
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
WARNING:
-WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
-WARNING: Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
-WARNING: Do not damage the refrigerant circuit.
-WARNING: Do not use electrical appliances inside the food storage compartments
of the appliance, unless they are of the type recommended by the manufacturer.
-Do not store explosive substances such as aerosol cans with a flammable propellant
in this appliance.
This appliance is intended to be used in household and similar applications such as
staff kitchen areas in shops, offices and other working environments;
farm houses and by clients in hotels, motels and other residential type
environments;
bed and breakfast type environments;
catering and similar non-retail applications.
Caution:risk of fire(R600a)

1、freezer shelf
3、control knob refrigerator
6、door tray
4、shelf
2、control knob freezer
5、crisper
7、adjustable foot
Note: Figures in the user manual are only for reference. The actual product
may differ slightly.

30 minutes later, open the freezer compartment
door,feel the cold air,that means the unit works
properly.
After a period of time to set the compartment
temperature at the desired temperature.

R-TEMP control knob F-TEMP control knob
The left knob is used for controlling temperature of cooling while the right
one is for freezing.
TTurn the knob clockwise ,the cabinet temperature will be cooler,counter-clockwise,
the temperature will be raised.
urn the knob counter-clockwise ,the cabinet temperature will be coldr,clockwise,
the temperature will be raised.
Picture:
R-TEMP control knob
F-TEMP control knob

Discharge pipe
Make sure the fridge is unplugged before
you take out the water pan.

Light
cover
LED lamp
Please contact the service agent or similarly qualified persons
if the light need be changed.
Before changing the light board ,please unplug the fridge first,
then pull down the light cover and change the light board according
to the picture,as shown above .
Make sure the light board is 220-240V~/50Hz/2W.

Energy Saving Tips
· The appliance should be located in the coolest area of the room,
away from heat producing appliances or heating ducts, and out of the
direct sunlight.
· Let hot foods cool to room temperature before placing in the
appliance. Overloading the appliance forces the compressor to run
longer. Foods that freeze too slowly may lose quality, or spoil.
· Be sure to wrap foods properly, and wipe containers dry before
placing them in the appliance. This cuts down on frost build-up
inside the appliance.
· Appliance storage bin should not be lined with aluminum foil, wax
paper, or paper toweling. Liners interfere with cold air circulation,
making the appliance less efficient.
· Organize and label food to reduce door openings and extended
searches. Remove as many items as needed at one time, and close the
door as soon as possible.
REQUESTING ASSISTANCE OR SERVICE
If you have any doubt or extra assistance, please call:
Customer Service: Guangzhou Midea Hualing Refrigeraror Co.LTD.
Telephone: 4008899315
Address: No. 5 Xinguang si Road, Zhujiang Precinct, Nansha District,
Guangzhou, Guangdong, 511462, China
11