Morphy Richards 28024 User Manual

Illustration

Dual alarm clock

28024 OPERA TING INSTRUCTIONS

AL1 AL2

Location of controls

1 Alarm button 2 PM indicator 3 Alarm 1 indicator 4 Time button 5 Snooze button 6 Fast forward button

OFF

ALARM TIME

AL 1 AL 2

SNOOZE FAST

FORWARD

SLOW

REVERSE

3 4 5 6

7 Alarm 2 indicator 8 Clock display 9 Slow reverse button 10 Speaker 11 Battery compartment 12 Alarm selector switch

11 10

8 7

Electrical requirements

Check the voltage on the rating plate of your digital clock corresponds with your house electricity supply which must be A.C. (alternating current).

For digital clocks with a fitted plug.

If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted.

IMPORT ANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH A BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET .

Should the fuse in the 13 amp plug require changing a 3 amp BS1362 fuse must be fitted.

P.2

Battery back-up facility (Unit will work without a battery being fitted)

Your alarm clock is equipped with a battery back-up facility. 1 Remove the battery compartment cover (located underneath the unit)

by pushing in the clip and lifting off.

2 Insert a battery size 9 volts PP3/6LR61 (Ensure battery is inserted

correctly) 3 Replace the battery compartment cover. Should a power interruption occur the clock will continue to run,

however, time keeping will not be accurate. The display will be extinguished to conserve battery life but the memory will retain details of the clock time and alarm settings.

If the optional battery is not installed in case of the AC power failure the display will blink to indicate the power was interrupted. You will need to reset the clock and alarm.

Battery back-up is designed to operate for a short period only.

If the unit is not to be used for a prolonged period, remove the battery to avoid battery leakage.

In the interests of environmental safety : dispose of batteries safely.

P.3 P.4

Switching on and setting the clock time

Set alarm 2

Before any alarm functions can be used on your alarm clock you must first set the clock to the correct time.

1 Place the unit on a flat surface. Plug the mains plug into the wall

socket and switch on the wall socket.

2 The clock LED display will flash. 3 Press and hold the TIME SET button and simultaneously hold

down the FAST FORW ARD button or the SLOW REVERSE button. The LED clock display will fast forward or reverse the minutes and hour segments. Release all buttons when the correct time is set.

4 The PM indicator will illuminate to indicate 12.00 midday has

been reached.

Setting the clock alarm time

Set alarm 1

1 Slide the alarm selector switch to the AL1 position. Alarm 1

indicator will light.

2 Press and hold the ALARM set/off button and simultaneously

hold down the FAST FORWARD button or SLOW REVERSE button. The clock display will fast forward or reverse the minutes and hour segments. Release all buttons when the correct alarm time is reached.

1 Slide the alarm selector switch to the AL2 position. Alarm 2

indicator will light. 2 Press and hold the ALARM set/off button and simultaneously

hold down the FAST FORW ARD button or SLOW REVERSE

button. The clock display will fast forward or reverse the

minutes and hour segments. Release all buttons when the correct

alarm time is reached. If set to AL1 or AL2 the alarm will operate at the preset alarm times.

Cancelling the alarm

The alarm is programmed to run for 59 minutes. 1 Press the SNOOZE button to stop the alarm temporarily, the

alarm will repeat again in 7 minutes. 2 To cancel the alarm press the alarm set/off button. (The alarm

will automatically activate 24 hours later). 3 If the alarm is no longer required slide the alarm selector switch

to the OFF position. (The alarm indicator(s) will switch off).

Snooze function

You can press the SNOOZE button after the alarm has sounded which allows 7 minutes of snooze time. After 7 minutes the alarm will sound again.

P.5 P.6

Maintenance

Do not expose your clock to extremes of temperature. The product should be kept in a warm environment free from dust and damp. For external cleaning use only a soft, clean, damp cloth. Use of detergents may damage the finish.

Technical specification

AC Power supply : 230v 50Hz Battery back-up : 9V DC type 6LR61/PP3

(not included)

Warning

WARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture.

ATTENTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside the unit. Refer any servicing to qualified personnel.

To prevent fire or shock hazard do not expose this apparatus to dripping or splashing.

1 When the alarm sounds press the SNOOZE button.

(The snooze default is set for 7 minutes and then resumes). The snooze function will cease to operate after 59 minutes.

Guarantee

Morphy Richards products are manufactured to internationally accepted quality standards. In addition to your statutory rights, Morphy Richards guarantee your product to be free from manufacturing and component defects for a period of TWO YEARS from date of purchase.

If your product proves to be defective within 28 days of purchase, your Morphy Richards dealer from whom the product was purchased will be pleased to replace it free of charge.

Should your product develop a defect within the guarantee period but after the replacement period, please return the product to the following address, together with the proof of purchase, brief details of the symptoms and your own name and address.

After Sales Division

Morphy Richards Limited

T albot Road Mexborough

South Yorkshire

S64 8AJ

Your post office will provide a certificate of posting. The product will be repaired and returned to you promptly.

If you need any further advice, please call our Helpline (UK local rate) on: 08450 777700 (Mon-Fri)

Morphy Richards Website: www.morphyrichards.co.uk

446/8001/91 Rev 1

Morphy Richards Ltd, T albot Road, Mexborough, S64 8AJ

Morphy Richards products are intended for household use only.

Morphy Richards has a policy of continuous improvement in product quality and design.

The company, therefore reserves the right to change the specification of its models at any time.

P.7