Morphy richards 21025 Instructions manual
Wiring
Two Year Guarantee
This product is fitted with a 13A (BS1363) plug.
A 13 amp fuse (BS1362) must be used.
Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not suitable for
the plug supplied with this appliance the plug should be
removed and the appropriate one fitted.
WARNING: The plug removed from the
mains lead, if severed, must be
destroyed as a plug with bared flexible
cord is hazardous if engaged into a live
socket outlet.
Mains Lead
As a safety precaution and to prolong the life of your
appliance, do not wrap the mains lead around the
appliance as this will cause damage.
It is in your interest to retain the retailers receipt as
proof of purchase. Please quote the model number
if the product develops a fault. This number can be
found on the handle of the product.
All Morphy Richards products are individually tested
before leaving the factory. In the unlikely event of
any appliance proving to be faulty within 28 days of
purchase it should be returned to the place of
purchase for it to be replaced.
If a fault develops after 28 days and within 24 months
of original purchase, you should contact the helpline
number quoting the model number of the product,
or write to the address below. You will be asked to
return the product (in secure packaging) to the
address below along with a copy of proof of
purchase.
The After Sales Division
Registered address
Morphy Richards Ltd
Mexborough
South Yorkshire
England
S64 8AJ
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri)
UK 0870 060 2614
Replacement parts 0870 167 6645,
Republic of Ireland 1800 409119
Morphy Richards Website
www.morphyrichards.co.uk
1200w Compact hairdryer
with concentrator nozzle
MODEL : 21025
Morphy Richards products are intended for household
use only. Morphy Richards has a policy of continuous
improvement in product quality and design. The
Company, therefore, reserves the right to change the
specification of its models at any time.
PC21025M UK Rev 1
Instructions & Style Guide
Thank you for buying your new 1200w Essentials
hairdryer from Morphy Richards. Please read these
instructions carefully before use and keep in a safe
place for future reference.
Key Features
B
A 2 heat/speed settings for fast controlled drying.
B Concentrator nozzle for accurate styling.
C Dual voltage for the regular traveller.
- 230v UK/Europe
- 120v USA
D Air inlet grille
D
A
C
Styling
Towel dry your hair before using your hairdryer.
Set the dryer on the highest setting/speed and
circulate airflow through the hair, trying not to
concentrate the airflow on any one section of hair for
a long period of time.
As soon as the hair is almost dry, lower the speed
setting and use a styling brush to shape the hair as
desired.
Styling tips
Having shampooed your hair, ensure that it is rinsed
properly as shampoo that is left in the hair will leave it
looking dull.
To maximise shine, rinse your hair in cool water when
you have rinsed it thoroughly, comb your hair through
with a wide toothed comb to remove tangles before
styling.
When drying your hair straight, make sure each
section is completely dry before moving onto the next
or your hair will kink or frizz.
The concentrator attachment allows you to direct heat
for smooth styling.
Important safeguards
When using your hair appliance, basic safety
precautions should always be followed.
1 Read all instructions carefully.
2 Use the appliance for its intended use only.
3 To protect against the risk of electric shock, do
not immerse the appliance in water or in any
other liquids.
4 Be sure that your household voltage corresponds
to the voltage marked on the dryer.
5 The air inlet grille should not be obstructed
when the hairdryer is in use.
6 Always unplug your appliance when it is not
in use.
7 It is recommended that this appliance should
not be used by children.
8 Do not leave the hairdryer switched on whilst
unattended.
9 Do not use in a bathroom.
Dual voltage switch
Use a coin or screwdriver and rotate the dual voltage
switch to either the 230v UK or 120v USA.
Never use on 120v setting when
connected to 230v supply.
Loading...