Morphy richards MATTINO ESPRESSO MACHINE user Manual

Getting the best from your new coffee maker...

Safety first

Caution must be used when handling hot water, coffee or steam.

Run water through your machine before first use

It is important to run water through your coffee maker in order to rinse the machine. You can also run water through to warm your coffee machine.

Descale as appropriate for the hardness of the water in your area

It is important to descale as the performance of your coffee maker may be impaired by limescale and other impurities in the water supply.

Warning: Hot water and steam

Mattino Espresso Machine

Please read and keep these instructions

CM47020 MUK Rev 4

If you have a problem or complaint, please call our dedicated UK based helpline before returning your product to the retailer from where it was purchased.

UK Helpline: 0844 871 0960 Replacement Parts: 0844 873 0726 Ireland Helpline: 1800 409 119

Upon registration with Morphy Richards

(UK & ROI only)

Register online for your 2 year guarantee. See back of this instruction book for details. (UK and Ireland customers only)

www.morphyrichards.co.uk

47020 rev4_x 28/09/2010 11:41 Page 1

UK Helpline 0844 871 0960 Replacement Parts 0844 873 0726 Ireland Helpline 1800 409 119

Features

⁄ Detachable Water Tank

¤ Cup Warming Plate

‹ LCD Screen

› Brewing Head & Percolation Grid (inside)

ﬁ Coffee Tamper

ﬂ Filter Holder

‡ Drip Tray Gr id

· Drip Tray

‚ Empty Drip Tray Indicator

„ Steam Nozzle / Cappuccino Accessory

‰ Brewing Dispenser

Â Steam / Hot Water Control

Ê Measuring Spoon

⁄

‹

›

ﬁ

ﬂ

‡

‚

„

‰

ﬂ

47020 rev4_x 28/09/2010 11:41 Page 2

For details of other Morphy Richards products, please see our website:

Control Panel

ËÈÍ

ÌÓ Ô

ÛÙ

ˆ˜

◊

Á Water Hardness Indicator

Ë Coffee Cup Icons

È Standby Mode Indicator

Í Coffee Quantity Indicator

Î Steam Icon

Ï Hot Water Icon

Ì Standby Icon

Ó E.S.E Pod Coffee Mode

Ô Ground Coffee Mode

 Low Water Level Indicator Icon

Ò Temperature Level Indicator Icon

Ú De-scaling Icon

Û Standby button

Ù Cup Selection / Coffee Pods / Ground Coffee Selection

ı Quantity Selection Button / Water Hardness Selection

ˆ Temperature Selection Button

˜ Steam / Hot Water Button

¯ Brew Button

˘ Brewing Icon

◊ Brewed Icon

47020 rev4_x 28/09/2010 11:41 Page 3

UK Helpline 0844 871 0960 Replacement Parts 0844 873 0726 Ireland Helpline 1800 409 119

Please also refer to the main instruction booklet, which contains important safety information and more detail on how to use the Mattino.

Easy set-up guide

Open the water tank lid ⁄ and fill with cold water, the tank can be filled in situ or removed from the machine by lifting upwards. (See page 6 for ‘How to fill the water tank.)

After filling with water, switch the machine on by pressing the Standby button Û.

Select the E.S.E Pod or Ground Coffee Mode by pressing the Coffee Cup Selection button Ù for 2 seconds, a beep sound will be heard each time the selection changes.

For more information on ground coffee and E.S.E. pods see page 8.

Coee Pod

Ground Coee

Put the ground coffee into the Filter Holder

ﬂ using the supplied measuring spoon, or

place an E.S.E coffee pod into the Filter Holder. A 1 cup and 2 cup level is marked on the Filter Holder to suggest how much ground coffee should be used.

For more detailed overview of the control panel see page 3

Ë Coffee Cup Icons Í Coffee Quantity Indicator Ó E.S.E. Pod Coffee Mode Ô Ground Coffee Mode Ò Temperature Level Indicator Icon Û

Standby button

Ù Cup Selection / Ground Coffee / Pod Selection ı Quantity Selection Button / Water Hardness Selection ˆ Temperature Selection Button ¯ Brew Button ˘ Brewing Icon ◊ Brewed Icon

ËÍ

ÓÔ

◊

NOTE: The Mattino Espresso Machine must be rinsed before first use. See page 6 for more information.

47020 rev4_x 28/09/2010 11:41 Page 4

For details of other Morphy Richards products, please see our website:

Select the desired espresso coffee quantity by pressing the Coffee Quantity selection button ı. (See page 7 for more information.)

Note: the selected quantity is per cup, not the total amount.

Attach the Filter Holder ﬂ to the Brewing Head › by placing the ears of the Filter Holder into the two notches in the Brewing Head and turning the handle firmly from the left to the right.

Place coffee cup(s) under the Brewing Dispenser ‰ on the Drip Tray Grid ‡.

Select the single or double cup selection by pressing the Coffee Cup Selection button

Ù, a beep sound will be heard for each

pressing. The Coffee Cup icons Ë will display the selection for either 1 or 2 cups.

Select your coffee brewing temperature by pressing the Temperature Selection Button

ˆ. (See page 7 for more information)

Low

Hot

Hotter

Press the Brew Button ¯, a beep will be heard. The espresso will come out from the Brewing Dispenser and the Brewing Icon ˘ will display on the LCD screen.

The Machine will stop automatically, and two beeps will sound when the espresso has finished dispensing and the Brewed Icon ◊ will be displayed on the LCD screen.

47020 rev4_x 28/09/2010 11:41 Page 5

+ 11 hidden pages