ALARM TIME
SNOOZE FAST
FORWARD
SLOW
REVERSE
PM
AL 1 AL 2
AL1 AL2
OFF
Illustration
Location of controls
Dual alarm clock
28024 OPERA TING INSTRUCTIONS
Electrical requirements
Check the voltage on the rating plate of your digital clock
corresponds with your house electricity supply which must be A.C.
(alternating current).
For digital clocks with a fitted plug.
If the socket outlets in your home are not suitable for the plug supplied
with this appliance the plug should be removed and the appropriate
one fitted.
IMPORT ANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF
SEVERED, MUST BE DESTROYED AS A PLUG WITH A BARED
FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET
OUTLET .
Should the fuse in the 13 amp plug require changing a 3 amp BS1362
fuse must be fitted.
P.2
P.3 P.4
1 Alarm button
2 PM indicator
3 Alarm 1 indicator
4 Time button
5 Snooze button
6 Fast forward button
1
11
10
7
7 Alarm 2 indicator
8 Clock display
9 Slow reverse button
10 Speaker
11 Battery compartment
12 Alarm selector switch
Battery back-up facility (Unit will work without a battery being fitted)
Your alarm clock is equipped with a battery back-up facility.
1 Remove the battery compartment cover (located underneath the unit)
by pushing in the clip and lifting off.
2 Insert a battery size 9 volts PP3/6LR61 (Ensure battery is inserted
correctly)
3 Replace the battery compartment cover.
Should a power interruption occur the clock will continue to run,
however, time keeping will not be accurate. The display will be
extinguished to conserve battery life but the memory will retain details of
the clock time and alarm settings.
If the optional battery is not installed in case of the AC power failure the
display will blink to indicate the power was interrupted. You will need to
reset the clock and alarm.
Battery back-up is designed to operate for a short period
only.
If the unit is not to be used for a prolonged period, remove
the battery to avoid battery leakage.
In the interests of environmental safety : dispose of batteries
safely.
12
2
3 4 5 6
8
9
Maintenance
Do not expose your clock to extremes of temperature. The product
should be kept in a warm environment free from dust and damp. For
external cleaning use only a soft, clean, damp cloth. Use of detergents
may damage the finish.
Technical specification
AC Power supply : 230v 50Hz
Battery back-up : 9V DC type 6LR61/PP3
(not included)
Warning
WARNING: to reduce the risk of electric shock, do not expose this
appliance to rain or moisture.
Guarantee
Morphy Richards products are manufactured to internationally accepted quality
standards. In addition to your statutory rights, Morphy Richards guarantee your
product to be free from manufacturing and component defects for a period of TWO
YEARS from date of purchase.
If your product proves to be defective within 28 days of purchase, your Morphy
Richards dealer from whom the product was purchased will be pleased to replace it
free of charge.
Should your product develop a defect within the guarantee period but after the
replacement period, please return the product to the following address, together with
the proof of purchase, brief details of the symptoms and your own name and
address.
After Sales Division
Morphy Richards Limited
T albot Road
Mexborough
South Yorkshire
S64 8AJ
Your post office will provide a certificate of posting. The product will be repaired
and returned to you promptly.
If you need any further advice, please call our Helpline
(UK local rate) on: 08450 777700 (Mon-Fri)
446/8001/91 Rev 1
Morphy Richards Ltd, T albot Road, Mexborough, S64 8AJ
P.5 P.6
P.7
Cancelling the alarm
The alarm is programmed to run for 59 minutes.
1 Press the SNOOZE button to stop the alarm temporarily, the
alarm will repeat again in 7 minutes.
2 To cancel the alarm press the alarm set/off button. (The alarm
will automatically activate 24 hours later).
3 If the alarm is no longer required slide the alarm selector switch
to the OFF position. (The alarm indicator(s) will switch off).
Snooze function
You can press the SNOOZE button after the alarm has sounded which
allows 7 minutes of snooze time. After 7 minutes the alarm will sound
again.
1 When the alarm sounds press the SNOOZE button.
(The snooze default is set for 7 minutes and then resumes).
The snooze function will cease to operate after 59 minutes.
ATTENTION: To reduce the risk of electric shock, do not remove the cover.
There are no user serviceable parts inside the unit. Refer any servicing to
qualified personnel.
To prevent fire or shock hazard do not expose this apparatus to dripping or
splashing.
Switching on and setting the clock time
Before any alarm functions can be used on your alarm clock
you must first set the clock to the correct time.
1 Place the unit on a flat surface. Plug the mains plug into the wall
socket and switch on the wall socket.
2 The clock LED display will flash.
3 Press and hold the TIME SET button and simultaneously hold
down the FAST FORW ARD button or the SLOW REVERSE
button. The LED clock display will fast forward or reverse
the minutes and hour segments. Release all buttons when the
correct time is set.
4 The PM indicator will illuminate to indicate 12.00 midday has
been reached.
Setting the clock alarm time
Set alarm 1
1 Slide the alarm selector switch to the AL1 position. Alarm 1
indicator will light.
2 Press and hold the ALARM set/off button and simultaneously
hold down the FAST FOR WARD button or SLOW REVERSE
button. The clock display will fast forward or reverse the
minutes and hour segments. Release all buttons when the correct
alarm time is reached.
Set alarm 2
1 Slide the alarm selector switch to the AL2 position. Alarm 2
indicator will light.
2 Press and hold the ALARM set/off button and simultaneously
hold down the FAST FOR W ARD button or SLOW REVERSE
button. The clock display will fast forward or reverse the
minutes and hour segments. Release all buttons when the correct
alarm time is reached.
If set to AL1 or AL2 the alarm will operate at the preset alarm times.
Morphy Richards products are intended for household use only.
Morphy Richards has a policy of continuous improvement in product quality and design.
The company, therefore reserves the right to change the specification of its models at any time.
Morphy Richards Website: www.morphyrichards.co.uk
Loading...