Morphy richards WASHABLE HEATED UNDERBLANKET user Manual

Washable heated underblanket
Please read and keep these instructions
getting the best from your new heated bedding...
Safety
• For your safety, the in-built system in this product will
automatically shut off the power if it reaches a
It will also shut off automatically if any unsafe situation
should arise.
Washing instructions
• Before washing, detach the switch control and lead
from the blanket.
UK
Helpline: 0870060 2614
Ireland 1800 409089
www.morphyrichards.com
For replacement parts, help with using your Morphy Richards
products and lots more, contact us by phone or through our website
3 Heat setting
75142 rev1 17/3/06 10:10 AM Page 1
2
Important safety instructions
The use of any electrical appliance requires the following of basic common sense safety rules.
Primarily there is danger of injury or death and secondly the danger of damage to the appliance. These are indicated in the text by the following two conventions:
WARNING: Danger to the person!
IMPORTANT: Damage to the appliance!
In addition we offer the following essential safety advice.
Care instructions
• Examine frequently for any signs of wear
or damage to the blanket, switch or cord. In case of damage or misuse, cease using and contact The After Sales service helpline (See page 6)
• During the summer, the blanket can be
used to air the mattress. To store, roll in a towel and store in a dry place.
•Avoid folding or creasing the blanket once
unpacked.
• Do not dry clean the blanket, follow
washing instructions on the label attached to the blanket and the details that relate to your blanket.
Personal safety
• Do not use with a helpless person, an infant or a person insensitive to heat.
•Young children should be instructed on how to operate the controls safely and heat settings should be controlled by a parent or guardian.
• Do not use a hot water bottle at the same time as using the blanket.
Product safety
• Ensure the blanket is used in the manner in which it is intended, either as an overblanket or underblanket as appropriate.
• If used on an adjustable bed, check the blanket or cord cannot become trapped or rucked.
• Ensure the product is correctly fitted to the bed, following the instructions in this booklet.
• Do not insert pins or any sharp objects into the blanket.
• Do not tuck the heated part of material under the mattress.
• Do not use if the blanket is wet.
•Avoid pressing creases or folds into the blanket. Do not switch on if the blanket is folded, creased or rucked.
• Do not use any lead, switch or cord other than the one supplied with this blanket.
• Do not coil or lay the lead on the blanket.
• Not intended for medical use in hospitals.
All Morphy Richards heated blankets have been manufactured to the highest European standards. This product has been comprehensively tested for all known safety situations, so you can relax in the knowledge that it will provide warmth, comfort and peace of mind.
IMPORTANT INSTRUCTIONS PLEASE READ CAREFULLY AND RETAIN FOR FUTURE USE
75142 rev1 17/3/06 10:10 AM Page 2
3
Electrical requirements
Check that the voltage on the rating label of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted.
WARNING: The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live socket outlet.
Should the fuse in the 13 amp plug require changing, a 3 amp BS1362 fuse must be fitted.
This appliance does not need to be earthed. It is a double insulated product.
Before use
Before using this appliance ensure that the voltage indicated on the product corresponds with the mains voltage in your home. If you are in any doubt about your supply, ask your electrical dealer or local electricity company.
WARNING: Do not attempt to use the blanket with controls other than those supplied with the unit.
It is quite normal for the switch to become warm as the components encased are part of the protection circuit.
Safeguard overheat protection system
Activation
The system will remain dormant indefinitely as long as the blanket is operating in the normal temperature range. If for any reason the blanket is operated in an abnormal situation or condition which would otherwise have induced a rapid temperature rise high enough to constitute a hazard the OVERHEAT SYSTEM should intervene by cutting off the supply current before the temperature reaches the point at which damage may occur.
It is normal for the lead from the blanket to the switch to become warm as this is part of the heater protection circuit extended to the switch.
In the event of the OVERHEAT SYSTEM operating, the blanket will cease to function.
WARNING: No attempt should be made to repair the blanket or have it repaired locally and the switch supplied must never be replaced since the specialised components are not generally available.
The fact that this blanket incorporates the overheat system does not absolve the user from observing these instructions.
75142 rev1 17/3/06 10:10 AM Page 3
Loading...
+ 4 hidden pages