Morphy Richards IB4060X User Manual

Comfi-grip iron

steam/spray/shot

Please read and keep these instructions

www.morphyrichards.co.uk

getting the best from your
new iron...

• Safety first

Caution must be used when handling this appliance as it does get
very hot. Always switch off the unit and allow to cool before
cleaning or storing.

• Jet cleaning

Your iron will give the best ironing results and will last longer if you
apply jet cleaning after each period of ironing.

Important safety
instructions

The use of any electrical appliance
requires the following common sense safety
rules.

Primarily there is danger of injury or
death and secondly the danger of damage
to the appliance. These are indicated in the
text by the following two conventions:

WARNING: Danger to the person!

IMPORTANT: Damage to the appliance! In
addition we offer the following safety advice.

Location

• Do not use outdoors.

Children

• Children do not understand the dangers

associated with operating electrical

appliances. Never allow children to use

this appliance.

• Close supervision is necessary when any

appliance is used near children.

Personal safety

• Burns can occur from touching hot metal

parts, hot water or steam. Use caution

when you turn a steam iron upside

down, there may be hot water in the

water tank.

• Do not use the vertical steam feature on

clothes that are being worn.

• Do not leave the iron unattended whilst

plugged in or on an ironing board. Never

allow the mains lead to over hang the

work surface.

• The socket should always be off before

plugging or unplugging from the socket.

Never yank the cord to disconnect from

the socket, instead, grasp plug and pull

to disconnect.

• Do not allow the cord to touch hot

surfaces. Let the iron cool completely

before putting away. Loop cord loosely

around the iron before storing.

Other safety considerations

• Use the iron only for its intended use.

• To protect against the risk of electric

shock do not put the appliance in water
or in any other liquid.

• Always disconnect the iron from the
electrical socket when filling with water
or emptying, and when not in use.

• Do not operate the iron with a damaged
cord or if the iron has been dropped or
damaged. To avoid the risk of electric
shock, do not disassemble the iron, but
telephone Morphy Richards for advice.
Incorrect reassembly can cause a risk of
electric shock when the iron is used.

Anti-scale models only

• Keep the anti-scale sachet out of reach
of children.

• Wipe up spilt anti-scale granules
immediately.

• If the granules come into accidental
contact with the eyes, flush them with
water for at least 15 minutes and remove
all particles. Consult a physician if
irritation persists.

• If the granules come into contact with
the skin, remove particles and wash with
water.

• Do not remove the anti-scale cartridge
from the iron, unless the tank is empty.

• When filling ensure that the iron is
disconnected from the electrical socket,
and that the cartridge is inserted
correctly.

Special instructions

• If your iron does not work, check the
following points:
Has the temperature control been set to
the required temperature? Is the plug in
its socket? Is the plug itself or the socket
faulty? (Check by plugging in another
appliance).

2

3

• Warning: when not in use, your iron
should never be placed flat and left on
an ironing board.

• To prevent damage to the textile being
ironed, follow the temperature guide
carefully. (Test the inside of the hem of the
garment).

• When ironing is complete, remove the
plug from the socket, empty any
remaining water from the tank, and allow
to cool before storage.

• If you drop or severely knock your iron
this could cause internal damage even if
the outside appears alright. Have it
checked by a qualified electrician.

• It is recommended that you use up one
beaker of water by operating your iron’s
steam and shot of steam functions before
ironing any clothes as some dripping may
occur while your irons steam system is
activated.

Electrical requirements

Check that the voltage on the rating plate
of your appliance corresponds with your
house electricity supply which must be A.C.
(Alternating current).

For appliances with fitted plug.

If the socket outlets in your home are not
suitable for the plug supplied with this
appliance the plug should be removed and
the appropriate one fitted.

IMPORTANT : THE PLUG REMOVED
FROM THE MAINS LEAD, IF SEVERED,
MUST BE DESTROYED AS A PLUG WITH A
BARED FLEXIBLE CORD IS HAZARDOUS IF
ENGAGED INTO A LIVE SOCKET OUTLET.

Should the fuse in the 13 amp plug
require changing a 13 amp BS1362 fuse
must be fitted.

WARNING: THIS APPLIANCE MUST BE
EARTHED.

Instructions for use

Temperature guide

Heat setting markings on the adjustable control dial of all Morphy Richards irons match
those of the International Textile Care Labelling Code.

Symbol

(120˚C Max) Cool

(160˚C Max) Warm

(210˚C Max) Hot

Control knob
positions

Do not iron
at all

Fabric

Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester

Wool, Polyester
mixtures e.g.
Polyester/Cotton

Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen

Ironing

Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)

Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.

With water in tank

Dry and spray

Steam/spray/shot of steam

Jet clean

Without water in tank

Dry ironing