Morphy Richards IB22041, I CREATE 22041 Installation Manual

THERMOCERAMIC MULTISTYLER

INSTRUCTIONS &

GUARANTEE

Model 22041

STYLING TIPS:

F

or information on how to create this look and

man

y others, as well as details of the rest of the

Morph

y Richards/I Create product range please visit

our website:

www

.morphyrichards.co.uk

HELPLINE:

(8.30-5.00 Mon-Thurs/8.30-4.00 Fri)
UK 0870 060 2614
Republic of Ireland 1800 409119

Morph

y Richards’s products are intended for

household use only

. Morphy Richards has a policy

of continuous impro

vement in product quality and

design.

The company therefore reserves the right to

c

hange the specification of its models at any time.

Registered address: Morphy Richards Ltd,
Mexborough, South Yorkshire, S64 8AJ

www.morphyrichards.co.uk

PC22041M UK rev 1 5/4

2-YEAR GUARANTEE:

It is in your interest to retain the retailers receipt as
proof of purchase. Please quote the model number if
the product develops a fault. This number can be
found on the handle of the product.

All Morph

y Ric

hards products are indi

vidually tested

before lea

ving the factory

. In the unlikely event of

an

y appliance pro

ving to be faulty within 28 days of

pur

c

hase it should be returned to the place of

pur

c

hase for it to be replaced.

If a fault develops after 28 days and within 24
months of original purchase, you should contact the
helpline number quoting the model number of the
product, or write to the address below. You will be
asked to return the product (in secure packaging) to
the address belo

w along with a cop

y of proof of

pur

c

hase:

T

he

After Sales Division,

Morph

y Ric

hards Ltd
Mexborough
South

Y

orkshire
England
S64 8AJ

HOW DOES THERMO-:
CERAMIC TECHNOLOGY:
WORK?:

The multi styler contains a special thermoceramic
heating element which ensures it heats up to the
temperature you select within seconds. This heat is
then maintained throughout use, to guarantee your
style lasts all day.

The ceramic coating ensures that the hair cuticle lies
flat once styled. This ensures that your hair reflects
light and therefore appears healthy and shiny. The
ceramic coating also acts as a barrier to protect your
hair from the high temperature reached by the
multistyler. This minimises damage to the cuticle.

The multistyler is digitally controlled so that you can
select the heat setting that is best for your hair type
without causing unnecessary damage. Rate the
thickness of your hair on a scale of 1 to 10, 1 being
the thinnest. Use the corresponding setting for best
results.

DAMAGED CUTICLE
REDUCES LIGHT

AND

SHINE POTENTIAL

CERAMIC COATING
ENSURES ‘FL

Y AWAY’

SECTIONS LIE FLAT SETTING 1 SETTING 10

8937 I Create multiS 22041 ib 20/5/04 10:14 am Page 1

SAFETY INFORMATION:

When using y

our hair appliance, basic safety
precautions should always be followed. Please read
these instructions carefully before using the product,
and keep them in a safe place for future reference.

nn

1 T

his multistyler is professional standard, and

reac

hes very high temperatures.

Alw

ays be careful

not to allo

w the barrel to come into contact with

the skin,

and use the heat protection stands to avoid

causing damage to surfaces.

nn

2 Do not lea

ve the barrels or plates in contact with

the hair for more than a few seconds.

The multi

styler reac

hes very high temperatures, so there is no

need to lea

ve the hair around the barrel or inside
the plates for longer than a few seconds. This will
avoid unnecessary damage to the hair cuticle.

nn

3 Use the appliance for its intended use only.

nn

4 T

o protect against the risk of electric shock, do not

immerse the appliance in w

ater or any other

liquids.

nn

5 It is recommended that this appliance should not be

used by children.

nn

6 Alw

ays unplug your appliance when it is not in use.

nn

7 Do not lea

ve the multistyler switched on while

unattended.

nn

8

Do not take this product into a bathroom, or use
near w

ater.

nn

9 In the event of cable damage, do not attempt to

replace the mains cable – return to Morphy
Ric

hards.

nn

10After use, do not store until the product has cooled

do

wn.

nn

11Do not place the multistyler on surfaces likely to be

damaged by the heat. Always use the safety stands.

WIRING:

T

his product is fitted with a 13A (BS1363) plug. A 13
amp fuse (BS1362) must be used. Check the voltage on
the rating plate of your appliance corresponds with your
house electricity supply w

hich must be AC (Alternating

current). If the soc

ket outlets in your home are not
suitable for the plug supplied with this appliance the
plug should be remo

ved and an appropriate one fitted.

IMPOR

TANT: THE PLUG REMOVED FROM THE MAINS
LEAD, IF SEVERED MUST BE DESTROYED AS A PLUG
WITH BARED FLEXIBLE CORD IS HAZARDOUS IF
ENGA

GED INTO A LIVE SOCKET OUTLET.

MAINS LEAD:

As a safety precaution and to prolong the life of your
appliance, do not wrap the mains lead around the
appliance as this will cause damage.

HOW TO USE YOUR:
MULTISTYLER:

nn

1 Insert the chosen attachment into the handle of the

multistyler. Ensure the attachment is locked into
place by twisting the collar.

nn

2 Plug the multistyler in at the mains.

nn

3 Press and hold the on/off s

witc

h until the blue
screen illuminates. ‘Set’ will appear in the top left
hand corner of the screen and a ‘sun’ symbol will
begin to flash.

nn

4 Y

our multistyler will automatically s

witch on at

temper

ature setting 5.

nn

5 Select the correct heat setting for y

our hair type.

Yo u

can do this b

y using the

UP

DO

WN

arro

ws on the

handle.

T

he setting you select will be highlighted on

the digital display e.g setting 1 and setting 10.

nn

6 The thicker/coarser your hair type, the higher setting

you will require. It will not be necessary to use the
highest setting for most hair types.

nn

7 Whilst heating, ensure the multistyler is not left on

an

y surfaces w

hich could be damaged by the heat.

Use the heat protection stand w

hen using tongs.

nn

8 T

he buzzer will sound and the sun symbol will stop

flashing w

hen the multistyler has reac

hed the

desired temper

ature.

You are now ready to style!

CLEANING:

It is normal to find build up of hair products on the
barrels and plates of your multistyler. In order to avoid
this you should clean your multi styler regularly. Always
wait for the plates/barrels to cool down thoroughly
before cleaning. Use a damp cloth to remove any build
up. If this fails to clean the plates, try a non abrasive
cleaning wipe e.g. CIF

.

T

ONG

LEVER

COOL TOUCH

FINGER GRIP

HEAT

PROTECTION

STAND

DROP

TONG

B

ARREL

ATTACHMENT

WIDE BARREL TONG

A

TTACHMENT

SLIM B

ARREL TONG

ATTACHMENT

STRAIGHTENER

ATT

ACHMENT

ON/OFF
SWITCH

ADJUST

ABLE HEAT

SETTINGS

DIGIT

AL

DISPLAY

ATTACHMENT

RELEASE
COLLAR

MULTISTYLER:
ATTACHMENTS:

Y

our multi styler comes with 5 attachments so you can

create an

y look you want. For sleek, straight hair, use

the

STRAIGHTENER attac

hment. If you want curls or waves

use one of the 3 tong barrels.

The

WIDE

BARREL

will help

you to create soft waves, whilst the

SLIM BARREL will

create tighter more defined curls. The

DROP TONG is

designed to give a more natural looking curl – tighter at
the roots, and looser towards the tip. The

BRUSH

attachment slides over the narrow barrel and can be
used to revive your style and create volume.

TO CHANGE:

ATTACHMENTS:

nn

1 Before c

hanging the attachments, always ensure the

multistyler is s

witched off at the mains and at the

handle before y

ou changing the attachments.

nn

2 Chec

k that the attachment you are removing has

cooled down.

nn

3 Hold the attachment firmly and twist the attachment

release collar to unlock the attachment. Pull the
attachment gently from the handle.

nn

4 Insert the attachment you wish to use into the

handle and twist the collar to lock in place.

SELECTING THE:
CORRECT HEAT:
SETTING:

T

he Thermo Ceramic multi styler is designed to reach

extremely high temper

atures for use on all hair types.
Most hair types can be styled perfectly without using the
highest temperature settings. Where possible you should
always try to use lower settings as this is safer and
kinder to your hair.
As a guide to which heat setting is best for your hair,
you should rate your hair on a scale of 1-10 (10 being
thickest, 1 thinnest). This rating will correspond to the
optimum heat setting for your hair.

PARTS &:
ATTACHMENTS:

BRUSH SLEEVE

ATTACHMENT

8937 I Create multiS 22041 ib 20/5/04 10:14 am Page 2