Morphy Richards IB21016, Mark Hill 21016 Instructions Manual

Instructions
Twist & lift TM Salon professional 1800w hairdryer
Model 21016 with unique twist & lift motorised oscillator attachment
Thank you for buying your new Morphy Richards, Mark Hill 1800w hairdryer. Please read these instructions carefully before use and keep in a safe place for future reference.
Key Features
2
Includes
3 metre salon length cable for flexibility and ease of use
Rubberised grip to make styling more comfortable
4 rollers adds volume and bounce, 4 sectioning clips
Motorised twist & lift oscillator attachment to create volume and movement
Adjustable concentrator nozzle to control styling
Cool shot & boost button
Twist & lift
TM
motor control button
3 heat settings for controlled styling
Removable air
inlet filter
Hanging loop
for tidy storage
2 speed settings
Comfort grip
Rubber tips for
comfortable styling
Styling Tips
Having shampooed your hair, ensure that it is rinsed properly as shampoo that is left in the hair will leave it looking dull.
To maximise shine, rinse your hair in cool water thoroughly.
Comb your hair through with a wide toothed comb to remove tangles before styling.
Attachments
When using the twist and lift
TM
attachment, use of a high heat/speed setting may cause the automatic thermal protection cut-out to operate and the hairdryer will stop. Should this occur, switch off the hairdryer and remove the plug from the power socket. Allow to cool, the cut-out will automatically reset, you can then continue to dry your hair using a lower speed.
Cool shot & boost button
Set your style in place with a flow of cool air or use a boost of heat for quicker styling.
Styling
Using the concentrator nozzle
Unclip nozzle for normal use.
The concentrator nozzle may also be adjusted to allow more control over styling.
3
If you are blow drying curly hair into a straight style, you need to concentrate the air down into the shaft of the hair. Close the unique adjustable nozzle up into the narrowest position.
If you want to add more volume and movement throughout the hair, open the nozzle to its widest position.
Using the twist & lift
TM
attachment
Ensure the hair is dried thoroughly before you attempt to lift the roots. To add volume and lift, remove the concentrator nozzle if attached and attach the twist and lift motorised attachment. Toss the hair forwards to loosen, then with the dryer on the desired setting, place against the head, with the tips of the rods touching the scalp and press the twist and lift button, to move the dryer in an oscillating motion. It will continue to oscillate until the button is pressed again which will turn the oscillating motion off.
Wiring
This product is fitted with a 13A (BS1363)
plug. A 13 amp fuse (BS1362) must be used.
Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted.
IMPORTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET.
Mains Lead
As a safety precaution and to prolong the life of your appliance, do not wrap the mains lead around the appliance as this will cause damage.
4
Removable air inlet grille
The air inlet ensures that clean air is used to dry your hair. To remove the air filter, ensure that the hairdryer is unplugged from the mains supply. Hold the hairdryer body firmly then pull the air filter off. The air filter will detach from the hairdryer. Take out the filter to clean away hair and lint using a vacuum cleaner or wash the filter in warm soapy water should it become really dirty. Be sure to let the filter dry properly before refitting to the hairdryer. To refit push the filter until it fits into position.
Important Safeguards
When using your hair appliance, basic safety precautions should always be followed.
1 Read all instructions carefully.
2 Use the appliance for its
intended use only.
3 To protect against the risk of
electric shock, do not immerse the appliance in water or in any other liquids.
4 It is recommended that this
appliance should not be used by children.
5 Be sure that your household
voltage corresponds to the voltage marked on the hairdryer.
6 Always unplug your appliance
when it is not in use.
5
7 Do not leave the hairdryer
switched on whilst unattended.
8 Do not take this product into a
bathroom or use near a water basin.
9 In the event of cable damage do
not attempt to replace the mains cable, return to morphy richards.
10 After use do not store until the
product has cooled down.
11 Do not place the hairdryer on
surfaces likely to be easily damaged by the heat.
12 Ensure the filter is cleaned regularly.
Morphy Richards products are intended for household use only. Morphy Richards has a policy of
continuous improvement in product quality and design. The Company, therefore, reserves the right to
change the specification of its models at any time.
446/8005/08 Rev 1
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
Two Year Guarantee
It is in your interest to retain the retailers receipt as proof of purchase. Please quote the model number if the product develops a fault. This number can be found on the handle of the product.
All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced.
If a fault develops after 28 days and within 24 months of original purchase, you should contact the helpline number quoting the model number of the product, or write to the address below. You will be asked to return the product (in secure packaging) to the address below along with a copy of proof of purchase.
The After Sales Division
Morphy Richards Ltd
Mexborough
South Yorkshire
England S64 8AJ
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK 0870 060 2614, Replacement parts 0870 167 6645, Republic of Ireland 1800 409119
Morphy Richards Website www.morphyrichards.co.uk
Loading...