Morphy richards 22042 Instructions manual

Important safeguards

Two Year Guarantee

When using your hair appliance, basic safety precautions should always be followed.

1 Read all instructions carefully. 2 Use the appliance for its intended use only. 3 To protect against the risk of electric shock,

do not immerse the appliance in water or in any other liquids.

4 Be sure that your household voltage

corresponds to the voltage marked on the styler.

5 Always unplug your appliance when it is

not in use.

6 It is recommended that this appliance

should not be used by children.

7 Do not leave the styler switched on

whilst unattended.

8 This appliance is equipped with a swivel

cord which must if damaged, be replaced by a swivel cord of the same type. The cord must be replaced by Morphy Richards as special tools are required.

9 Do not use in a bathroom.

It is in your interest to retain the retailers receipt as proof of purchase. Please quote the model number if the product develops a fault. This number can be found on the handle of the product.

All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced.

If a fault develops after 28 days and within 24 months of original purchase, you should contact the helpline number quoting the model number of the product, or write to the address below. You will be asked to return the product (in secure packaging) to the address below along with a copy of proof of purchase.

The After Sales Division

Registered address

Morphy Richards Ltd

Mexborough

South Yorkshire

England

S64 8AJ

Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK 0870 060 2614 Replacement parts 0870 167 6645 Republic of Ireland 1800 409119

Morphy Richards Website

www.morphyrichards.co.uk

Styling brush

MODEL : 22042

Morphy Richards products are intended for household

use only. Morphy Richards has a policy of continuous

improvement in product quality and design. The

Company, therefore, reserves the right to change the

specification of its models at any time.

PC22042M UK Rev 1

Instructions & style guide

Thank you for buying your new Essentials styling brush from Morphy Richards. Please read these instructions carefully before use and keep in a safe place for future reference.

Key features

Styling tips

Your styling brush is one of the most important beauty aids you own, and the way you use it has a significant impact on the look and condition of your hair.

Having shampooed your hair, ensure that it is rinsed properly as shampoo that is left in the hair will leave it looking dull.

To maximise shine, rinse your hair in cool water when you have rinsed it thoroughly.

Leave for approximately 20-30 seconds (depending on the length and thickness of the section of hair) then unwind carefully.

Repeat on all sections of hair around the head.

Mains lead

As a safety precaution and to prolong the life of your appliance, do not wrap the mains lead around the appliance as this will cause damage.

A Styling brush for creating waves

and adding volume.

B LED power on indicator. C Cool tip for more comfortable styling.

• Ideal for curly and wavy styles.

• Salon length cable.

Comb your hair through with a wide toothed comb to remove tangles before styling.

Dry your hair with a Morphy Richards hairdryer.

Styling

Blow dry the hair, using a Morphy Richards hairdryer, by brushing the hair from the roots to the ends in the direction of normal growth to add body. When dry, brush into the desired shape.

Using the styling brush

Divide your hair into sections, small sections for tighter curls, larger sections for body and curl.

Stroke the heated brush from the roots to the ends of each section of the hair and then rotate the handle to wind the hair around the brush, winding inwards towards the scalp. You may find it easier if you hold the cool tip loosely with the other hand.

Wiring

This product is fitted with a 13A (BS1363) plug. A 3 amp fuse (BS1362) must be used.

Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).

If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted.

IMPORTANT: The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live socket outlet.