Morphy richards 22047 Instructions manual

GUARANTEE INSTRUCTIONS &

Model 22047

STYLING TIPS:

WIDE THERMOCERAMIC STRAIGHTENER

For information on how to create this look and many others, as well as details of the rest of the Morphy Richards/I Create product range please visit our website:

www.morphyrichards.co.uk

HELPLINE:

(8.30-5.00 Mon-Thurs/8.30-4.00 Fri) UK 0870 060 2614 Republic of Ireland 1800 409119

by the tong. This minimises damage to the cuticle. protect your hair from the high temperature reached shiny. The ceramic coating also acts as a barrier to hair reflects light and therefore appears healthy and cuticle lies flat once styled. This ensures that your The ceramic coated plates ensure that the hair

COATING CERAMIC

Morphy Richards’s products are intended for household use only. Morphy Richards has a policy of continuous improvement in product quality and design. The company therefore reserves the right to change the specification of its models at any time.

Registered address: Morphy Richards Ltd, Mexborough, South Yorkshire, S64 8AJ

www.morphyrichards.co.uk

PC22047M UK rev 1 4/4

hair all day. maintained throughout use, to guarantee straight high temperature in seconds. This high heat is then heating element, which ensures it heats up to a very The straightener contains a special thermoceramic

ELEMENT

SECTIONS LIE FLAT ENSURES ‘FLY AWAY’ CERAMIC COATING

SHINE POTENTIAL REDUCES LIGHT AND DAMAGED CUTICLE

WORK?: CERAMIC TECHNOLOGY: HOW DOES THERMO-:

SAFETY INFORMATION:

When using your hair straightener, basic safety precautions should always be followed. Please read these instructions carefully before using the product, and keep them in a safe place for future reference.

his straightener is professional standard, and

1 T

hes very high temperatures.

reac

not to allow the plates to come into contact with the skin.

2 Do not leave the plates in contact with the hair for

more than a few seconds.

ery high temperatures, so there is no need to leave

v the hair between the plates for longer than a few seconds. This will avoid unnecessary damage to the hair cuticle.

3 Use the appliance for its intended use only

4 To protect against the risk of electric shock, do not

The straightener reaches

ays be careful

Alw

immerse the appliance in w liquids.

5 It is recommended that this appliance should not be

used by children.

6 Always unplug your appliance when it is not in use.

7 Do not lea

unattended.

8 Do not take this product into a bathroom, or use

near w

9 In the event of cable damage, do not attempt to

replace the mains cable – return to Morph Richards.

10After use, do not store until the product has cooled

11Do not place the str

be damaged by the heat.

ve the straightener switched on while

ater.

wn.

ater or any other

aightener on surfaces likely to

WIRING:

This product is fitted with a 13A (BS1363) plug. A 3amp fuse (BS1362) must be used. Check the voltage on the rating plate of your appliance corresponds with your house electricity supply w current). If the soc suitable for the plug supplied with this appliance the plug should be remo IMPORTANT: THE PLUG REMOVED FROM THE MAINS

, IF SEVERED MUST BE DESTROYED AS A PLUG

LEAD WITH BARED FLEXIBLE CORD IS HAZARDOUS IF

GED INTO A LIVE SOCKET OUTLET.

ENGA

hich must be AC (Alternating

ket outlets in your home are not

ved and an appropriate one fitted.

MAINS LEAD:

As a safety precaution and to prolong the life of your appliance, do not wrap the mains lead around the appliance as this will cause damage.

CERAMIC COATED

STRAIGHTENING

PLATES

GUARDS

SAFETY

RECESSED FINGER WELLS

INDICATOR

LIGHT

VARIABLE

HEAT

SETTINGS

HOW TO USE YOUR: STRAIGHTENER:

1 Choose either setting I or II dependent on the

temperature you require. The temperature you need will depend on the thickness of your hair and the result you want to achieve. Setting ‘I’ is the lowest, ‘II’ the highest. The red indicator light will illuminate when you select the heat setting required.

2 Once the straightener has reached a temperature

suitable for use, the light will begin to flash. This usually takes less than 1 minute.

! Ensure your hair is thoroughly dry before you

begin styling – this will avoid damage to the hair.

3 Divide your hair into sections, brushing each

section thoroughly.

CLEANING:

It is normal to find build up of hair products on the straightening plates. In order to avoid this you should clean your straightener regularly. Always wait for the plates to cool down thoroughly before cleaning. Use a damp cloth to remove any build up. If this fails to clean the plates, try a non abrasive cleaning wipe e.g. CIF.

2-YEAR GUARANTEE:

4 Clamp a section of the hair between the

straightening plates, as close to the roots as possible. Gently slide the straightener down your hair shaft to the ends. For more difficult sections of hair, you may need to repeat this. Avoid leaving your hair clamped inside the straightener for more than a few seconds, as this could cause unnecessary damage to the cuticle.

6 To create movement in the hair, use your wrist

to shape the ends either inwards our outwards depending on the style you wish to achieve.

7 Repeat on all sections of the hair.

8 Clean your straightener regularly for best results.

Always do this when the straightener is switched off and has cooled down.

any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced.

If a fault develops after 28 days and within 24 months of original purchase, you should contact the helpline number quoting the model number of the product, or write to the address below. You will be asked to return the product (in secure packaging) to the address below along with a copy of proof of purchase:

It is in your interest to retain the retailers receipt as proof of purchase. Please quote the model number if the product develops a fault. This number can be found on the handle of the product.

All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of

The After Sales Division, Morphy Richards Ltd Mexborough South Yorkshire England S64 8AJ