 1.75 44.5 2.5, 8, 9, 12, 15, 24, 30, 36, 48 4"

1-1/2" 1.9 48.3 5, 6, 7.5, 9, 10, 12, 18, 24, 30, 36, 48 4"

2" 2.0 50.8 2.5, 3, 3.5, 4, 5, 6, 8, 8.5, 9, 10, 12, 15, 18, 24, 30, 36, 48 4"

2-1/8" 2.125 54.0 3, 5, 12, 24, 30, 36 4-1/4"

2-1/4" 2.25 57.2 3, 9, 12, 15, 17, 24, 30, 36 4-1/2"

2" 2.375 60.2 6, 7.5, 10, 12, 15, 17, 24, 30, 36, 48 4"

2-1/2" 2.5 63.5 4, 6, 9, 12, 15, 17, 24, 30, 36, 48 5"

2-3/4" 2.75 69.9 2.75, 4, 17, 30, 36, 48 5-1/2"

2-1/2" 2.875 73.0 12, 12.5, 15, 17, 24, 30, 36, 60 5"

3" 3.0 76.2 4, 4.5, 7.5, 9, 10, 12, 15, 18, 24, 30, 36, 48, 60 6"

3-1/4" 3.25 82.6 17, 30, 36 6-1/2"

3-1/2" 3" 3.5 88.9 3.5, 4.5, 6, 8.75, 12, 15, 16, 18, 24, 30, 36, 48 7" (6" - pipe)

3-3/4" 3.75 95.3 17, 24, 32, 36 7-1/2"

4" 3-1/2" 4.0 101.6 4, 5, 6, 7.75, 10, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60 8" (7" - pipe)

4-1/4" 4.25 107.9 16, 30, 36, 48, 60 8-1/2"

4-1/2" 4" 4.5 114.3 6, 9, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60 9" (8" - pipe)

4-3/4" 4.75 120.7 36 9-1/2"

5" 5.0 127.0 5.5, 7.5, 12.5, 17, 22, 24, 30, 36, 42, 48, 60 10"

5" 5.563 141.3 15, 20, 24, 30, 36, 42, 48, 60, 72 10"

5-1/2" 5.5 139.7 30, 36 11"

6" 6.0 152.4 9, 15, 18, 24, 30, 36, 42, 48, 60, 72 12"

6" 6.625 168.2 18, 24, 30, 36, 42, 48, 60, 72 12"

8" 8.0 203.2 12, 20, 32, 48, 60, 72 16"

8" 8.625 219.1 24, 32, 40, 42, 48, 60, 72 16"

10" 10.75 273.1 40, 48, 50 20"

Capabilities subject to change without notice.

OUTSIDE DIAMETER

For PNEUMATIC SYSTEMS … Short and Long Radius

COMMON CENTERLINE STD. TANGENT

ORDER BENDS: By O.D., wall thickness, alloy, degree of bend, centerline radius and tangent.

WALL THICKNESS: 16 ga. (.063), 14 ga. (.083), and 11 ga. (.120) in tubing.

Schedules 5, 10 and 40 pipe. Other wall thicknesses on request.

MATERIALS: Aluminum is 6063-T1 extruded. Stainless is T304 ASTM A312 for pipe and T304 ASTM A249 for tubing.

Carbon steel ASTM A53 for pipe; A513 for tubing. Galvanized A53 for galvanized-coated pipe and A513 for
galvanized-coated tubing. Aluminized tubing is
ASTM A787.

STOCK TUBE BENDS

Morris maintains an extensive inventory of tube
bends available for 24-hour shipment. Most
popular bend sizes are stocked in carbon
steel, aluminum and stainless materials.

Call MORRIS COUPLING for all your pneumatic conveying line needs.

2240 W. 15th St. • Erie, PA 16505 • 814-459-1741
Phone: [phone] • Fax: [phone]
www.morriscoupling.com
e-mail: [e-mail]

PIPE DIMENSIONS

AND WEIGHTS

O.D.
PIPE
SIZE

1

1

3

1

3

1 1.315 .

11⁄4 1.660 1.107 1.107 1.806 1.806 2.273 2.273 2.997 2.997 3.765 5.214

11⁄2 1.900 1

2 2.375 1.604 1.604 2.638 2.638 3.653 3.653 5.022 5.022 7.462 9.029

21⁄2 2.875 2.475 2.475 3.531 3.531 5.793 5.793 7.661 7.661 10.01 13.70

3 3.500 3

31⁄2 4.000 3.472 3.472 4.937 4.937 9.109 9.109 12.51 12.51 22.85

4 4.500 3.915 3.915 5.613 5.613 10.79 10.79 14.98 14.98 19.00 22.51 27.54

IN

INCHES

⁄8 .405 .1383 .1863 .1863 .2447 .2447 .3145 .3145

⁄4 .540 .2570 .3297 .3297 .4248 .4248 .5351 .5351

⁄8 .675 .

⁄2 .840 .5383 .5383 .6710 .6710 .8510 .8510 1.088 1.088 1.304 1.714

⁄4 1.050 .6838 .6838 .8572 .8572 1.131 1.131 1.474 1.474 1.937 2.441

s 5 10s 10 20 + 30 40

5

035 .049 .049 .068 .068 .095 .095

.

.049 .065 .065 .088 .088 .119 .119

.049 .065 .065 .091 .091 .126 .126

3276 .4235 .4235 .5676 .5676 .7388 .7388

065 .065 .083 .083 .109 .109 .147 .147 .187 .294

.

.1860 .2320 .2940 .3760 .4510

.065 .065 .083 .083 .113 .113 .154 .154 .218 .308

2370 .2970 .3910 .5100 .6700

.

.065 .065 .109 .109 .133 .133 .179 .179 .250 .358

8678 .8678 1.404 1.404 1.679 1.679 2.172 2.172 2.844 3.659

.3000 .4860 .5810 .7510 .9840

065 .065 .109 .109 .140 .140 .191 .191 .250 .382

.

.3830 .6250 .7860 1.037 1.302

.065 .065 .109 .109 .145 .145 .200 .200 .281 .400

.274 1.274 2.085 2.085 2.718 2.718 3.631 3.631 4.859 6.408

.4410 .7210 .9400 1.256 1.681

065 .065 .109 .109 .154 .154 .218 .218 .344 .436

.

.5550 .9130 1.264 1.737 2.575

.083 .083 .120 .120 .203 .203 .276 .276 .375 .552

8560 1.221 2.004 2.650 3.464

.

.083 .083 .120 .120 .216 .216 .300 .300 .438 .600

.029 3.029 4.332 4.332 7.576 7.576 10.25 10.25 14.32 18.58

1.048 1.498 2.621 3.547 4.945

083 .083 .120 .120 .226 .226 .318 .318 .636

.

1.201 1.720 3.151 4.326

.083 .083 .120 .120 .237 .237 .337 .337 .438 .531 .674

.354 1.942 3.733 5.183 6.560 7.786

1

41⁄2 5.000

5 5.563 6.349 6.349 7.770 7.770 14.62 14.62 20.78 20.78 27.04 32.96 38.55

6 6.625 7.585 7.585 9.290 9.289 18.97 18.97 28.57 28.57 36.39 43.35 53.16

.109 .109 .134 .134 .258 .258 .375 .375 .500 .625 .750

2.196 2.688 5.057 7.188 9.353 11.40

.109 .109 .134 .134 .280 .280 .432 .432 .562 .719 .864

2.624 3.213 6.564 9.884 12.59 15.67

7 7.625

8 8.625 9.914 9.914 13.40 13.40 22.36 24.70 28.55 28.55 35.64 43.39 43.39 50.95 60.71 67.76 74.79 72.42

.109 .109 .148 .148 .250 .175 .277 .322 .322 .406 .500 .500 .594 .719 .812 .906 .875

3.429 4.635 7.735 5.463 8.543 9.878 12.33 15.01 17.60 20.97 23.44 25.84

9 9.625

10 10.75 15.19 15.19 18.65 18.70 28.04 34.24 40.48 40.48 54.74 54.74 64.43 77.03 82.29 104.1 115.6 104.1

.134 .134 .165 .165 .250 .279 .307 .365 .365 .500 .500 .594 .719 .844 1.000 1.125 1.000

5.256 6.453 9.698 10.79 11.34 14.00 18.93 22.25 26.61

11 11.75

12 12.75 21.07 22.18 24.16 24.16 33.38 43.77 49.56 53.52 73.15 65.42 88.63 107.3 125.5 136.7 160.3 125.5

14 14.00

16 16.00

18 18.00

20 20.00 39.78 46.05 52.73 78.60 104.1 78.60 123.1 166.4 104.1 208.9 256.1 296.4 341.1 379.2

.156 .165 .180 .180 .250 .375 .330 .375 .406 .500 .562 .500 .688 .844 1.000 1.125 1.312 1.000

.156 .188 .250 .312 .375 .375 .438 .594 .500 .750 .938 1.094 1.250 1.406

23.07 27.73 36.71 45.61 54.57 54.57 63.44 85.05 72.09 106.1 130.9 150.8 170.2 189.1

.165 .188 .250 .312 .375 .375 .500 .656 .500 .844 1.031 1.219 1.438 1.594

27.90 31.75 42.05 52.27 62.58 62.58 82.77 107.5 82.77 136.6 164.8 192.4 223.6 245.3

.165 .188 .250 .312 .438 .375 .562 .750 .500 .938 1.156 1.375 1.562 1.781

31.43 35.76 47.39 58.94 82.15 70.59 104.7 138.2 93.45 170.9 208.0 244.1 274.2 308.5

.188 .218 .250 .375 .500 .375 .594 .812 .500 1.031 1.281 1.500 1.750 1.969

8.359 11.55 17.14 15.14 18.52 22.63 25.31 30.62

PIPE SCHEDULES

40s &

STD.

.0850 .1090

.

.1960 .2560

.247 .355

12.54 17.61

.301 .500 .875

23.54 38.04 63.08

.342 .500

33.91 48.73

.375 .500

45.56 60.08

+

1470 .1850

80s &

0 80 100 120 140 160

6

E.H.

BLACK IN INCHES

RED FOOT IN POUNDS

BLUE PER FOOT IN POUNDS

WALL THICKNESS

STEEL WEIGHT PER

ALUMINUM WEIGHT

DBL.

E.H.

TUBING DIMENSIONS

TUBE GAUGE 18 17 16 15 14 13 12 11 1/8 10 9 5/32 873/16 6541/4 2

WALL THICK. .049 .058 .065 .075 .083 .095 .109 .120 .125 .134 .148 .156 .165 .180 .188 .203 .220 .238 .250 .280

2240 W. 15th St. • Erie, PA 16505
Phone: [phone] • Toll Free: 1-800/426-1579 • Fax: [phone]
www.morriscoupling.com • e-mail: [e-mail]

© Morris Coupling Company 2008

Printed in U.S.A. Core – 2.5M – 10/08