Morphy richards 22052 Instructions manual

‘Mobile straightener’

Model 22052

Instructions

This product is designed to touch up your hair style once you have
styled your hair with your mains straighteners. This product should
be used when your straightened style needs refreshing.

When you first take this product out of the packaging, it will require
charging from the mains, initially for 8 hours.
After first use it will only take 4 hours to re-charge.

Thank you for buying your new Morphy Richards, Headgear mobile straightener. Please read
these instructions carefully before use and keep in a safe place for future reference.

Note: Your product is supplied with batteries fitted and it will need fully charging before
use. Follow the instructions, ‘Charging by mains power’.

1 The product can be used whilst plugged into the mains.
2 Recharge the product for 4 hours and then unplug it.

Warning: Do not leave the product switched ‘on’ and plugged into the mains
charging unit for extended periods or whilst unattended, as this will cause damage.

Key Features

Charge

indicator light

On/off switch with
automatic shut off

Power on

indicator light

OPEN CLOSED

Includes

Straightener plates

Hold closed over
hair to use

Twist & lock

mechanism

Recharging point with
protective rubber stopper

This top plate is not
heated up directly

Push up to open

• Anodised styling plates to care for your hair and create longer lasting style

• Mains charger

2

Mains charger

About your mobile
straightener

Your mobile straightener has been
designed to touch up your style on the
move, throughout the day.

It can be charged from the mains power.

This product can be used whilst
plugged into the mains adaptor, however
heat up times will vary if the batteries
are flat to start with.

This unit achieves a maximum of 30
minutes use when fully charged and the
battery needs to be fully charged to achieve
this. The charging time is 4 hours.

Using your mobile
straightener

1 Push the centre section of the

straightener upwards to open.

2 Switch on by sliding

the on/off switch to
the on position I.
The power on light

will illuminate.

3

3 Slide the barrel

length back into the outer
casing. The plates need
to be closed whilst they
warm up. This will take
approximately 5 minutes.

4 Slide the barrel upwards

and fully out of the casing
and twist to lock .
Your mobile straightener
is ready to use.

/4 of its

3