Wiring
Two Year Guarantee
This product is fitted with a 13A (BS1363) plug.
A 13 amp fuse (BS1362) must be used.
Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not
suitable for the plug supplied with this appliance
the plug should be removed and the appropriate
one fitted.
IMPORTANT : THE PLUG REMOVED FROM THE
MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH BARED FLEXIBLE
CORD IS HAZARDOUS IF ENGAGED INTO A LIVE
SOCKET OUTLET.
It is in your interest to retain the retailers receipt
as proof of purchase. Please quote the model
number if the product develops a fault. This number
can be found on the handle of the product.
All Morphy Richards products are individually tested
before leaving the factory. In the unlikely event of
any appliance proving to be faulty within 28 days
of purchase it should be returned to the place of
purchase for it to be replaced.
If a fault develops after 28 days and within 24
months of original purchase, you should contact
the helpline number quoting the model number of
the product, or write to the address below. You
will be asked to return the product (in secure packaging) to the address below along with a copy of
proof of purchase.
The After Sales Division
Morphy Richards Ltd
Mexborough
South Yorkshire
England
S64 8AJ
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri)
UK (local rate) 08450 777700,
Republic of Ireland 1800 409119
1200w Compact hairdryer
with concentrator nozzle
MODEL : HD4001
Morphy Richards products are intended for household
use only. Morphy Richards has a policy of continuous
improvement in product quality and design. The
Company, therefore, reserves the right to change the
specification of its models at any time.
CP 4001 Issue 1
04.00
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
Instructions & Style Guide
Thank you for buying your new 1200w Essentials
hairdryer from Morphy Richards. Please read
these instructions carefully before use and keep
in a safe place for future reference.
Key Features
B
F
A
C
D
A 2 heat/speed settings for fast controlled
drying.
B Concentrator nozzle for accurate styling.
C Dual voltage for the regular traveller.
- 230v UK/Europe
- 120v USA
D Hanging loop for easy storage.
E 2 metre salon length cable.
F Air inlet grille.
Styling
Towel dry hair before using the hairdryer.
Set the dryer on the highest setting/speed and
circulate airflow through the hair, trying not to
concentrate the airflow on any one section of
hair for a long period of time.
As soon as the hair is almost dry, lower the
speed setting and use a styling brush to shape
the hair as desired.
Styling Tips
Your hairdryer is one of the most important
beauty aids you own, and the way you use it has
a significant impact on the look and condition of
your hair.
Having shampooed your hair, ensure that it is
rinsed properly as shampoo that is left in the hair
will leave it looking dull.
To maximise shine, rinse your hair in cool water
when you have rinsed it thoroughly.
Comb your hair through with a wide toothed
comb to remove tangles before styling.
When drying your hair smooth, make sure each
section is completely dry before moving onto the
next or your hair will kink or frizz
The concentrator attachment allows you to direct
heat for smooth styling.
Important Safeguards
When using your hair appliance, basic safety
precautions should always be followed.
1 Read all instructions carefully.
2 Use the appliance for its intended use only.
3 To protect against the risk of electric shock,
do not immerse the appliance in water or in
any other liquids.
4 Be sure that your household voltage
corresponds to the voltage marked on the
dryer.
5 The air inlet grille should not be obstructed
when the hairdryer is in use.
6 Always unplug your appliance when it is not
in use.
7 It is recommended that this appliance should
not be used by children.
8 Do not leave the hairdryer switched on whilst
unattended.
9 When the hairdryer is used in a bathroom,
unplug it after use since the proximity of
water presents a hazard. For additional
protection the installation of a residual
current devise (RCD) with a rated residual
operating current not exceeding 30 ma is
advisable in the electrical circuit supplying
the bathroom.
Mains Lead
As a safety precaution and to prolong the life of
your appliance, do not wrap the mains lead around
the appliance as this will cause damage.