Morphy Richards IB25009 User Manual

USER SAFETY INSTRUCTIONS

IMPORTANT

Please read carefully before using the product

• The massager should not be applied if the following symptoms are present:Tuberculosis, benign and malignant tumours, haemorrhages, inflammations of the skin, phlebitis and thrombosis, open and fresh wounds, bruises, broken skin or varicose veins.

• Individuals with pacemakers should not use this product.

• Consult a doctor before using if you are pregnant, diabetic, ill or have any therapeutic questions regarding its use.

• Do not use on any unexplained pain before consulting your doctor.

• Do not apply the unit to wounded, inflamed, blistered or sunburnt skin.

• Disconnect the product from mains supply when not in use or when cleaning.

• Do not cover the product at any time whilst connected to the mains supply.

• Do not take this product into a bathroom, near a water basin or leave in direct sunlight.

• It is recommended that this appliance should not be used by children.

• The appliance is suitable for use on 230 volts AC only.

• The massage should feel pleasant and comfort able. If pain or discomfort occurs discontinue use immediately and consult a doctor.

• Never operate the appliance if it has a damaged cord, if it is not working properly, or if has been dropped or damaged.

• Only use this appliance for its intended use as described in this manual.

• Do not stand on the massager, this will damage it. Sit down first, then place your feet on it.

CAUTION : Do not use if sores or lumps are present.

T wo year guarantee

It is in your interest to retain the retailers receipt as proof of purchase. Please quote the model number if the product develops a fault. This number can be found on the base of the product.

All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced.

If a fault develops after 28 days and within 24 months of original purchase, you should contact the helpline number quoting the model number of the product, or write to the address below. You will be asked to return the product (in secure packaging) to the address below along with a copy of proof of purchase.

The After Sales Division

Morphy Richards Ltd

Mexborough

South Yorkshire

England S64 8AJ

Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK (local rate) 08450 777700, Republic of Ireland 1800 409119

Morphy Richards Website

www.morphyrichards.co.uk

Morphy Richards products are intended for household

use only. Morphy Richards has a policy of continuous

improvement in product quality and design. The

Company, therefore, reserves the right to change the

specification of its models at any time.

Intense body massage centre

MODEL : 25009

446/8001/17 Rev 1

Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ

Instructions

Thank you for buying your new intense body massage centre from Morphy Richards. Please read these instructions carefully before use and keep in a safe place for future reference.

Key features

1 Massage surface 2 Heat slide switch 3 Massage slide switch 4 Magnetic infra-red lens

Features

• Energises and revitalises tired, worn muscles.

• Allows gentle or powerful massage.

• Ideal before and after sports activities.

• Offers relief from minor aches and pains.

• Magnetic infra red lens improves blood circulation and aids massage results.

• Heat and vibrating massage can be used independently or at the same time.

• Y our body massager gives you soothing relief after a busy day of work.

If the massage produces any type of discomfort cease the treatment.

Recommended massage times

1 Massage may be applied once or twice daily. 2 Do not massage the same area for more

than 15 minutes.

For foot massage

Before connecting to the power source, be sure both switches are in the off position. 1 Wash your feet and dry thoroughly . Do not apply

any oils or creams.

2 Position the massager on a firm level floor, close

to an electrical socket.

3 Place a chair in front of the massager. 4 Plug the mains lead into the electrical socket. 5 Sit down on a chair. Do not stand on the

massager as this will damage it.

6 Place your feet on the massager, heels by the

switches.

7 The massage switch can be used on setting one

for a gentle massage or position 2 for a powerful massage.

8 The heat switch has two heat settings that can be

used to suit your requirements. The heat switch can be used independently or together with the massage switch.

Switch the massager to the off position after treatment.

Y our skin may become slightly red and warm after treatment (which indicates that the blood circulation has been stimulated). This is quite normal after any massage treatment and the symptoms will quickly disappear. You may wish to apply a soothing lotion.

For back massage

Before connecting to the power source, be sure both switches are in the off position. 1 Place the massager on a firm chair vertically, close

to an electrical socket.

2 Lean the massager against the back of the chair or

adjust the length of the adjustable feet so that the massager can be hung over the back rest.

3 Plug the mains lead into the electrical socket and

switch on.

4 Sit down on a chair in front of the massager. 5 Lean on the massager gently and adjust the length

of the front feet until you feel comfortable.

6 The massage switch can be used on setting one

for a gentle massage or position 2 for a powerful massage.

7 The heat switch has two heat settings that can be

used to suit your requirements. The heat switch can be used independently or together with the massage switch.

Adjustment of massage centre

For increased comfort, the front feet of the massage centre can be adjusted. They can be unscrewed a maximum of 7 turns, to raise the front of the massager. You will hear a ‘click’ at the end of each turn. Do not try to unscrew the feet more than 7 turns, as this may damage the massage centre.

Maintenance and cleaning

Always unplug the unit from the mains socket before cleaning. Never use liquids or abrasive cleaners to clean the unit. Just wipe with a damp cloth.

Unplug the appliance and store your massager box provided, in a dry place.

Wiring

This product is fitted with a 13A (BS1363) plug. A 3 amp fuse (BS1362) must be used.

Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).

If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted.

IMPORT ANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET.

Mains lead

As a safety precaution and to prolong the life of your appliance, do not wrap the mains lead around the appliance as this will cause damage.