Morphy Richards IB21024, I CREATE 21024 Installation Manual

HOW DOES:

THERMOCERAMIC:

TECHNOLOGY:

WORK?:

THERMOCERAMIC HAIRDRYER

INSTRUCTIONS &

GUARANTEE

Model 21024

STYLING TIPS:

For information on how to create this look and
many others, as well as details of the rest of the
Morphy Richards/I Create product range please visit
our website:

www.morphyrichards.co.uk

HELPLINE:

(8.30-5.00 Mon-Thurs/8.30-4.00 Fri)
UK 0870 060 2614
Republic of Ireland 1800 409119

Morphy Richards’s products are intended for
household use only. Morphy Richards has a policy
of continuous improvement in product quality and
design. The company therefore reserves the right to
change the specification of its models at any time.

Registered address: Morphy Richards Ltd,
Mexborough, South Yorkshire, S64 8AJ

www.morphyrichards.co.uk

PC21024M UK rev 1 4/4

HEATING

ELEMENT

THERMO

CERAMIC PLATE

The ThermoCeramic hairdryer creates far infra-

red heat (ie at the far end of the infra-red

spectrum) which is generated as the airflow

passes around the ceramic plate.

Infra-red heats objects

directly rather than

heating the air around

the object - therefore it

heats the hair from the

inside out.

This is more efficient using less airflow and heat

to achieve the same effect, and more healthy for

your hair as it isn’t exposed to high temperatures

for long periods of time.

HAIR DRIES FROM

THE INSIDE OUT

DAMAGED CUTICLES

REDUCE LIGHT

REFLECTIVITY AND

THEREFORE SHINE

UNDAMAGED

CUTICLES LIE FLAT

MAKING HAIR SHINY

SAFETY INFORMATION:

When using your hairdryer, basic safety precautions
should always be followed. Please read these
instructions carefully before using the product, and keep
them in a safe place for future reference.

nn

1 Use this appliance for its intended use only.

nn

2 To protect against the risk of electric shock, do

not immerse the appliance in water or in any
other liquids.

nn

3 Check the voltage on the rating plate of the

hairdryer corresponds with your house
electricity supply which must be AC (alternating
current).

nn

4 Always unplug the appliance when it is not in

use.

nn

5 Do not leave the hairdryer switched on whilst

unattended.

nn

6 Do not take this product into a bathroom or use

near water.

nn

7 In the event of cable damage, do not attempt to

replace the mains cable – return to Morphy
Richards.

nn

8 It is recommended that the product should not

be used by children.

nn

9 Do not place on surfaces that are likely to be

damaged by heat.

nn

10 Ensure the filter is cleaned regularly.

WIRING:`

This product is fitted with a 13A (BS1363) plug. A 13
amp fuse (BS1362) must be used. Check the voltage on
the rating plate of your appliance corresponds with your
house electricity supply w

hich must be AC (Alternating

current). If the soc

ket outlets in your home are not
suitable for the plug supplied with this appliance the
plug should be remo

ved and an appropriate one fitted.
IMPORTANT: THE PLUG REMOVED FROM THE MAINS
LEAD

, IF SEVERED MUST BE DESTROYED AS A PLUG
WITH BARED FLEXIBLE CORD IS HAZARDOUS IF
ENGA

GED INTO A LIVE SOCKET OUTLET.

MAINS LEAD:

As a safety precaution and to prolong the life of your
appliance, do not wrap the mains lead around the
appliance as this will cause damage.

HOW TO USE YOUR:
HAIRDRYER:

nn

1 Having shampooed your hair, ensure that it is

rinsed thoroughly as shampoo that is left in the
hair will leave it looking dull.

nn

2 Comb your hair through with a wide tooth comb

to remove tangles before styling.

nn

3 Ensure the concentrator nozzle is detached.

nn

4 Slide the on/off switch to position I switch the

hairdryer on.

nn

5 Use the unique heat/speed dial to change the

dryer to a faster, hotter setting to remove excess
water from your hair.

nn

6 As your hair begins to dry, switch off the hair

dryer and clip on the concentrator nozzle to

begin styling your hair. If you are blow drying
curly hair into a straight style, use the
concentrator to direct air down into the shaft of
the hair.

nn

7 As you begin to style your hair during drying,

use the heat/speed dial to select a slower/cooler
setting.

nn

8 When your hair is dry, and you have achieved

the desired style, press and hold the cool shot
button. This will release a burst of cold air which
will set your style in place.

nn

9 Always remember to switch the on/off button to

the 0 position, to turn tour hairdryer off.

AIR FILTER

CONCENTRATOR

NOZZLE

COOL SHOT

ON/OFF
SWITCH

HEAT/SPEED DIAL

HANGING LOOP

THERMOCERAMIC

PLATE

CLEANING THE FILTER

Cleaning the air filter regularly will ensure that only
clean air is used to dry your hair and that the dryer
will not overheat and cut out. To remove the air
filter, ensure the hair dryer is unplugged from the
mains supply and hold the body of the dryer firmly
while twisting the cover to release the filter. Take out
the filter to clean away hair and lint using a vacuum
cleaner. Ensure the filter is completely dry before
refitting. To re-fit, locate the air filter into the filter
cover and click the cover back into place.

2-YEAR GUARANTEE:

It is in your interest to retain the retailers receipt as
proof of purchase. Please quote the model number if
the product develops a fault. This number can be
found on the handle of the product.

All Morphy Richards products are individually tested
before leaving the factory. In the unlikely event of
any appliance proving to be faulty within 28 days of
purchase it should be returned to the place of
purchase for it to be replaced.

If a fault develops after 28 days and within 24
months of original purchase, you should contact the
helpline number quoting the model number of the
product, or write to the address below. You will be
asked to return the product (in secure packaging) to
the address below along with a copy of proof of
purchase:

The After Sales Division
Morphy Richards Ltd.
Mexboroug,
South Yorkshire
England, S64 8AJ