Morris S1254BLG Instruction Manual

BLENDER WITH GLASS JAR 1.7L AND COFFEE

GRINDER

MODEL NUMBER: S1254BLG

INSTRUCTION MANUAL

In order to have the product work better for you, please read the instruction s bef or e using

it. Please keep the instructions after reading for future r eference.

ATTENTION:

● Wrong operation and im pr oper handling may cause problems with the appliance and
injury to the user.

● The unit should be used only for the intended purposes. No liability is accepted by our
company for damages arising from improper use or fau lty handling.

● Before connect ing the device to the mains, please chec k w hether t he t y pe of supp ly and
the mains voltage match w ith the details stated on the nameplate on the appl i ance.

● Do not immerse the appliance and mains plug in water or ot her flu id s. If the appliance
falls into water, pull out the power plug immediat ely and have the appliance ch ecked by a
specialized technician before using it again. There i s danger to life from electrical shock!

● Do not try to open the housing your self! Do not insert any object int o t he housing.

● Do not use the appliance with w et hands, on wet floor or in a humid environ me nt.

● Do not hold the mains plug with w et or moist hands.

●Check the mains plug and ma in s adapter regularly for damages. I n ca se of damages,

have the power cord and mains plu g changed by the manufactur er , or a qualified expert,
in order to avoid danger.

● Do not operate the appliance, i f the power cable or the mains p lug appear to be
damaged or the unit falls to the floor or has been otherwise damaged. In such cases, bring
the unit to a workshop for checking and repairs, if necessar y.

● Do not ever try to repair the unit y our selves. There is danger from ele ct r ical shock!

● Do not let the power cord hang over sharp edges and keep it aw ay from hot object s and

flames. Pull the plug, not the cord, to re mov e it from the socket.

●Installation of a spike prot ector will offer additional prot ect ion with a nominal trigger
current of not more than 30 Ma in t he house installation. Please co nsult your installing
electrician.

● The cable as well any extension cable required should be laid in such a way that there
will not be any risk of anyone pull in g it in advertently or tripping over it.

●If a long extension cable is use d, it mu st be suitable for the power supply in question.
Otherwise it causes overheating of the cable and/ or plug.

● Install the unit on a rigid, flat and heat-proo f surface, away from flames (such as gas
oven) and do not operate it near children.

● This appliance is suitabl e neit her for commercial use nor for use outdoors.

● Children cannot understand the dangers caused b y improper handling of electrical

devices.

● Therefore, let children use household devices only under supervis ion.

● Pull out the plug out of the socket, when the appliance is not in use and als o bef or e

cleaning it.

● Caution! The appliance i s on pow er so l ong as it is connected to the power cir cuit .

● Switch off the unit before pulli ng out t he mains plug.

● Use only spare parts from the manufacturer or his local dealer.

● Never carry the unit by its pow er cor d.

● Do not remove individual housing components.

Caution:
Switch off the unit before cleaning it to avoid electric leakage and other dangers. When
the plug or power cord are damaged, do not use th e unit . Never disassemble the unit by
yourself, you must take it to the after-service center f or handling.

PARTS ITEM

1. Measure cup

2. Jar cover

3. Glass jar

4. Glass jar sealed ring

5. Blade components

6. Jar holder

7. Main body

8. Power cord&plug

9. Skidproof glue feet

10. Rotating switch

11. Aureola

12. Function button

13. Upper base of housing

14. Grinder jar

15. Grinder’s jar sealed ring

16. Blade components

17. Grinder’s jar holder

Installation

1．Clean the Measuring cup, Lid and Blending glass cup (except main body) and so on
before first use.
2．So as to make sure the unit is turned off, do not connect it before installation.
3． First install the Glass jar sealed ring into blade b ase, then enclose the blade base into
Blending glass jar and finally screw the jar holder on the base of t he glass jar.
4．Now you can place the entire glass jar on t he top of the main body of the mo tor. Please
pay attention to match the posit i on of blending glass cup and the bul ge of the motor main
body.
Fill the blending r eceptacle with the desired food. Please ensure the water is not sp i ll ed
over from cup.( Maximal water capacity can not exceed 1 700 m l). DO NOT USE THE
UNIT WITHOUT ANY MATERIAL INS IDE.
5．Put the lid on top of the blending g lass cu p and push it down. I nsert the c losure int o the
lid and turn till it locks into place.

6. Place the measuring cup on the center of the lid; turn the measur ing cup slightly
anticlockwise.

OPERATION

1． Connect to the pow er. Please ensure the rotatin g switch is turned to “OFF” before
connecting the power.
2． This unit has safety design features, it will not work if the blending glass ja r is not
installed properly on the main body of the motor.
3． Fill the glass jar with the desired food.

4. Put the jar cover on top of the bl ending glass jar and fix it. Place the measuring cup on
the center of the jar cover, turn t he mea sur ing cup slightly anticlockwise.
5．Put the glass jar on the upper base of the main body. The blue light of Aureole means
that power is connected.

6. If you want to use the grinder, open the grinder jar, then put the coffee b eans into the
grinder jar. The coffee bean cubage should be less than 60% of the tot al grinder cubage.
It is better this way. Fit and tighten on the grinder jar the grin der’s jar sealed rin g, the blade
components and finally the grind er’s jar hold er . Then, put t he whole grinder int o the upper
holder of the housing. You can start blending coffee beans.

7．When you turn the knob t o ”ON”, the functions of “SMOOTHIE”（milk shake）、“ICE” and
“PULSE” are avai lab le. Press one of the buttons, that button lights up and start s.
8．To choose the speed from the knob, please turn the knob between “MIN” (low speed)
and “MAX” (high speed) in order to select the required speed.
8．Please stop the applia nce after operating it continuously for 1 minute.

Speed adjustment and function button

1. SMOOTHIE
——Stainless steel blade base stays at high speed, suitable for uniform blending.

2. ICE
——Stainless steel blade base stays at high speed, running for 6 seconds then stops for

3 seconds, suitable for ble ndi ng ice.

3. PULSE
——Keep this button pushed. Stainless steel blade base stays at high speed, and unit

stops working after you let it go.

4. MIN
——Stainless steel blade base stays at low speed.

5. MAX
——Stainless steel blade base stays at high speed.

6. ON

——The unit connected to electricity and the functions “SMOOTHIE”、“ICE”
and “PULSE” are available.

7. OFF
——Not connected to electricity.

Caution:

1. Overfilling may block the operation, please t urn off the unit a nd disconnect the
plug, take out some of material, then operate.

2. Do not use the unit continuously for more than 1 minute.

CLEANING AND STORAGE

1. In addition to this section, you must refer to the security preca ut i ons too.

2. Do not clean the Motor main body, power cord and plug w ith water.

3. Clean the engine base w it h a soft, wet piece of cloth and a mild cleaning agent.

4. Fill the glass jar half-full with hot water and a small quantity of a cleaning agent. Let t he

unit run on min (minimum) speed until the glass jar i s clea n.

5.The base can be taken apart fro m the blades . Unscrew the base counter-clockwise.

Take out the blades together w ith the sealing ring facing upw ar ds.

6. Now clean the glass jar, jar cover, closure, base and blades with sealing ring or speed

blender with hot water and some cleaning agent. Dry w ell befor e r e-using.
Caution! The blades inside the glass jar and speed blender are very sharp.

7. Never use drastic clean ing agents.

Warning:

Do not touch the sharp blades while cleaning, please wipe with a dish cloth, to

avoid accidental injury.

SPECIFICATION

Rated voltage : 230V/50Hz
Power ： 700W
Capacity ： 1.7L

Operating time ： 1 minute

NOTE：

1. Unit suitable for household use only.

2. Do not use for comme rcial purposes, otherwise the exclusive

importer bears no responsibility for any damage.

Notice about recycling

Your product is designed and manufactured with high quality materials and

components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life,

should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste

collection/recycling centre. In the European Union there are separate collection systems for used
electrical and electronic products. Please help us to conserve the environment we live in!

DECLARATION OF
CONFORMITY

This product complies with the requirement of directives
EMC-Directive: 2004 / 108 / EC
Low Voltage Directive: 2006 / 95 / EC
CE Marking: 93 / 68 / EEC
ErP Directive: 2005 / 32 / EC
declare that the Blender model: S1254BLG
is in compliance with following norms:
EN 55014-1:2006
EN 55014-2:1997+A1:2001
EN 61000-3-2:2006
EN 61000-3-3:1995+A1:2001+A2:2005
EN 60335-2-14:2006
EN 50366:2003+A1:2006
EN 62301:2005

Amiridis – Savidis S.A.

EXCLUSIVE IMPORTER IN GREECE:

 33, Vas. Olgas Street – P. O. 54641 – Thessaloniki, Greece.

Tel: [phone], Fax: [phone]

 45 Posidonos St. – O.P. 18344 – Moschato, Athens, Greece

Tel: [phone], Fax: [phone]

www.morris.gr | [e-mail]