Morris Pipe and Tube Bends User Manual

D

C

19

2240 W. 15th St., Erie, PA 16505
Phone: [phone]

For Prices and Delivery

Call Toll Free: 1-800-426-1579
Toll-Free Fax: [phone]
E-mail: [e-mail]
internet: www.morriscoupling.com

Pipe and Tube Bends for pneumatic systems, short and long radius

Morris Pipe and
Tubing Straights

Straight lengths of pipe and tubing
are available in carbon steel,
aluminum, and stainless –
1-1⁄2" O.D. thru 10" pipe in
a variety of wall thicknesses.

ORDER BENDS by O.D., wall thickness,
alloy, degree of bend, centerline radius and
tangent.

WALL THICKNESS: 16 ga. (.063), 14 ga.
(.083), and 11 ga. (.120) in tubing.
Schedules 5, 10 and 40 pipe. Other wall
thicknesses
on request.

*Carbon Steel, Schedule 40 Only.
MATERIALS: Aluminum is 6063-T1

extruded. Stainless is T304 ASTM A312
for Pipe and T304 ASTM A249 for tubing.
Carbon steel ASTM A53 for pipe; A513
for tubing. Galvanized A53 for galvanized
coated. Pipe and A513 for galvanized­coated tubing.

OD A B

2" 16" 8"
3" 16" 8"
4" 16" 8"

4-1/2" 18" 9"

5" 18" 9"
6" 20" 10"
8" 24" 12"

OD 30° 45° 60°

CDCDCD
2" 8" 8" 8" 8" 8" 8"
3" 8" 8" 8" 8" 8" 8"
4" 8" 8" 8" 8" 8" 8"

4-1/2" 10" 10" 10" 10" 10" 10"

5" 11" 11" 11" 11" 11" 11"
6" 12" 12" 12" 12" 12" 12"
8" 14" 14" 14" 14" 14" 14"

OD 30° 45° 60°

EFEFEF
2" 8" 16" 8" 16" 8" 16"
3" 10" 20" 8" 16" 8" 16"
4" 12" 24" 10" 20" 10" 20"

4-1/2" 12" 24" 10" 20" 10" 20"

5" 15" 30" 12" 24" 12" 24"
6" 18" 36" 15" 30" 15" 30"
8" 22" 40" 18" 36" 18" 36"

ORDER TEES by tube or pipe size, wall thickness, and metal. O.D.s not listed, available on request.
ORDER LATERALS and WYES by tube or pipe size, wall thickness, metal and degree of angle.

Tube Pipe

Outside Diameter

Common Centerline Std. Tangent

Size Size inches mm Radii (CLR) Inches (ST)

1" 1.0 25.4 3, 4, 6, 12 4"

1" 1.315 33.4 3, 5 4"

1-1/4" 1.25 31.8 3, 7.25 4"

1-1/4" 1.660 42.2 3.5, 4, 6.25 4"
1-1/2" 1.5 38.1 2.5, 6, 7.5, 9, 12, 15, 18, 24, 30, 36 4"
1-3/4" 1.75 44.5 2.5, 8, 9, 12, 15, 24, 30, 36, 48 4"

1-1/2" 1.9 48.3 5, 6, 7.5, 9, 10, 12, 18, 24, 30, 36, 48 4"
2" 2.0 50.8 2.5, 5, 6, 8, 8.5, 9, 10, 12, 15, 18, 24, 30, 36, 48 4"
2-1/8" 2.125 54.0 5, 12, 24, 30, 36 4-1/4"
2-1/4" 2.25 57.2 3, 9, 12, 15, 17, 24, 30, 36 4-1/2"

2" 2.375 60.2 6, 7.5, 9, 10, 12, 15, 17, 24, 30, 36, 48 4"
2-1/2" 2.5 63.5 4, 6, 9, 12, 15, 17, 24, 30, 36, 48 5"
2-3/4" 2.75 69.9 17, 30, 36, 48 5-1/2"

2-1/2" 2.875 73.0 12, 12.5, 15, 17, 24, 30, 36, 60 5"
3" 3.0 76.2 4.5, 7.5, 9, 10, 12, 15, 18, 24, 30, 36, 48, 60 6"
3-1/4" 3.25 82.6 17, 30, 36 6-1/2"
3-1/2" 3" 3.5 88.9 3.5, 6, 8.75, 12, 15, 16, 18, 24, 30, 36, 48 7" (6" - pipe)
3-3/4" 3.75 95.3 17, 24, 32, 36 7-1/2"
4" 3-1/2" 4.0 101.6 6, 10, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60 8" (7" - pipe)
4-1/4" 4.25 107.9 16, 30, 36, 48, 60 8-1/2"
4-1/2" 4" 4.5 114.3 6, 9, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60 9" (8" - pipe)
4-3/4" 4.75 120.7 36 9-1/2"
5" 5.0 127.0 7.5, 12.5, 17, 22, 24, 30, 36, 42, 48, 60 10"

5" 5.563 141.3 15, 20, 24, 30, 36, 42, 48, 60, 72 10"
5-1/2" 5.5 139.7 30, 36 11"
6" 6.0 152.4 9, 15, 18, 24, 30, 36, 42, 48, 60, 72 12"

6" 6.625 168.2 18, 24, 30, 36, 42, 48, 60, 72 12"
8" 8.0 203.2 12, 20, 32, 48, 60, 72 16"

8" 8.625 219.1 24, 32, 40, 48, 60, 72 16"

10" 10.75 273.1 40, 50 20"

Tube Bending Capabilities

Pipe and tube bends of up to 180°

are readily available in
aluminum, stainless, carbon steel and galvanized in the
sizes listed. Other centerline radii are available but not
shown. Special shapes, ‘U’ bends, offsets, and bifurcat­ed bends available upon request.

Morris tube bends are manufactured in our Knoxville,
Tennessee, Plant.

TEES WYES LATERALS

Capabilities subject to change without notice.

ST

CLR

S
T

d = Degrees Bend Angle

O.D.

A

B

E

F

Morris Pipe and Tube Material Specifications

Aluminum Pipe and Tubing

■

Alloy 6063 ASTM B-221

6063 T-6 Straights
6063 T-1 Bends

Carbon-Steel Pipe and Tubing

■

Pipe ASTM A-53 This specification covers seamless and welded black and galvanized

steel pipe

Tube ASTM A-513 This specification covers electric-resistance welded-carbon and alloy

steel tubing for use as mechanical tubing.

Stainless-Steel Pipe and Tubing

■

Pipe ASTM A-312 This specification covers seamless and welded stainless-steel pipe

intended for high-temperature and general corrosive service.
Twenty-four grades are covered, the most common of which are 304,
316, 304L and 316L

Tube ASTM A-249 This specification covers stainless-steel tubing for general corrosion

resisting and low- or high-temperature service.

Galvanized Pipe and Tubing

■

Pipe ASTM A-53 Galvanized coated pipe

Tube ASTM A-513 Galvanized coated tube

ASTM Galvanized tube

For Prices and Delivery

Call Toll Free: 1-800-426-1579
Toll-Free Fax: [phone]
E-mail: [e-mail]
internet: www.morriscoupling.com

2240 W. 15th St., Erie, PA 16505
Phone: [phone]