Morphy Richards IB28010 User Manual

Illustration

Robot Escargot clock radio

28010 OPERATING INSTRUCTIONS

○ ○ ○ ○

Hour hand

Sleep on indicator

Alarm on indicator

Location of controls

1 Snooze button 2 Tuning control 3 Volume control 4 Sleep button 5 Clock display 6 Minute/Hour button 7 Time button

Alarm set indicator

○ ○ ○

Time set indicator

Sleep set indicator

Function switch

Alarm buzzer

R LA

Alarm radio

Radio off

RADIO

Radio on

8 Battery compartment 9 Alarm set button 10 Alarm off button 11 AM/FM band switch 12 Function selector switch 13 Adaptor socket (at rear of unit) 14 Wire FM aerial (at rear of unit)

○

Batteries (not included)

The radio is operated by internal batteries.

1 Remove the battery compartment cover (8) located underneath the unit by

pushing in the tab and lifting upwards.

2 Insert the batteries: 4 x (AA size) into the battery compartment. 3 Replace the battery compartment cover (8).

Ensure batteries are fitted correctly.

If the unit is not to be used for a prolonged period, remove the batteries in order to avoid battery leakage.

In the interests of environmental safety: dispose of batteries safely.

AC mains adaptor (not included)

The radio has the facility for an ac mains adaptor polarity (centre +) input

voltage indicated on the rear of the product.

Make sure to use a correct adaptor that matches the size of the DC jack,

1.3mm diameter.

Connect the AC adaptor plug into the adaptor socket (at the rear of the unit)

and plug the adaptor into the mains outlet.

AC adaptors are readily available from electrical retailers.

Electro luminescent light

This unit is equipped with a light for easy viewing. You can push any button on the front panel including the SNOOZE button to switch on the light. After 8 seconds the light will automatically switch off.

P. 3 P. 4

P. 2

To set the time

1 Press the TIME button (7) once. The time set indicator will be displayed. You

now have approximately 5 seconds to start setting the time.

2 Press the MINUTE/HOUR button (6) once to move the minute hand

clockwise by 1 minute.

3 Press and hold the MINUTE/HOUR button, the minute hand will move

automatically 8 minutes and then the hour hand will start moving instead.

4 Release the MINUTE/HOUR button and press to set the minutes, each press

will move the hand by one minute. Note: If the minute hand goes past 12, then the hour hand will advance by 1 hour.

To play the radio

1 Slide the FUNCTION SELECTOR switch (12) to the ON position. 2 Set the AM/FM BAND switch (11) to the desired wave band. 3 Adjust the TUNING CONTROL and the VOLUME CONTROL for the desired

station and listening level.

4 To turn off the radio, set the FUNCTION SELECTOR switch to the ‘OFF’

position.

To obtain the maximum FM reception fully extend the wire FM aerial (14) which is located at the rear of the unit and alter the direction of the wire. The aerial for the AM waveband is located inside the unit. To obtain, the maximum AM reception rotate your clock radio.

To set the alarm time

1 Press the ALARM SET button once. The alarm set indicator will be displayed. 2 Press the MINUTE/HOUR button (6) once to move the minute hand

clockwise by 1 minute.

3 Press and hold the MINUTE/HOUR button, the minute hand will move

automatically until 8 minutes and then the hour hand will start moving instead.

4 Release the MINUTE/HOUR button and press to set the minutes, each press

will move the hand by one minute.

5 After setting the desired alarm time, the alarm set indicator will disappear

automatically after a few seconds and the clock will return to the current time.

If the function switch is set to either radio on or off then the alarm defaults to buzzer if the alarm on indicator is lit.

Note: Ensure that the alarm on indicator is lit.

Setting the alarm mode

1 Set the desired alarm time as previously described.

Press the alarm set button once, the alarm on indicator will display. Select which type of alarm you require as follows:-

To wake up to the radio

1 Set the radio as described previously ‘to play the radio’ 1-3. 2 Set the FUNCTION SELECTOR switch (12) to the alarm radio position.

Ensure that the station will be transmitting at the chosen alarm time.

To wake up with the buzzer

1 Set the FUNCTION SELECTOR switch (12) to the BUZZER position. 2 The alarm on indicator will light.

The radio or buzzer will activate at the correct time.

Stopping the alarm (when set to radio or buzzer)

1 Press the ALARM OFF button (5). The Alarm will stop and sound

again 12 hours later. Note: The alarm will not cancel by moving the function switch.

Cancel the alarm

1 Press the ALARM SET button once or twice the alarm indicator disappears

from the display and will cancel the alarm function.

Sleep operation

Your clock radio is equipped with a sleep function that will turn the radio on and switch it off automatically after a set period of time.

1 Press the SLEEP (4) button once the display defaults to 1:30 ie. 1 hour 30

minutes and the sleep set indicator will display.

2 If you wish to reduce the sleep time press the SLEEP button once followed

by the MINUTE/HOUR button. ie. setting the sleep time to 12.05 will give 5 minutes sleep time.

3 Once the sleep time has been set, press the SLEEP button twice the radio

will now come on and play for the set time.

4 Set the FUNCTION SELECTOR switch to alarm buzzer, alarm radio or radio

off. The sleep function will not work when set to the radio on position.

5 After the set sleep time has elasped, the radio will automatically switch off

and the sleep on indicator will disappear.

6 To switch off before the set sleep time has elasped press the SLEEP

button twice to deactivate the sleep indicator.

Note: The sleep function will not cancel by moving the function switch.

Going to sleep and waking to radio or buzzer

1 Set the alarm time as described previously. 2 Set the sleep time as described above. 3 Switch the FUNCTION SELECTOR switch to radio alarm or buzzer. 4 Press the ALARM SET button once, the alarm on indicator will appear on the

clock display.

5 Press the SLEEP button to make the sleep on indicator display on the clock

display.

The radio is now programmed to turn itself off after you go to sleep and the alarm (RADIO or BUZZER) will be on automatically at the preset alarm time.

Snooze operation

The alarm can be interrupted for a 9 minute period. 1 Press the SNOOZE button (1), after 9 minutes the radio or alarm buzzer will

sound again.

P. 5 P. 6

Maintenance

Do not expose your clock radio to extremes of temperature. The radio should be kept in a warm place free from dust and damp. For external cleaning use a soft, clean, damp cloth. Use of detergents may damage the finish.

Technical specification

Batteries

Clock Radio :4 batteries 1.5V Type ‘AA’ (not included)

Radio :FM 88Mhz - 108Mhz

:MW 540Khz - 1605Khz

Warning labels

ATTENTION: For safety reasons, do not remove the cover. There are no user serviceable parts inside the unit. Refer any servicing to qualified engineer.

Guarantee

Morphy Richards products are manufactured to internationally accepted quality standards. In addition to your statutory rights, Morphy Richards guarantee your product to be free from manufacturing and component defects for a period of TWO YEARS from date of purchase.

If your product proves to be defective within 28 days of purchase, your Morphy Richards dealer from whom the product was purchased will be pleased to replace it free of charge.

Should your product develop a defect within the guarantee period but after the replacement period, please return the product to the following address, together with the proof of purchase, brief details of the symptoms and your own name and address.

After Sales Division

Morphy Richards Limited

Talbot Road Mexborough

South Yorkshire

S64 8AJ

Your post office will provide a certificate of posting. The product will be

repaired and returned to you promptly.

If you need any further advice, please call our Helpline (UK local rate) on:

08450 777700 (Mon-Fri)

446/8001/74 Rev 2

Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ

P. 7