Fleece Heated Mattress Cover
Please read and keep these instructions
getting the best from your
new heated bedding...
Safety
• For your safety, the in-built system in this product will
automatically shut off the power if it reaches a
temperature that is higher than considered comfortable.
It will also shut off automatically if any unsafe situation
should arise.
Washing instructions
• Before washing, detach the switch control and lead
from the blanket.
UK
Helpline: 0870060 2614
Ireland 1800 409089
www.morphyrichards.com
For replacement parts, help with using your Morphy Richards
products and lots more, contact us by phone or through our website
3 Heat
setting
75245 rev1 17/3/06 10:59 AM Page 1
2
Important safety
instructions
The use of any electrical appliance
requires the following of basic common
sense safety rules.
Primarily there is danger of injury or death
and secondly the danger of damage to the
appliance. These are indicated in the text by
the following two conventions:
WARNING: Danger to the person!
IMPORTANT: Damage to the appliance!
In addition we offer the following
essential safety advice.
Care instructions
• Examine frequently for any signs of wear
or damage to the blanket, switch or cord.
In case of damage or misuse, cease using
and contact The After Sales service
helpline (See page 6)
• During the summer, the blanket can be
used to air the mattress. To store, roll in a
towel and store in a dry place.
•Avoid folding or creasing the blanket once
unpacked.
• Do not dry clean the blanket, follow
washing instructions on the label attached
to the blanket and the details that relate
to your blanket.
Personal safety
• Do not use with a helpless person, an
infant or a person insensitive to heat.
•Young children should be instructed on
how to operate the controls safely and
heat settings should be controlled by a
parent or guardian.
• Do not use a hot water bottle at the same
time as using the blanket.
Product safety
• Ensure the blanket is used in the manner
in which it is intended, either as an
overblanket or underblanket as
appropriate.
• If used on an adjustable bed, check the
blanket or cord cannot become trapped
or rucked.
• Ensure the product is correctly fitted to
the bed, following the instructions in this
booklet.
• Do not insert pins or any sharp objects
into the blanket.
• Do not tuck the heated part of material
under the mattress.
• Do not use if the blanket is wet.
•Avoid pressing creases or folds into the
blanket. Do not switch on if the blanket is
folded, creased or rucked.
• Do not use any lead, switch or cord other
than the one supplied with this blanket.
• Do not coil or lay the lead on the blanket.
• Not intended for medical use in hospitals.
All Morphy Richards heated blankets have been manufactured to the highest European
standards. This product has been comprehensively tested for all known safety situations, so
you can relax in the knowledge that it will provide warmth, comfort and peace of mind.
IMPORTANT INSTRUCTIONS
PLEASE READ CAREFULLY
AND RETAIN FOR
FUTURE USE
75245 rev1 17/3/06 10:59 AM Page 2
3
Electrical requirements
Check that the voltage on the rating
label of your appliance corresponds with
your house electricity supply which must be
A.C. (Alternating Current).
If the socket outlets in your home are not
suitable for the plug supplied with this
appliance, the plug should be removed and
the appropriate one fitted.
WARNING: The plug removed from
the mains lead, if severed, must be
destroyed as a plug with bared flexible
cord is hazardous if engaged into a live
socket outlet.
Should the fuse in the 13 amp plug
require changing, a 3 amp BS1362 fuse
must be fitted.
This appliance does not need to be
earthed. It is a double insulated product.
Before use
Before using this appliance ensure that
the voltage indicated on the product
corresponds with the mains voltage in your
home. If you are in any doubt about your
supply, ask your electrical dealer or local
electricity company.
WARNING: Do not attempt to use
the blanket with controls other than
those supplied with the unit.
It is quite normal for the switch to
become warm as the components encased
are part of the protection circuit.
Dual control models
Each side of the blanket has a
completely separate element and each is
supplied with its own independent mains
lead. A 13amp plug on each lead is
essential.
Do not connect both flexible cords to
one 13amp plug.
The two leads should preferably be
plugged into individual sockets. However, if
only one socket is accessible, then a dual
adaptor should be used.
WARNING: Only the electric blanket
should be connected to the dual
adaptor. If you are unsure, please
contact a qualified engineer.
It is quite normal for the switch to
become warm as the components encased
are part of the protection circuit.
75245 rev1 17/3/06 10:59 AM Page 3
Mattress covers with
elasticated skirt.
• Place the mattress cover directly on the
mattress with the control switch at the
head of the bed. A
• Fit the shaped corners to the mattress
and turn the elasticated edges of the
skirt under the mattress.
• Ensure all creases are smoothed out and
the skirt fits tightly round sides of the
mattress.
4
A
75245 rev1 17/3/06 10:59 AM Page 4
5
How to use
1 Ensure the blanket is fitted to the bed
correctly, see diagram A, page 4
2 Plug the power lead into the closest
socket, using an extension lead if
needed to ensure that the lead is not
stretched.
Preheating the bed
1 Move the heat setting on the control
switch to heat level 2 or 3, depending on
the level of the heat required. Allow
approximately 60-90 minutes for the
blanket to heat the bed thoroughly,
although this time may vary depending
on the room temperature and type of
bedding used.
All night use
1 Move the heat setting on the control
switch to heat level 1.
• This setting will provide safe and
comfortable heat to sleep on all night.
• This setting can be used to air the bed.
WARNING: Always ensure that the
heat setting is moved to the OFF
position when you get up the next day,
or after airing the bed.
Washing instructions
• Do NOT dry clean -
• Do NOT iron -
WARNING:Before washing ensure that
you detach all the controls from the blanket.
• Only use a washing machine with a drum
large enough to take the blanket without
forcing it in.
1 Measure the blanket so it can be
stretched back to its original size whilst
wet.
Machine washing
1 Unplug the blanket from the power
socket.
2 Disconnect the control switch and cord
from the blanket by lifting the locking B
lever over the raised button and pull
apart.
3 Wash on the wool setting at 40°C.
4 Gently stretch the blanket back to it’s
original shape and size before drying
WITHOUT using clothes pegs on the
wired area of the blanket. (See
instrucions for tumble drying)
Tumble drying
1 Unplug the blanket from the power
socket.
2 Disconnect the control switch and cord
from the blanket by lifting the locking B
lever over the raised button and pull
apart.
3 Tumble dry on the LOW heat setting,
following the drying instructions under
‘machine washing’ section, point 4.
Hand washing
1 Unplug the blanket from the power
socket.
2 Disconnect the control switch and cord
from the blanket by lifting the locking
lever over the raised button and pull
apart.
3 Use a mild washing liquid or detergent
and lukewarm water.
B
75245 rev1 17/3/06 10:59 AM Page 5
6
4 Immerse the blanket in the water and
allow to soak for 5-10 minutes.
5 Squeeze the soapy water through the
fabric.
6 Rinse the blanket thoroughly in cool
water, gently squeezing the fabric.
WARNING: Do not wring dry.
After sales service
If the blanket fails to operate, check the
following:
1 Check that the supply plug is correctly
connected to the flex.
2 Check the supply fuse and the 3 amp
plug fuse if applicable.
Helpline
Should you need any advice on using
the product, please contact our helpline.
8:30 - 5:00 Mon - Thurs
8:30 - 4:00 Fri
Tel: 0870 060 2614
Alternatively please write to
Morphy Richards Ltd, Customer Care
Ta lbot Road, Mexborough
South Yorkshire England S64 8AJ
Or email to:
customercare@morphyrichards. co.uk
WEEE
For electrical products sold within
the European Community.
At the end of the electrical products useful
life it should not be disposed of with
household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer
for recycling advice in your country.
75245 rev1 17/3/06 10:59 AM Page 6
0870 060 2614
1800 409089
EB75245M UK Rev 1 03/06
The After Sales Division
Morphy Richards Ltd, Mexborough
South Yorkshire, England, S64 8AJ
Helpline (office hours)
UK 0870 060 2614
Republic of Ireland 1800 409089
Morphy Richards products are intended for
household use only
Morphy Ricahards has a policy of
continuous improvement in product quality
and design. The Company, therefore,
reserves the right to change the
specification of its models at any time.
Your three year
guarantee
It is important to retain the retailers
receipt as proof of purchase. Staple your
receipt to this back cover for future
reference.
Please quote the following information if
the product develops a fault. These numbers
can be found on the rating label attached to
the blanket.
Model no. Serial no.
All Morphy Richards products are
individually tested before leaving the factory.
In the unlikely event of any appliance proving
to be faulty within 28 days of purchase it
should be returned to the place of purchase
for it to be replaced.
If the fault develops after 28 days and
within 36 months of original purchase, you
should contact the Helpline number quoting
Model number and Serial number on the
product, or write to Morphy Richards at the
address shown.
You may be asked to return a copy of
your proof of purchase.
Subject to the exclusions set out below
(see Exclusions) the faulty appliance will then
be replaced and dispatched usually within 28
working days of receipt.
If for any reason this item is replaced
during the 3 year guarantee period, the
guarantee on the new item will be calculated
from original purchase date. Therefore it is
vital to retain your original till receipt or
invoice to indicate the date of initial
purchase.
To qualify for the 3 year guarantee the
appliance must have been used according to
the manufacturers instructions.
EXCLUSIONS
Morphy Richards shall not be liable to
replace the goods under the terms of the
guarantee where:
1 The fault has been caused or is
attributable to accidental use, misuse,
negligent use or used contrary to the
manufacturers recommendations or where
the fault has been caused by power
surges or damage caused in transit.
2 The appliance has been used on a voltage
supply other than that stamped on the
products.
3 Where the appliance has been used for
hire purposes or non domestic use.
4 Morphy Richards are not liable to carry
out any type of servicing work, under the
guarantee.
This guarantee does not confer any rights
other than those expressly set out above and
does not cover any claims for consequential
loss or damage. This guarantee is offered as
an additional benefit and does not affect your
statutory rights as a consumer.
• This guarantee is valid in the UK and
Ireland only.
75245 rev1 17/3/06 10:59 AM Page 7
Loading...