Morphy Richards Reflect glass kettle User Manual

Reflect glass kettle
Please read and keep these instructions
www.morphyrichards.co.uk
getting the best from your new kettle...
Important:
When filling from a tap, care must be taken to avoid striking the glass body on the tap.
• Empty the water out of the kettle after first boiling
To clean away any deposits that are left in the kettle after the manufacturing process
Descale as appropriate for the hardness of the water in your area
It is important to descale as the performance of the kettle and auto
switch-off will be impaired
Safety first
Always pour water slowly and carefully to prevent the splashing of
scalding water.
Fast boil kettles perform differently
If your kettle is a fast boil model, it may sound louder during boiling
and switch off suddenly with no after noise - this is normal.
Important safety instructions
The use of any electrical appliance requires the following common sense safety rules.
Primarily there is danger of injury or death and secondly the danger of damage to the appliance. These are indicated in the text by the following two conventions:
WARNING: Danger to the person!
IMPORTANT: Damage to the appliance! In addition we offer the following safety advice.
Location
Always locate your kettle away from the
edge of the worktop.
Ensure that the kettle is used on a firm,
flat surface.
Do not use the kettle outdoors or in a
bathroom.
WARNING: Do not place the kettle onto
a metal tray or metal surface whilst in
use.
Children
Children do not understand the dangers
associated with operating electrical
appliances. Never allow children to use
this appliance.
Teach children to be aware of dangers in
the kitchen, warn them of the dangers of
reaching up to areas where they cannot
see properly or should not be reaching.
Mains lead
The mains lead should reach from the
socket to the base unit without straining
the connections. Reduce the length of
the lead by storing the excess in the
cord storage facility in the base unit.
Do not let the mains lead hang over the
edge of the worktop where a child could
reach it.
Do not let the lead run across an open
space e.g. between a low socket and
table.
Do not let the lead run across a cooker or toaster or other hot area which might damage the cable.
Do not place the kettle where the mains lead could fall into a sink.
Your safety
Always pour hot water slowly and carefully without tipping the kettle too fast to prevent splashing and spillage.
Extreme caution must be used when moving a kettle containing hot water.
Do not touch hot surfaces. Use handles or knobs.
Always close the lid securely, otherwise the kettle may not switch off automatically and may spit out boiling water.
Avoid contact with steam from the spout when the water is boiling or just after it has switched off.
Take care if opening the lid for re-filling when the kettle is hot.
Do not fill above the MAX mark, otherwise boiling water may be ejected.
Do not hold the switch in the on position or tamper with the switch to fix it in the on position as this may cause damage to the switch-off mechanism.
Unplug from the outlet before cleaning.
Allow to cool before putting on or taking
off parts and before cleaning.
Treating scalds
Run cold water over the affected area immediately. Do not stop to remove clothing, get medical help quickly.
Other safety considerations
To protect against fire, electric shock and personal injury do not immerse cord, plug or kettle in water or any other liquid.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Ring the helpline number for advice on examination and repair.
2
Loading...
+ 4 hidden pages