Morphy richards 22074 Instructions manual

Helpline

8.30-5.00 Monday-Thursday

8.30-4.00 Friday

UK 0870 060 2614

Republic of Ireland 1800 409119

For details of the rest of the products in the

Morphy Richards range please see our website

www.morphyrichards.com

Registered address:

Morphy Richards Ltd

Talbot Road

Mexborough

South Yorkshire

S64 8AJ

Model Number: 22074

Part Number: PC22074 M UK rev1

Morphy Richards products are intended for

household use only. Morphy Richards has a policy

of continuous improvement in product quality and

Retro Ceramic Straightener Model No. 22074

design. The company therefore reserves the right to

change the specification of its models at any time.

Instructions and Guarantee

2-year Guarantee

It is in your interest to retain the retailer’s

receipt as proof of purchase. Please quote the

model number if the product develops a fault.

This number can be found on the handle of

the product.

All Morphy Richards products are individually tested

before leaving the factory. In the unlikely event of

any appliance proving to be faulty within 28 days

of purchase it should be returned to the place of

purchase for it to be replaced.

If a fault develops after 28 days and within 24

months of original purchase, you should contact

the helpline number quoting the model number

of the product, or write to the address below.

You will be asked to return the product (in secure

packaging) along with a copy of proof of purchase:

The After Sales Division

Morphy Richards Ltd

Mexborough

South Yorkshire

England

S64 8AJ

immerse the appliance in water or any other liquids.

other persons without assistance or supervision, if their

physical, sensory or mental capabilities prevent them from

using it safely. Keep out of reach of children at all times.

while unattended.

straightener corresponds with your house electricity

1 Use this appliance for its intended use only.

2 To protect against the risk of electric shock, do not

3 This appliance is not intended for use by children or

Mains lead.

As a safety precaution and to prolong the life of

4 Always unplug the appliance when it is not in use.

5 Do not leave the appliance switched on

6 Check that the voltage on the rating plate of the

your appliance, do not wrap the mains lead around

the appliance as this can cause damage.

Cleaning your straighteners

Over time, you may find a natural build up on your

straightening plates. This can be caused by natural

oils in your hair and styling products. In order

to avoid this you should clean your straightener

supply which must be AC (alternating current).

the mains cable – return to Morphy Richards.

cooled down.

or other vessels containing water.

very high temperatures. Always be careful not to allow

the plates to come into contact with the skin.

to be damaged by the heat.

7 In the event of cable damage, do not attempt to replace

8 After use, do not store until the product has

9 Do not use this appliance near bathtubs, showers, basins

10 This straightener is professional standard, and reaches

11 Do not place the straightener on surfaces likely

regularly. Always switch your straightener off and

wait for it to cool down. Wipe with a damp cloth,

or a non abrasive cleaning wipe. Failure to do this

may mean the build up becomes burnt onto the

plates and it will become difficult to clean. If your

straightening plates do become discoloured it will

NOT affect its performance.

Safety information

When using your hair straightener, basic safety

precautions should always be followed. Please read

these instructions carefully before using the product

and keep them in a safe place for future reference.

Don’t forget – to switch off your straightener

Your straightener reaches a very hot temperature really

Retro Ceramic Straightener

Using your straightener

and store when you have finished straightening.

quickly, so be careful not to leave your straightener

on surfaces like carpets, which could get damaged.

After washing your hair, it’s really important to prepare

it for styling. If you use lots of heated styling tools on

your hair always use a heat protection spray before you

begin styling. Always dry the excess water from your

hair using a towel, and then use a widetooth comb to

If you want to store your straightener in the gift box,

always make sure your straightener has cooled down.

Wiring

This product is fitted with a 13 amp (BS1363) plug.

A 13 amp fuse (BS1362) must be used.

If the socket outlets in your home are not suitable for

the plug supplied with this appliance, the plug should

be removed and the appropriate one fitted.

WARNING: The plug removed

from the mains lead, if severed,

must be destroyed as a plug with

bared flexible cord is hazardous if

engaged into a live socket outlet.

is turned on. Clamp a section of the hair between the

straightening plates as close to the roots as possible.

Gently slide the straightener down your hair shaft

to the ends. For more difficult sections of hair, you

may need to do this again. Repeat on all sections of

the hair. There is no need to leave the hair between

the plates for longer than a few seconds. This will

Applying high temperatures to damp or wet hair will

increase the probability of hair breaking or becoming

permanently damaged. Divide your hair into sections

and comb each section thoroughly.

Slide the On/Off switch to turn your straightener on.

detangle and smooth your hair.

Use your hair dryer until your hair is thoroughly dry.

The red light will illuminate to show your straightener

avoid unnecessary damage to the hair cuticle.