Page 1
Big Pod bagless vacuum cleaner
Please read and keep these instructions
getting the best from your
new cleaner...
If your cleaner is not picking up as well as it
should, please check
• Filters
To maintain performance,it is very important
to clean the, pleated filter at every emptying.
The filter may also be washed but must be
fully dry before re-fitting.
See page 5 for more details.
A spare pleated filter is provided.
• Blockages
Check the tools and hose for blockages.
0060 2615
6
d
UK
Helpline: 0870060 2604
Replacement parts: 0870 167 6635
Ireland 1800 409119
www.morphyrichards.com
For replacement parts, help with using your Morphy Richards
products and lots more, contact us by phone or through our website
73195 rev2 24/10/05 11:55 AM Page 1
elpline:
Replacement parts:
Irelan
7
70 167 664
1800 409119
Page 2
2
Important safety
instructions
The use of any electrical appliance
requires the following common sense safety
rules.
Primarily there is danger of personal
injury and secondly danger of damage to the
appliance and property. These are indicated
in the instructions text by the following two
conventions:
WARNING: Danger of personal injury
IMPORTANT: Damage to the appliance
In addition we offer the following
essential safety advice.
Location
• Do not use or keep this product outside
when it is raining.
• Do not store the appliance near hot ovens
or heating appliances.
Mains lead
• Do not allow the mains lead to become
strained or run this appliance over it.
• If the electrical cable becomes damaged
the complete cable assembly must be
replaced. Do not attempt this task
yourself, contact us using the helpline
number.
Children
• Children do not understand the dangers
associated with operating electrical
appliances. Never allow children to use
this appliance.
Other safety considerations
• Never use in the presence of explosive
liquids or vapours.
• Never pick up inflammable or poisonous
liquids such as petrol, copier toner, or
other volatile substances. Never pick up
acids, asbestos or asbestos dust.
• Always disconnect the appliance from the
mains supply after use or prior to
cleaning or emptying.
• The appliance should never be left
running unsupervised.
Product safety
• Never use the appliance without the filter
installed.
• Never use the appliance to vacuum hot
ashes, broken glass, sharp objects or
liquids.
• Never modify the cleaner in any way.
• Repairs to electrical appliances are only
to be undertaken by trained personnel.
Unprofessional repairs can be dangerous
for users.
• Use only genuine Morphy Richards spare
parts and accessories.
Electrical
requirements
Check that the voltage on the rating plate
of your appliance corresponds with your
house electricity supply which must be A.C.
(Alternating Current).
If the socket outlets in your home are not
suitable for the plug supplied with this
appliance, the plug should be removed and
the appropriate one fitted.
If you cut off the plug and let go of the
cable it will rewind into the machine.
Therefore you must pull out a length of cable
and secure it before cutting off the plug and
refitting a new one.
WARNING: The plug removed from
the mains lead, if severed, must be
destroyed as a plug with bared flexible
cord is hazardous if engaged into a live
socket outlet.
Should the fuse in the 13 amp plug
require replacement, a BS1362 13 amp fuse
must be fitted.
73195 rev2 24/10/05 11:55 AM Page 2
Page 3
⁄
¤
‹
›
fl
‡
‚
Á
‰
Ë
„
Ê
·
fi
Â
Features
⁄ Pod release latch
¤ Cable rewind button
‹ Handle
› Power on/off switch
fi Wheels
fl Dust pod
‡ Hose inlet
· Hose connector release button
‚ Storage hook
„ Exhaust filter and cover
‰ Tube storage slot
Accessories you should have
 Floor nozzle
Ê Hose/handle with airflow control
Á Upholstery nozzle
Ë Telescopic metal tube
È Tool storage clip
Í Filter assembly
Î Pleated filter
Ï Mesh filter
Ì Small cleaning brush
Ó Motor inlet filter
3
A
Í
È
Î
Ó
Ì
Ï
73195 rev2 24/10/05 11:55 AM Page 3
Page 4
Assembly
IMPORTANT: Switch off before fitting or
removing accessories.
Fitting the flexible hose
Insert the flexible hose connector · in
the hose inlet duct ‡ at the front of the
product. Press until it clicks into position B.
Removing the flexible hose
Press the hose connector release button
to release the flexible hose. Pull the hose
firmly from the hose inlet duct.
Fitting the telescopic tube and
accessories
Attach the telescopic tube Ë to the
handle end Ê of the hose A. Extend to the
required length by pressing down the slider
release and pulling out the tube.
Attach the floor nozzle  to the
telescopic tube and set the floor nozzle
lever to the appropriate position.
Other accessories include:
•Crevice tool for awkward places, corners
and behind radiators etc.
• Brush attachment for pelmets, delicate
objects etc.
• Upholstery nozzle Á for sofas,
armchairs etc.
•Tools can be stored on the tool storage
clip È that slides onto the telescopic
tube.
Controls
On/off control
Press the on/off switch › to start the
machine, press again to turn off.
Suction control on the handle
The suction power can be adjusted
using the fingertip control on the handle C.
Closed: full suction
Open: low suction
2-position wheeled floor nozzle
Â
The brushes should be retracted for use
on carpets and extended for use on hard
floors, by adjusting the lever on top of the
floor nozzle.
Use
1 Assemble the cleaner as required.
2 While holding the cleaner, use the plug
to pull out the full length of cable. A red
mark indicates the maximum length. Do
not try to pull the cable past this mark.
3 Connect plug to mains supply
4 Press the on/off button
5 Check the suction control and floor
nozzle controls are set as required.
6 Start vacuuming
Do not use the cleaner in an
upright position.
4
Release button
B
C
73195 rev2 24/10/05 11:55 AM Page 4
Page 5
5
D
After use
1 Switch off the vacuum cleaner.
2 Unplug from the mains.
3 Rewind the cable by pressing the rewind
button ¤.
WARNING: When using the cable
rewind, always hold the plug as the
cable will rewind quickly.
Emptying the pod
WARNING: Never operate the
cleaner without the dust pod filter
assembly Ï or motor protection filter
fitted.
1 Disconnect the cleaner from the mains
socket.
2 Disconnect the hose from the cleaner.
3 Remove the dust pod fl from the
cleaner by pushing the release latch
⁄D.
4 Take the dust pod to the bin.
5 Raise the filter assembly Í handle then
lift out the filter assembly from the dust
pod flE.
6 Empty the dust pod into the bin.
7 Place dust pod safely to one side.
8 Use the small brush Ì provided
(located on filter assembly) to remove
any fluff from the outside of the mesh
filter G.
9 Rotate the mesh filter Î clockwise to
release the mesh filter and pleated filter
Ï assembly from the filter holder G.
10 Rotate and flick the pleated filter
inside the mesh filter to shake
loose the dust. E
11 Lift out the pleated filter Ï then empty
out the dust from the mesh filter Î into
the bin E
12Re-assemble filter assembly by placing
the pleated filter inside the mesh filter
then place the filter holder on top in the
correct position. Rotate the mesh filter
assembly anti-clockwise to lock the
assembly together H.
13 Place the filter assembly back inside the
dust pod making sure the filter assembly
is placed level and that the filter holder
seal is seated neatly.
14 Re-attach the dust pod to the cleaner by
hooking the bottom of the dust pod in
first, then closing the pod until it clicks
and the pod release catch ⁄. is fully
down and secured I.
E
F
73195 rev2 24/10/05 11:55 AM Page 5
Page 6
If there is resistance when you re-fit
the pod onto the cleaner, remove and
carefully reseat the filter assembly back
into the pod, ensuring the filter assembly
seal is located fully and neatly.
Washing the
pleated filter
For total cleaning of the pleated filter it
should be washed with warm water with no
detergents. Allow filter to air dry.
A SPARE FILTER IS PROVIDED. This
allows continued use of the cleaner whilst
the other filter is drying.
IMPORTANT: The filter must be
completely dry before re-fitting.
G
73195 rev2 24/10/05 11:55 AM Page 6
Page 7
6
Motor protection
filter
This cleaner is fitted with a motor
protection filter.
IMPORTANT: NEVER USE THE VACUUM
CLEANER WITHOUT THIS IN PLACE.
To clean the motor protection
filter
1 Remove the filter from the filter grille J.
2 Rinse the filter in luke warm water and
Dry the filter completely.
3 Put the filter back into the filter grille and
reassemble.
Storage position
The vacuum cleaner can be stored in an
upright position. Slide the storage hook ‚
on the floor nozzle into the slot on the base
of the product ‰ and the tubes, hose and
floor nozzle are held securely K.
J
K
G
I
73195 rev2 24/10/05 11:55 AM Page 7
Page 8
Exhaust filter
This filter should be replaced every
12 months or sooner if required.
Remove the exhaust filter grille by pulling
the locking tabs towards you L. Remove the
used filter. Insert the clean micro exhaust
filter and replace the filter grille.
IMPORTANT
• Always disconnect the cleaner from the
mains when checking filters.
• All filters should be checked regularly for
signs of damage, preferably after each
cleaning task. The filters must be replaced
immediately if they become damaged.
• Always make sure all filters are fitted
before use. Failure to do so may result in
damage to your product.
• If the sound of the cleaner changes
slightly, clean the filters and check for
blockages.
Safety cut-out
If the cleaner overheats a motor
protection thermostat will automatically
switch the cleaner off. If this happens,
switch the cleaner off, unplug from
power supply and leave the cleaner to
cool for at least 45 minutes. Check the
airways for blockages, empty dust canister
and clean the filters before restarting.
Care and
maintenance
Your cleaner is manufactured to withstand
normal day-to-day use, but an occasional
wipe over with a damp cloth will help
maintain its good looks. Abrasive cleaners
should not be used.
Purchasing filters
Use original filters. Replacement filters
can be purchased from specialist retailers or
directly from our Replacement Parts
telephone number shown below.
Helpline
If you have any difficulty with your
appliance do not hesitate to call us. We are
likely to be more help than the store from
where it was bought.
Please have the following information
ready to enable our staff to help you.
• Name of product
• Model number as shown on the underside
of the appliance.
7
L
73195 rev2 24/10/05 11:55 AM Page 8
Page 9
Your two-year
guarantee
• It is important to retain the retailers receipt as
proof of purchase. Staple your receipt to this
back cover for future reference.
Please quote the following information if the
product develops a fault. These numbers can be
found on the base of the product.
Model no. Serial no.
All Morphy richards products are individually
tested before leaving the factory. In the unlikely
event of any appliance proving to be faulty
within 28 days of purchase it should be returned
to the place of purchase for it to be replaced.
If the fault develops after 28 days and within
24 months of original purchase, you should
contact the helpline number quoting model
number and serial number on the product, or
write to Morphy Richards at the address shown.
You may be asked to return a copy of proof
of.purchase Subject to the exclusions set out
below (1-5), the faulty appliance will then be
repaired or replaced and dispatched usually
within seven working days of receipt.
If you suspect a fault, follow the simple
checks detailed below before returning the
appliance or calling the helpline.
• Check the filters for blockages.
• Check the hose and tubes for blockages.
• Check the plug is firmly in the socket and the
supply is switched on.
• Make sure the socket is working by trying
another appliance.
If for any reason this item is replaced during
the two-year guarantee period, the guarantee on
the new item will be calculated from original
purchase date. Therefore it is vital to retain your
original receipt or invoice to indicate the date of
initial purchase.
To qualify for the two-year guarantee the
appliance must have been used according to
the manufacturers instructions. For example
filters must be cleaned regularly and replaced if
damaged.
Morphy richards shall not be liable to replace
or repair the goods under the terms of the
Guarantee where:
1 The fault has been caused or is attributable
to accidental use, mis-use such as
neglecting to regularly clean filters or used
contrary to the manufacturers
recommendations or where the fault has
been caused by power surges or damage
caused in transit.
2 The appliance has been used on a voltage
supply other than that marked on the
products.
3 Repairs have been attempted by persons
other than our service staff (or authorised
dealer).
4 Where the appliance has been used for hire
purposes or non-domestic use.
5 The guarantee excludes consumables such
as some filters.
This guarantee does not confer any rights
other than those expressly set out above and
does not cover any claims for consequential
loss or damage. This guarantee is offered as an
additional benefit and does not affect your
statutory rights as a consumer.
• This guarantee is valid in the
UK and Ireland only.
Morphy richards products are intended for
household use only.
Morphy richards has a policy of continuous
improvement in product quality and design.
The company, therefore reserves the right to
change the specification of its models at any
time.
The After Sales Division
Morphy richards Ltd, Mexborough
South Yorkshire, England, S64 8AJ
Helpline (office hours)
UK 0870 060 2604
Republic of Ireland 1800 409119
VC73195MUK Rev 2 10/05
73195 rev2 24/10/05 11:55 AM Page 9
Loading...