3M salon cable &
hanging loop
for flexible use &
convenient storage
USING YOUR HAIR DRYER:
Having shampooed your hair, ensure that it is rinsed thoroughly as
shampoo that is left in the hair will leave it looking dull.
Comb your hair through with a wide-tooth comb to remove tangles
before styling.
Ensure the concentrator nozzle & diffuser (diffuser only with 21036)
attachment are detached.
Move the on/off switch to position to turn the hair dryer on.
Use the three heat and two speed settings to make the dryer
operate faster and hotter, to help remove excess water from your
hair.
As your hair begins to dry, switch off the hair dryer and clip on the
concentrator nozzle or diffuser (diffuser only with 21036) to begin
styling your hair. For a straight style, use the concentrator to direct
air down into the shaft of hair.
SSttrraaiigg hh tt
As you begin to style your hair during drying, move the heat and
speed buttons to select a slower and cooler setting use cool shot to
set the style.
CCuurrllyy
If you want to create volume instead, attach the diffuser (only with
21036) to your hair dryer. Switch off the hair dryer then push the
diffuser onto the end of the hair dryer ensuring it clicks into place.
Collecting hair in the diffuser as you dry will give you a
textured/tousled look or will enhance natural curls.
When your hair is dry, and you have achieved the desired style,
press the cool shot button . This will release a burst of cold
air which will set your style in place. Press the button again to
return to normal styling temperature.
Always remember to switch the on/off button to the position 00, to
turn your hair dryer off.
ALWAYS CLEAN YOUR FILTER
Cleaning the air filter regularly will ensure that only clean air is used
to dry your hair and that the dryer will not overheat and cut out. To
remove the air filter, enure the hair dryer is unplugged from the
mains supply. Hold the body of the dryer firmly while pressing in
the two sides of the filter and pulling it to release. Clean away hair
and lint from the filter. Ensure the filter is completely dry before
refitting. To re-fit, align the filter on the dryer and push back into
place.
WIRING
The product is fitted with a 13A (BS1363) plug. A 13A fuse
(BS1362) must be used. Check the voltage on the rating plate of
your appliance corresponds with your house electricity supply
which must be AC (Alternating Current). If the socket outlets in your
home are not suitable for the plug supplied with this appliance the
plug should be removed and an appropriate one fitted.
IMPORTANT: THE PLUG, REMOVED FROM THE MAINS LEAD,
IF SEVERED, MUST BE DESTROYED AS A PLUG WITH BARED
FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE
SOCKET OUTLET.
MAINS LEAD
As a safety precaution, and to prolong the life of your appliance,
do not wrap the mains lead around the appliance as this can
cause damage.
SAFETY INFORMATION
When using your hair dryer, basic safety precautions
should always be followed. Please read these instructions
carefully before using the product, and keep them in a safe place
for future reference.
Use this appliance for its intended use only.
To protect against the risk of electric shock, do not immerse the
appliance in water or in any other liquids.
Check the voltage on the rating plate of the hair dryer
corresponds with your house electricity supply which must be
AC (Alternating Current).
Always unplug the appliance when it is not in use.
Do not leave the hairdryer switched on whilst unattended.
WARNING (for UK only): Do not use this appliance near
bathrooms, showers, basins or other vessels containing water.
WARNING: (for other European countries) For additional
protection, the installation of a residual current device (RCD)
having rated residual operating current not exceeding 30mA is
advised in the electrical circuit supplying the bathroom. Ask
your installer for advice.
In the event of supply cord/cable damage, do not attempt to
replace mains cable. It should be returned to Morphy Richards
in order too avoid a hazard. When the hair dryer is used in a
bathroom, unplug it after use since the proximity of water
presents a hazard even when the hair dryer is switched off.
This appliance is not intended for use by children or other
persons without assistance or supervision, if their physical,
sensory or mental capabilities prevent them from using it safely.
Keep out of reach of children at all times.
Do not place on surfaces that are likely to be damaged by
heat.
Ensure the filter is cleaned regularly.
Removable air filter
for easy cleaning to
maintain the dryer
performance
3 heat, 2 speed & Cool
shot setting
for versatile settings for all hair
types and styles.
PRODUCT FEATURES:
4
5
6
1
2
3
4
5
6
7
8
9
10
7
8
9
1
2
3
Slim
concentrator nozzle
for controlled and easy
styling
Stylish & Ergonomically
designed
unique to Morphy Richards ensuring
ease of use.
2000w
ensuring the power but a
lightweight balanced
design.
Dimond Ionic
feature
to protect and enrich,
reduce the elasticity
and smooth the hair
to the tip, producing
quicker and kinder
drying to your hair.
Deep bowl diffuser
to creating the ultimate curly
styled finish, perfect for long
hair. (Only with 21036)
10