Morphy richards 21002 Instructions manual

Wiring

Two year guarantee

This product is fitted with a 13A (BS1363) plug. A 13 amp fuse (BS1362) must be used.

Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).

If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted.

IMPORTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET.

Mains lead

As a safety precaution and to prolong the life of your appliance, do not wrap the mains lead around the appliance as this will cause damage.

It is in your interest to retain the retailers receipt as proof of purchase. Please quote the model number if the product develops a fault. This number can be found on the handle of the product.

All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced.

If a fault develops after 28 days and within 24 months of original purchase, you should contact the helpline number quoting the model number of the product, or write to the address below. You will be asked to return the product (in secure packaging) to the address below along with a copy of proof of purchase.

The After Sales Division

Morphy Richards Ltd

Mexborough

South Yorkshire

England S64 8AJ

Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK (local rate) 08450 777700, Republic of Ireland 1800 409119

Folding travel hairdryer

MODEL : 21002

Morphy Richards products are intended for household

use only. Morphy Richards has a policy of continuous

improvement in product quality and design. The

Company, therefore, reserves the right to change the

specification of its models at any time.

446-8001-02 Rev OI

CP 08.00

Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ

Instructions & Style Guide

Thank you for buying your new travel hairdryer from Morphy Richards. Please read these instructions carefully before use and keep in a safe place for future reference.

Key features

A 2 heat/speed settings. B Air filter C Folding handle D Dual voltage for the regular traveller

- 230v UK/Europe

- 120v USA

Styling tips

Your hairdryer is one of the most important beauty aids you own, and the way you use it has a significant impact on the look and condition of your hair.

Having shampooed your hair, ensure that it is rinsed properly as shampoo that is left in the hair will leave it looking dull.

To maximise shine, rinse your hair in cool water when you have rinsed it thoroughly.

Comb your hair through with a wide toothed comb to remove tangles before styling.

When drying your hair smooth, make sure each section is completely dry before moving onto the next or your hair will kink or frizz.

Styling

Towel dry hair before using the hairdryer.

For drying

Unfold the handle of your travel hairdryer. Set the dryer on the highest setting/speed and circulate airflow through the hair, trying not to concentrate the airflow on any one section of hair for a long period of time.

As soon as the hair is almost dry, lower the speed setting and use a styling brush to shape the hair as desired.

Important safeguards

When using your hair appliance, basic safety precautions should always be followed.

1 Read all instructions carefully. 2 Use the appliance for its intended use only. 3 To protect against the risk of electric shock, do not

immerse the appliance in water or in any other liquids.

4 Be sure that your household voltage corresponds

to the voltage marked on the dryer.

5 The air inlet grille should not be obstructed

when the hairdryer is in use.

6 Always unplug your appliance when it is not

in use.

7 It is recommended that this appliance should

not be used by children.

8 Do not leave the hairdryer switched on whilst

unattended.

9 When the hairdryer is used in a bathroom, unplug

it after use since the proximity of water presents a hazard. For additional protection the installation of a residual current devise (RCD) with a rated residual operating current not exceeding 30 ma is advisable in the electrical circuit supplying the bathroom.

Dual voltage

Use a coin or a screw driver and rotate the dual voltage switch to either the 240v UK or 120v USA.