Morphy Richards Turbo steam iron steam, Turbosteam 40669, Turbosteam 40662, Turbosteam 40659 Instructions Manual

Turbo steam iron steam/spray/shot

Please read and keep these instructions

Getting the best from your new iron....

Safety first

Caution must be used when handling this appliance as it
does get very hot. Always switch off the unit and allow to
cool before cleaning or storing.

Jet cleaning

Your iron will give the best ironing results and will last longer
if you apply jet cleaning after each period of ironing.

RN40655 MUK Rev 3

For replacement parts, help with using your Morphy Richards product,
problems and lots more, contact us by phone or through our website.

UK Helpline: 0870 060 2615
Replacement parts: 0870 167 6646
Ireland 1800 409119

22

IMPORTANT
SAFETY
INSTRUCTIONS

The use of any electrical
appliance requires the
following common sense
safety rules.

Primarily there is danger of
injury or death and
secondly the danger of
damage to the appliance.
These are indicated in the
text by the following two
conventions:

WARNING: Danger to
the person!

IMPORTANT: Damage to
the appliance! In addition
we offer the following
safety advice.

Location

• Do not use outdoors.

• The iron must be used and
rested on a stable surface.

Children

• Close supervision is
necessary when any
appliance is used near
children.

Personal safety

• WARNING: Burns can
occur from touching
hot metal parts, hot
water or steam. Use
caution when you turn
a steam iron upside
down, there may be
hot water in the water
tank.

• WARNING: To protect
against the risk of
electric shock do not
put the appliance in
water or in any other
liquid.

• Do not use the vertical
steam feature on clothes
that are being worn.

• Do not leave the iron

unattended whilst plugged
in or on an ironing board.
Never allow the mains lead
to over hang the work
surface.

• The socket should always
be off before plugging or
unplugging from the
socket. Never yank the
cord to disconnect from
the socket, instead, grasp
plug and pull to
disconnect.

• Do not allow the cord to
touch hot surfaces. Let the
iron cool completely before
putting away. Loop cord
loosely around the iron
before storing.

Other safety
considerations

• Use the iron only for its
intended use.

• Always disconnect the iron
from the electrical socket
when filling with water or
emptying, and when not in
use.

• When placing the iron on
its heel, ensure that the
surface on which the heel
is placed is stable.

• Do not operate the iron
with a damaged cord or if
the iron has been dropped
or damaged. To avoid the
risk of electric shock, do
not disassemble the iron,
but telephone Morphy
Richards for advice.
Incorrect reassembly can
cause a risk of electric
shock when the iron is
used.

Special
instructions

• If your iron does not work,
check the following points:

Has the temperature
control been set to the
required temperature? Is
the plug in its socket? Is
the plug itself or the socket
faulty? (Check by plugging

in another appliance).

• WARNING: When not in

use, your iron should
never be placed flat
and left on an ironing
board.

• To prevent damage to the
textile being ironed, follow
the temperature guide
carefully. (Test the inside of
the hem of the garment).

• When ironing is complete,
remove the plug from the
socket, empty any
remaining water from the
tank, and allow to cool
before storage.

• If you drop or severely
knock your iron this could
cause internal damage
even if the outside appears
alright. Have it checked by
a qualified electrician.

• It is recommended that you
use up one beaker of water
by operating your iron’s
steam and shot of steam
functions before ironing any
clothes as some dripping
may occur while your irons
steam system is activated.

UUKK HHeellpplliinnee 00887700 006600 22661155 RReeppllaacceemmeenntt PPaarrttss 00887700 116677 66664466 IIrreellaanndd HHeellpplliinnee 11880000 440099111199

Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.

ELECTRICAL
REQUIREMENTS

Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating Current).

If the socket outlets in your
home are not suitable for the
plug supplied with this appliance
the plug should be removed and
the appropriate one fitted.

WARNING : The plug
removed from the mains
lead, if severed, must be
destroyed as a plug with a
bared flexible cord is
hazardous if engaged into
a live socket outlet.

Should the fuse in the 13 amp
plug require changing, a 13 amp
BS1362 fuse must be fitted.

WARNING: This appliance
must be earthed.

Symbol

(120°C Max) Cool

(160°C Max) Warm

(210°C Max) Hot

Control knob
positions

Do not iron
at all

Fabric

Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester

Wool, Polyester
mixtures e.g.
Polyester/Cotton

Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen

Ironing

Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)

Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.

With water in tank

Dry and spray

Steam/spray/shot of steam

Without water in tank

Dry ironing

INSTRUCTIONS FOR USE

33

Temperature guide

Jet clean