VC71067 MUK Rev5
* Register online for your 3 year guarantee. See back of this instruction book for details. (UK and Ireland customers only)
*
Endurance Bagless
Cylinder Vacuum Cleaner
Helpline
If you are having a problem with your appliance,
please call our Helpline, as we are more likely to
be able to help than the store you purchased the
item from. Please have the product name, model
number and serial number to hand when you call
to help us deal with your enquiry quicker.
UK Helpline: 0844 871 0960
IRE Helpline: 1800 409 119
Spares: 0844 873 0726
Contact us
www.morphyrichards.co.uk/blog
For competitions, product hints and tips
and more join us at
www.facebook.com/morphyrichardsuk
@loveyourmorphy
VC71067MUK Rev5_Instruction Book 19/09/2012 13:40 Page 1
Please read and keep these instructions for future use
2
Health and Safety
•
WARNING: Whenever the cleaner is in use, due to
the risk of entrapment in rotating parts, keep loose
clothing, hair, fingers etc. away from the brush bar,
nozzle and any hand-held accessories.
•
WARNING: Disconnect from the mains supply
before carrying out any routine maintenance, such
as cleaning any blockages, changing any filters or
accessing the floor nozzle.
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge, if they have been given supervision
or instruction concerning the use of the appliance in
a safe way and understand the hazards involved.
•
Children shall not play with the appliance.
•
Cleaning and user maintenance shall not be
undertaken by children without supervision.
Personal safety
• WARNING: Only lift the product by the carry handle (7).
•
Always disconnect the appliance from the mains supply
after use.
• Never use in the presence of explosive liquid or vapours.
• Never pick up inflammable or poisonous liquids such as
petrol, copier toner or other volatile substances. Never
pick up acids, asbestos or asbestos dust.
• Never touch the plug or cable with wet hands.
• Do not immerse cord, plug or cleaner in water or other
liquid.
• The appliance must never be left running unsupervised.
Location
• Do not use or keep this product outside.
• Do not store the appliance near hot surfaces eg. ovens
or heating appliances.
Mains cable
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent, or similarly qualified
person to avoid a hazard.
• Do not allow the mains lead to become strained or run
this appliance over it.
Product safety
• Never use the appliance without the filters being
installed.
• Never use the appliance to vacuum hot ashes, broken
glass, sharp objects or liquids.
• Use only Morphy Richards spare parts and accessories.
• Never modify the cleaner in any way.
• Repairs to electrical appliances are only to be
undertaken by trained professionals. Unprofessional
repairs can be dangerous for users.
Electrical requirements
• Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating Current).
• Should the fuse in the mains plug require changing, a 13
amp BS1362 fuse must be fitted.
The use of any electrical appliance requires the following common sense safety rules.
Please read these instructions carefully before using the product.
VC71067MUK Rev5_Instruction Book 19/09/2012 13:40 Page 2
3
Features
(1) Hose handle with
suction control
(2) Tube(s): 2 separate
extension tubes, or 1
single telescopic tube
(length adjustable),
dependent on model
(3) Hose
(4) Hose inlet
(5) Dust canister
(6) Dust canister release
button
(7) Carry handle
(8) Automatic cable rewind
button
(9) On/Off button
(10) Eco Switch
(11) Power plug and cord
(12) Tube standby slot
(13) Tool storage drawer
(14) Exhaust filter cover
(15) Exhaust filter
(16) Dust canister lid handle
(17) Dust canister empty
button
(18) Dust canister lid
(19) Pleated, washable dust
canister filter
(20) Mesh filter cover
(21) Dust canister lid release
(22) Filter cleaning brush
(23) Combination floor nozzle
(24) Brush adjustment switch
(25) Upholstery nozzle
(26) Dusting brush
(attaches to (25))
(27) Crevice tool
NOTE: (25), (26), (27) are
stored in the tool storage
drawer
(13)
(28) Turbo nozzle
(certain models only)
Product overview
2
1
3
5
6
7
4
14
15
22
2423
25
26
27
28
8
9
11
10
12
13
18
19
20
5
21
17
16
VC71067MUK Rev5_Instruction Book 19/09/2012 13:40 Page 3
4
Operating / Assembly
Push the 360° rotating head on the hose (3) into
the hose inlet (4) on the vacuum cleaner.
To remove, press the buttons on the hose
connector and pull out.
Attach either the extension tubes or the
telescopic tube (2) (dependent on model) to the
handle end (1) of the hose (3). Extend the
telescopic tube to the required length by
pressing down the tube release button and
pulling out the tube. Attach the required
accessory to end of the tube.
Always pull out the power cord (11) to its
maximum length (indicated by the yellow tag on
the cable). Plug the appliance into the mains
supply. Push the On/Off button (9) to start the
motor.
IMPORTANT: Ensure that the appliance is never
left unattended whilst it is switched on.
Close Open
The suction power can be varied to suit the
surface being cleaned by using the Eco Switch
(10), (see the table on page 5 for guideline
settings).
The suction power can also be adjusted using
the suction control
(1) on the hose handle.
Closed: full suction
Open: reduced suction
During short breaks in cleaning, the tube(s) (2)
can be held in an upright, ‘standby’ position.
Rotate the floor nozzle (23) or (28) until the lug
on the neck can be fitted into the tube standby
slot (12) on the rear of the appliance, whilst you
move furniture for instance.
Switch off the appliance. Remove the plug from
the mains supply and rewind the power cable
using the cable rewind button (8).
WARNING: When using the cable rewind,
always hold the plug as the cable will rewind
quickly.
VC71067MUK Rev5_Instruction Book 19/09/2012 13:40 Page 4
1
3
2
4
5
6
5
Operating / Assembly (continued)
To obtain the best results from your cleaner,
empty the dust canister (5) regularly, otherwise
the airflow and cleaning power will be reduced.
1. Unplug the cleaner from the mains outlet.
2. Press the dust canister release button (6), pull
back the hinged lid by the carry handle (7) (as
shown) and pull the canister away from the main
body.
3. Hold the dust canister (5) over a dustbin. Turn the
yellow dial (a minimum of 5 revolutions) to agitate
the fine dust between the filter pleats and restore
the air flow.
4. Press the dust canister empty button (17) near
the handle (16) on the dust canister lid (18). This
opens the door at the base of the canister for the
contents to be emptied out (as shown).
5. Re-attach the dust canister to the main body.
Feed the base onto the unit first and push the top
back until it clicks into place. Then push the
hinged lid back into place to secure the canister.
Allergy sufferers
When emptying any vacuum cleaner, it is difficult
to avoid exposure to dust. To minimise this risk,
please ensure that you encase the dust canister
in a large bag to empty it. Close the bag as tightly
as possible round the dust canister. Remove the
dust canister and close the bag as tightly and
quickly as possible and dispose of this
immediately. It is advisable to wear disposable
gloves and a face mask while emptying the
cleaner. If at all possible, ask a non allergy
sufferer to empty the dust canister when required.
Using tools and accessories
The appropriate cleaning tool (25) or (27) can
be attached directly to the hose handle (1), or
the tube(s) (2) can be used between the hose
handle and the tool.
The crevice tool
(27)
, upholstery nozzle
(25)
, and
dusting brush attachment
(26)
may be stored in
the tool storage drawer
(13)
at the rear of the
vacuum cleaner.
Unwind the power cord (11) and plug in to the mains outlet as in step 3 of ‘Operating / Assembly’, page 4.
Eco Switch
power setting
Application
Curtains
and delicate
fabrics
Shelves
and hard
surfaces
Floor
coverings,
such as rugs,
economy
setting for
carpets
Textiles and
upholstery
Carpets or
hard floor
coverings
VC71067MUK Rev5_Instruction Book 19/09/2012 13:40 Page 5
7
6
Combination floor nozzle (23)
This nozzle is suitable for general purpose
cleaning on a wide variety of floor coverings.
Turbo nozzle (28) (certain models only)
This nozzle is suitable for cleaning and
rejuvenating cut pile carpets and is ideal for
picking up stubborn dirt and pet and human hairs.
Cleaning the turbo nozzle
(certain models only)
The turbo nozzle (28) should be regularly cleaned
and any hairs or fibres wrapped around the brush
bar removed to maintain optimum performance.
Upholstery nozzle (25)
This nozzle is ideal for textiles, carpet, upholstery
and stairs etc.
Dusting brush (26)
This tool is ideal for vacuuming pelmets and
delicate objects and surfaces. This attachment
clips on to the upholstery nozzle
(25).
Crevice tool (27)
This tool is ideal for awkward places, corners, and
behind radiators etc.
When finished cleaning, switch off the appliance
and remove the plug from the mains supply. Press
and hold the automatic cable rewind button
(8) until
the power cord
(11) retracts fully into the machine.
NOTE: Always store the vacuum cleaner base down.
If the cleaner overheats, a motor protection
thermostat will automatically switch the motor
off. If this happens, switch the cleaner off,
unplug from the power supply and leave the
cleaner to cool for at least 60 minutes. Check
the airways for blockages, empty the dust
canister and clean the filters before restarting.
The guarantee may be invalidated if the motor is
damaged due to: using the appliance without
the filters installed; not cleaning the filters; or
not replacing damaged filters.
Cleaning the dust canister filter (19)
To maintain suction, the dust canister filter must
be cleaned each time the dust canister
(5) is
emptied.
1.
Follow steps 1-4 of point 7 of ‘Operating / Assembly’,
page 5.
2. Access the filter assembly by removing the dust
canister lid
(18). Slide the lid release button (21)
down then rotate the lid anti-clockwise.
Tools and accessories
Storage
Safety cut-out
Maintenance - Filters
21
Standard accessories Application
Shelves and hard surfaces
Textiles and upholstery
Carpets and other textile
floor coverings (brushes up
on combination floor nozzle)
Settings for heavy dirt and
smooth floors (brushes down
on combination floor nozzle)
26
27
24
25
2
25
26
25
24
23
23
24
28
VC71067MUK Rev5_Instruction Book 19/09/2012 13:40 Page 6
7
3. Rotate the mesh filter cover (20) clockwise to
disassemble the filter assembly.
4. Use the filter cleaning brush (22) to remove any
fluff from the outside of the mesh filter cover
(20)
or in between the pleats of the dust canister filter
(19).
IMPORTANT: The filter and cover may also be
washed but must be left to thoroughly air dry
before re-use.
IMPORTANT: Do not wash the filter and cover
with hot water or detergents.
IMPORTANT: Do not use heated appliances to
dry the filter or cover.
5. To re-assemble, locate the dust canister filter into
the lid then secure into place with the mesh filter
cover by rotating the mesh filter cover
anti-clockwise.
6. Fit the lid with filter assembly onto the canister,
then rotate clockwise until it locks into place.
7. Re-attach the dust canister to the main body.
Feed the base onto the unit first and push the top
back until it clicks into place. Then push the
hinged lid back into place to secure the canister.
Replacing the exhaust filter
To maintain high efficiency, the exhaust filter
should be replaced every 6 months.
The exhaust filter (15) is located behind the exhaust
filter cover
(14) at the rear of the vacuum cleaner.
1. Release the filter cover by pressing down on the
release lever.
2. Remove the exhaust filter.
3. To refit the filter, first hook the top of the filter into
the filter recess then push the bottom of the filter
into location.
4. After fitting the filter, re-fit the exhaust filter cover
by hooking the bottom of the cover in first and
then pushing the top into place until it clicks fully
closed.
Cleaning and maintenance
Unplug from the mains supply before cleaning.
The vacuum cleaner, especially the dust
compartment and all accessories, can be cleaned
using a damp cloth or a non-abrasive domestic
cleaner and wiped dry.
To keep the underside of the combination floor
nozzle clean, vacuum it at regular intervals using
the crevice tool.
Purchasing filters
Use only genuine replacement filters which can
be purchased from specialist retailers or by
calling our spare parts helpline number:
0844 873 0726.
Hints and tips
7
VC71067MUK Rev5_Instruction Book 19/09/2012 13:40 Page 7
18
19
5
20
21
VC71067 MUK Rev5 09/12
The After Sales Division
Morphy Richards Ltd
Mexborough,
South Yorkshire,
England, S64 8AJ
IF YOU ARE HAVING A PROBLEM
WITH ONE OF OUR PRODUCTS,
CALL OUR HELPLINE:
UK: 0844 871 0960
EIRE: 1800 409 119
SPARES: 0844 873 0726
Your standard 1 year guarantee is extended for an
additional 2 years when you register the product within 28
days of purchase with Morphy Richards. If you do not
register the product with Morphy Richards within 28 days,
your product is guaranteed for 1 year. To validate your 3
year guarantee, register with us online at
www.morphyrichards.co.uk
Or call our customer registration line
UK 0844 871 0962
IRE 1800 409 119
N.B. Each qualifying product needs to be registered with
Morphy Richards individually.
Please note that the 3 year guarantee is only available
in the UK and Ireland. Please refer to the 1 year guarantee
for more information.
To qualify for the 1 year guarantee, the appliance must
have been used according to the instructions supplied.
It is important to retain the retailer’s receipt as proof of
purchase. Staple your receipt to this back cover for future
reference.
Please quote the following information if the product
develops a fault. These numbers can be found on the base
of the product.
Model no. Serial no.
All Morphy Richards products are individually tested before
leaving the factory. In the unlikely event of any appliance
proving to be faulty within 28 days of purchase, it should
be returned to the place of purchase for it to be replaced.
If the fault develops after 28 days and within 1 year (3
years if registered) of original purchase, you should contact
the Helpline number quoting Model number and Serial
number on the product, or write to Morphy Richards at the
address shown.
You may be asked to return a copy of proof of purchase.
Subject to the exclusions set out below (see Exclusions),
the faulty appliance will then be repaired or replaced and
dispatched usually within 7 working days of receipt.
If you suspect a fault, follow the simple checks detailed
below before retrying the appliance or calling the helpline.
• Check the filters for blockages and clean.
• Check the tools / tubes for blockages.
• Check the plug is firmly in the socket.
• Check the socket is working by trying another appliance.
• Check the fuse in the plug.
• If the filters were blocked or another blockage was noted,
leave the product switched ‘off’ for 60 minutes and retry
switching on (as safety cut-out may have activated).
If, for any reason, this item is replaced during the 1 year
guarantee period, the guarantee on the new item will be
calculated from original purchase date. Therefore it is vital
to retain your original till receipt or invoice to indicate the
date of initial purchase.
This appliance is intended for domestic use only. Misuse
or use for commercial or any other purpose will render the
guarantee invalid.
Morphy Richards shall not be liable to replace or repair the
goods under the terms of the guarantee where:
1 The fault has been caused or is attributable to accidental
use, misuse, negligent use or used contrary to the
manufacturer’s recommendations or where the fault has
been caused by power surges or damage caused in transit.
2 The appliance has been used on a voltage supply other
than that stamped on the products.
3 Repairs have been attempted by persons other than our
service staff (or authorised dealer).
4 The appliance has been used for hire purposes or non
domestic use.
5 The appliance is second hand.
6 Morphy Richards reserves the right not to carry out any
type of servicing under the guarantee at its discretion.
7 The guarantee excludes consumables such as the filters.
• This guarantee does not confer any rights other than those
expressly set out above and does not cover any claims for
consequential loss or damage. This guarantee is offered
as an additional benefit and does not affect your statutory
rights as a consumer. Morphy Richards products are
intended for household use only. See usage limitations
within the location safety instructions.
Morphy Richards has a policy of continuous improvement
in product quality and design. The company, therefore
reserves the right to change the specification of
its models at any time.
For electrical products sold within the
European Community. At the end of the
electrical products useful life, it should not be
disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority
or retailer for recycling advice in your country.
Exclusions
Registering your 3 year
guarantee
Your 1 year guarantee
Disclaimer
VC71067MUK Rev5_Instruction Book 19/09/2012 13:40 Page 8
Loading...