Morphy richards HD4003 user Manual

Wiring

This product is fitted with a 13A (BS1363) plug.
A 13 amp fuse (BS1362) must be used.

Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating Current).

If the socket outlets in your home are not suitable for
the plug supplied with this appliance the plug should be
removed and the appropriate one fitted.

IMPORTANT : THE PLUG REMOVED FROM THE MAINS
LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG
WITH BARED FLEXIBLE CORD IS HAZARDOUS IF
ENGAGED INTO A LIVE SOCKET OUTLET.

Important Safeguards

When using your hair appliance, basic safety
precautions should always be followed.

1 Read all instructions carefully.
2 Use the appliance for its intended use only.
3 To protect against the risk of electric shock, do not

immerse the appliance in water or in any other
liquids.

4 Be sure that your household voltage corresponds

to the voltage marked on the dryer.

5 The air inlet grille should not be obstructed when

the hairdryer is in use.
6 Always unplug your appliance when it is not in use.
7 It is recommended that this appliance should

not be used by children.
8 Do not leave the hairdryer switched on whilst

unattended.
9 When the hairdryer is used in a bathroom, unplug

it after use since the proximity of water presents a

hazard. For additional protection the installation of

a residual current devise (RCD) with a rated

residual operating current not exceeding 30 ma is

advisable in the electrical circuit supplying

the bathroom.

Two Year Guarantee

It is in your interest to retain the retailers receipt
as proof of purchase. Please quote the model
number if the product develops a fault. This number
can be found on the handle of the product.

All Morphy Richards products are individually tested
before leaving the factory. In the unlikely event of
any appliance proving to be faulty within 28 days
of purchase it should be returned to the place of
purchase for it to be replaced.

If a fault develops after 28 days and within 24
months of original purchase, you should contact
the helpline number quoting the model number of
the product, or write to the address below. You
will be asked to return the product (in secure pack­aging) to the address below along with a copy of
proof of purchase.

The After Sales Division

Morphy Richards Ltd

Mexborough

South Yorkshire

England
S64 8AJ

Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri)
UK (local rate) 08450 777700,
Republic of Ireland 1800 409119

Morphy Richards products are intended for household

use only. Morphy Richards has a policy of continuous

improvement in product quality and design. The

Company, therefore, reserves the right to change the

specification of its models at any time.

AJX 4003 Issue 1

05.00

Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ

1200w hairdryer

with multi attachments

MODEL : HD4003

Instructions & Style Guide

Thank you for buying your new 1200w Essentials multi
attachment hairdryer from Morphy Richards. Please
read these instructions carefully before use and keep in
a safe place for future reference.

Key Features

I

B

C

D

E

A 2 heat (Medium/High)/speed settings for

fast controlled drying.

B Concentrator nozzle for accurate styling.
C Volume diffuser
D Diffuser
E Brush attachment
F Comb attachment
G Hanging loop for easy storage.
H Cool shot button
I Air inlet grille.
J 2 metre salon length cable.

H

A

G
F

Styling

Towel dry hair before using the hairdryer.

Set the dryer on the highest setting/speed and circulate
airflow through the hair, trying not to concentrate the
airflow on any one section of hair for a long period of
time.

As soon as the hair is almost dry, lower the speed
setting and use a styling brush to shape the hair as
desired.

Styling Tips

Your hairdryer is one of the most important beauty aids
you own, and the way you use it has a significant
impact on the look and condition of your hair.

Having shampooed your hair, ensure that it is rinsed
properly as shampoo that is left in the hair will leave it
looking dull.

To maximise shine, rinse your hair in cool water when
you have rinsed it thoroughly.

Comb your hair through with a wide toothed comb to
remove tangles before styling.

When drying your hair smooth, make sure each section
is completely dry before moving onto the next or your
hair will kink or frizz

When using brush, comb, diffuser or
volume diffuser

Use on a medium heat/speed setting only. Use of a high
heat/speed setting may cause the automatic thermal
protection cut-out to operate and the hairdryer will
stop. Should this occur, switch off the hairdryer and
remove the plug from the power socket. Allow to cool,
the cut out will automatically reset, you can then
continue to dry your hair but at a lower heat/speed
setting.

Using the concentrator nozzle

The concentrator attachment allows you to direct heat
for smooth styling. Unclip nozzle for normal use.

Using the diffuser

For loose natural curls, remove the concentrator nozzle
if attached and attach the diffuser and invert the dryer
so that it is pointing upwards. Place the hair into the
diffuser bowl so that your hair weight is supported and
can fall into natural curls.

It is advisable to use a medium heat/speed setting to
diffuse air around the curls until dry. For more curl try
scrunch drying your hair in the diffuser.

Using the volume diffuser

For a greater volume effect, remove the concentrator
nozzle if attached and attach the volume diffuser. Toss
the hair forwards to loosen, then with the dryer on the
medium heat/speed setting, place against the head,
with the tips of the rods touching the scalp. Move the
volume diffuser in a circular motion to dry and lift the
hair.

The volume diffuser can also be used with a combing
motion to help straighten permed or curly hair whilst
drying.

Using the styling brush and comb

Part dry the hair with the hairdryer. Attach either the
brush or comb attachment. Use only the medium heat/
speed setting.

Starting from the scalp brush or comb the hair down
through the hair to the ends. Repeat the process all
over the head.

Cool shot button

Set your style in place after drying your hair with a
flow of cool air by pressing the cool shot button.

Mains Lead

As a safety precaution and to prolong the life of your
appliance, do not wrap the mains lead around the
appliance as this will cause damage.