60 RC SS
OT
G 0 CSS
51
0
T
EMP
2 0
0
10
0
52
0
M
ODE
P
OW
RE
0
M
INU
T
E
1
0
60
M
in
2
0
6
R
30
Important safeguards:
1. Read all the instructions.
2. Do not use the oven toaster griller (OTG)
other than its intended use.
3. Do not use outdoors.
4. Do not immerse the OTG, power cord or
power plug in water or other liquid.
5. Do not let the mains lead hang over the
edge of a worktop where a child could
reach it.
6. Never allow a child to operate the OTG.
7. Unplug from the socket when not in use
and before cleaning. While removing the
plug from the socket never pull on the
power cord.
8. Do not operate the OTG with damaged
plug or after the OTG has malfunctioned or
has been dropped or damaged in any way.
Contact Morphy Richards service center
for advice on examination, repair, electrical
or mechanical adjustment.
9. Do not move the OTG when plugged in or
hot.
10. Do not let the mains lead contact hot
surfaces. Never wrap the cable around the
OTG.
11. To avoid risk of burns, do not touch the
heating element, outer metal surface and
front glass door of the OTG when in use &
hot. Use tongs for handling hot cooking
tray, wire rack & rotisserie.
12. Place the OTG on a stable, plane and heat
resistant surface. Special care should be
taken to keep the OTG away from
flammable materials such as curtains or
draperies during and after use. Do not use
underneath cupboards.
13. Never cover the OTG when in use.
14. Do not apply water on the front glass while
in operation or when it is hot as the glass
could crack otherwise.
15. Oversized foods or metal utensils must not
be inserted in a toaster oven as they may
create a fire or risk of electric shock.
16. Do not place any of the following materials
in the oven: cardboard, plastic, paper, or
anything similar.
17. Do not store any materials, other than
recommended accessories, in this oven
when hot.
18. Always wear protective, insulated oven
gloves when inserting or removing items
from the hot oven.
19. In order to comply with safety regulations
and to avoid hazards please contact
nearest Morphy Richards authorized
service centre for service.
Save these instructions:
Electrical requirements:
Check that the voltage on the rating plate of
your appliance corresponds with your house
electricity supply which must be A.C.
IMPORTANT: The plug removed from the
mains lead, if severed, must be destroyed as a
plug with bared flexible cord is hazardous if
engaged into a live socket outlet.
WARNING: This appliance must be earthed.
2
OTG 60 RC SS
TE P
M
1
00
50
1
2
0
0
5
2
0
M
O
DE
M
I
NUT
E
PO
WE
R
0
10
2
0
3
0
6
0
Min
60 Litres
Rotisserie handle
Crumb Tray
6
150
MTE P
2
00
1
7
8
9
10
11
00
250
OM
D
E
P
OWE
R
0
M
INU
T
E
10
60
M
in
20
3
OTG 6
0 S
RC
0
S
6
5
4
3
2
1
12
13
Rotisserie switch
Convection fan switch
7
Timer knob
Power Indicator
Function select knob
Temperature knob
Door handle
8
Wire rack
9
Baking plate
10
Heating element
11
Crumb tray
12
Rotisserie set
Rotisserie handle
13
14
Tray handle
14
Before first use:
1. Carefully unpack the OTG, accessories,
and printed material. Remove stickers (if
any, except the rating label).
2. Read all the instructions provided in this
manual carefully to familiarise yourself with
the product.
3. Wipe the glass door and the inner cavity of
the OTG with a moistened cloth. Wipe
again with a dry cloth.
4. Place the OTG on a plane and heat
resistant surface. Leave a space of at least
4 inches (100 mm) between the back cover
of the OTG and the wall.
5. Insert the power plug into a suitable power
socket and switch ON the OTG by setting
the timer at 10 minutes.
6. Let the OTG heat up for 10 minutes with
function select knob at "toast/convection
mode" position and temperature control
knob at 230 C. A slight smell may be
0
emitted. This is normal in any electrical
appliance and will last only for a short time.
Ensure sufficient ventilation. Switch OFF
the OTG by turning the timer knob to OFF
position after 10 minutes.
Instructions for use:
1. Before every use, preheat the OTG for 10
minutes with function select knob on your
desired function position and temperature
control knob at desired temperature.
2. Pre-heating need not be done for second
and subsequent consecutive cooking
operations, if the time between the first and
the s ec o nd c o ns ecu tiv e coo kin g
operations is lesser than 5 minutes.
3. Set the time with timer knob as per the
requirement of the recipe (exclude the pre
heating time). The OTG
will switch ON, the
moment the timer knob is set to any
desired cooking time. After the set time
elapses, the power supply to the unit
would shut off automatically. If you desire
to switch off the OTG at any time, turn the
timer knob back to OFF position.
4. Open the glass door after the cooking
function is over, always use the glass door
handle.
5. To remove the baking tray, always use the
baking tray handle.
Controls & functions:
1. Temperature control knob:
This knob helps to set the temperature as
per the requirement (0-230 C)of the recipe.
2. Function Select Knob:
This knob is used to set the desired function
in the OTG:
1. Toast ( )
Place the wire rack on the centre rack
l
position.
Set the temperature dial to the desired
l
temperature.
Set the timer dial to the desired cooking
l
time.
2. Bake ( )
Place the baking tray on the center rack
l
position. Shut the oven door.
Set the temperature dial to the desired
l
temperature.
Set the timer dial to the desired cooking
l
time.
Press the convection function button
l
While baking cakes, pies, cookies & bread
l
0
4
Loading...