Morphy richards 43130 Instructions manual

Brushed stainless steel jug kettle

Please read and keep these instructions

getting the best from your new kettle...

• Empty the water out of the kettle after first boiling

To clean away any deposits that are left in the kettle after the

manufacturing process

• Descale as appropriate for the hardness of the water in your area

It is important to descale as the performance of the kettle and auto switch-off will be impaired

• Safety first

Always pour water slowly and carefully to prevent the splashing of scalding water.

•Fast boil kettles perform differently

If your kettle is a fast boil model, it may sound louder during boiling and switch off suddenly with no after noise - this is normal.

www.morphyrichards.co.uk

Important safety instructions

The use of any electrical appliance requires the following common sense safety rules.

Primarily there is danger of injury or death and secondly the danger of damage to the appliance. These are indicated in the text by the following two conventions:

WARNING: Danger to the person!

IMPORTANT: Damage to the appliance! In addition we offer the following safety advice.

Location

• Always locate your kettle away from the

edge of the worktop.

• Ensure that the kettle is used on a firm,

flat surface.

• Do not use the kettle outdoors or in a

bathroom.

•WARNING: Do not place the kettle onto

a metal tray or metal surface whilst in

use.

Children

• Children do not understand the dangers

associated with operating electrical

appliances. Never allow children to use

this appliance.

•Teach children to be aware of dangers in

the kitchen, warn them of the dangers of

reaching up to areas where they cannot

see properly or should not be reaching.

Mains lead

• The mains lead should reach from the

socket to the base unit without straining

the connections. Reduce the length of

the lead by storing the excess in the

cord storage facility in the base unit.

• Do not let the mains lead hang over the

edge of the worktop where a child could

reach it.

• Do not let the lead run across an open

space e.g. between a low socket and

table.

• Do not let the lead run across a cooker or toaster or other hot area which might damage the cable.

• Do not place the kettle where the mains lead could fall into a sink.

Your safety

• Always pour hot water slowly and carefully without tipping the kettle too fast to prevent splashing and spillage.

• Extreme caution must be used when moving a kettle containing hot water.

• Do not touch hot surfaces, use handles or knobs.

• Always close the lid securely, otherwise the kettle may not switch off automatically and may spit out boiling water.

•Avoid contact with steam from the spout when the water is boiling or just after it has switched off.

•Take care if opening the lid for re-filling when the kettle is hot.

• Do not fill above the MAX mark, otherwise boiling water may be ejected.

• Do not hold the switch in the on position or tamper with the switch to fix it in the on position as this may cause damage to the switch-off mechanism.

• Unplug from the outlet before cleaning.

• Allow to cool before putting on or taking off parts and before cleaning.

Treating scalds

• Run cold water over the affected area immediately. Do not stop to remove clothing, get medical help quickly.

Other safety considerations

•To protect against fire, electric shock and personal injury do not immerse cord, plug or kettle in water or any other liquid.

• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Ring the helpline number for advice on examination and repair.

• The use of attachments or tools not recommended or sold by Morphy Richards may cause fire, electric shock or injury.

• Do not attempt to connect any other appliance to the base unit or this appliance to another base unit.

•Do not tamper with the connector in any way.

• Do not use the kettle for any use other than to boil water.

• Do not use outdoors.

• Do not place the kettle on or near a hot gas or electric burner or in a heated oven.

• The kettle must not be on the base unit when being filled with water.

• The mains lead of the cordless base cannot be repaired. If the mains lead is damaged, the cordless base should be discarded and replaced.

•Unplug from the outlet when not in use.

‹

Features

⁄

ﬁ

›

‡

‚

„

ﬂ

Electrical requirements

Check that the voltage on the rating

plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating current).

For appliances with fitted plug.

If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted.

IMPORTANT : THE PLUG REMOVED

FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH A BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET.

Should the fuse in the 13 amp plug

require changing a 13 amp BS1362 fuse must be fitted.

WARNING: THIS APPLIANCE MUST

BE EARTHED.

⁄ Lid ¤ Lid knob ‹ Spout filter › Concealed element ﬁ 360˚connector ﬂ Cordless base unit ‡ Cord storage

· On/off switch ‚ Power on neon (water gauge illuminates) „ Water level indicator

+ 4 hidden pages