Morphy richards 21027 Instructions manual

Diffuser Attachment

3 Heat Settings

MODEL21027

DIFFUSERDRYER

Removable Filter

Cool Shot

Ioniser - Ionic flow

2 Speed Settings

prevents frizz and static

USING YOUR HAIR DRYER

After washing your hair, it’s really important to prepare it for styling. If you use lots of heated styling tools on your hair, try to use a heat protection spray before you begin styling. Always dry the excess water from your hair using a towel, then use a wide tooth comb to detangle and smooth your hair

o begin drying, remove the nozzle from your dryer, and blast your hair with the dryer on

T the highest speed setting until your hair is 50% dry – when your hair is almost dry you can begin to style it.

As your hair begins to dry, switch off your dryer and attach the concentrator nozzle. Use the sectioning clips to split the hair into manageable sections – this will ensure that each section is thoroughly dried and styled, as leaving moisture in the hair can cause frizz. Using the nozzle helps to direct the airflow and will give your hair a sleek and smooth finish. If you are blow drying curly hair into a straight style, use the nozzle to direct air down the shaft of the hair. If you want to create volume instead, attach the diffuser to your hair dryer. Collecting hair in the diffuser as you dry will give you a textured/tousled look or will enhance natural curls.

As your hair dries, use the dryer on a slower speed setting so as not to blow your style out of place. When you have achieved the style you want and your hair is thoroughly dry, press and hold the Cool Shot button for a blast of cold air to set your style in place.

For hints and tips on cr

DON’T FORGET – to switch off your hair dryer and store when you have finished drying! If you want to store your hair dryer in the gift box, always make sure the hair dryer has cooled down and never wrap the cable around the product, as this can cause damage

eating funky new styles have a look at the style guide enclosed.

Hanging Loop

2 YEAR GUARANTEE

It is in your interest to retain the retailers’ receipt as proof of purchase. Please quote the model number if the product develops a fault. This number can be found on the handle of the product.

All Morphy Richar unlikely event of any appliance pr returned to the place of purchase to be replaced.

If a fault develops after 28 days and within 24 months of original purchase, you should contact the Helpline number quoting the model number of the product, or write to the address below. You will be asked to return the product (in secure packaging) to the address below along with a copy of proof of purchase.

The After Sales Division, Morphy Richards ltd, Mexborough, South Yorkshire England, S64 8AJ

Helpline (8.30-5.00 Mon-Thurs/8.30-4.00 Fri)

UK 0870 060 2614 • Republic of Ireland 1800409119

For extra tips on styling, and details of the rest of the Products in the Morphy Richards range please see our website

Morphy Richar policy of continuous improvement in product quality and design. The company therefore reserves the right to change the specification of its models at any time.

Registered address:

Morphy Richards Ltd, Mexborough, South Yorkshire, S64 8AJ

ds products are individually tested before leaving the factory. In the

oducts are intended for household use only. Morphy Richards has a

ds pr

oving to be faulty within 28 days of purchase, it should be

.morphyrichar

www

ds.com

ds.

TION

egularly

esponds with your house

dryer corr

eplace the mains cable – r

eturn to

SAFETY INFORMA

When using your hair dryer, you must follow basic safety precautions. Please read these

instructions carefully before using the product and keep them in a safe place for future

reference.

01 Use this appliance for its intended use only.

02 To protect against the risk of electric shock, do not immerse the appliance in water or

in any other liquids.

03 Check the voltage on the rating plate of the hair

electricity supply which must be AC (alternating current.)

04 Always unplug the appliance when it is not in use.

05 Do not leave the hair dryer switched on whilst unattended

06 Do not take this product into a bathroom or use near water.

07 In the event of cable damage, do not attempt to r

Morphy Richar

08 It is recommended that the product should not be used by children

09 Do not place on surfaces that are likely to be damaged by heat.

10 Ensur

e the filter is cleaned r

CLEANING THE FILTER

To remove the filter, make sure your hairdryer is unplugged from the mains supply and twist

o do this, hold the body of the dryer firmly and twist the cover to r

. T

ear cover

the r

. Clean the filter, removing any hair and lint using a vacuum cleaner. Ensure the filter

air filter

is completely dry before re fitting. To refit, twist the cover back into place.

eveal the

WIRING

oduct is fitted with a 13A (BS1363) plug. A 13 Amp fuse (BS1362) must be used. If the

This pr

socket outlets in your home are not suitable for this appliance, the plug should be removed and

the appropriate one fitted. In the event of cable damage, do not attempt to replace the mains

cable return to Morphy Richards.

WARNING: The plug removed from the mains lead, if severed, must be destroyed. A plug

with bared flexible cord is hazardous if engaged into a live socket outlet.

MAINS LEAD

As a safety pr

ound the appliance as this will cause damage.

ecaution and to pr

olong the life of your appliance, do not wrap the mains lead

Part Number

PC21027M UK r

ev 1