OCTAVE Signature SERIES SPECIFICATIONS
OCTAVE SIGNATURE BOOKSHELF SUBWOOFER CENTRE
Type
Construction
Acoustical Loading
Drive Units
2-way freestanding loudspeaker
MDF polymer-coated cabinet with separate
chamber for each drive unit.
Double port bass reflex
Woofer: 5¼"(130mm) rear-vented system.
Double ferrite magnet motor. One piece
integrated dome and surround cone, made
of damped polymer composite. 3" (75mm )
aluminum Hexatech™ voice coil and Morel's
external voice coil technology (EVC).
Tweeter: Mid/high frequency unit, low
resonance soft dome, Acuflex™ coated, vented
double magnet neodymium motor.
Aluminum Hexatech™voice coil and Morel's
External Voice Coil technology (EVC).
All units are shielded with low magnetic stray field
11/8" (28mm)
Isobaric and port-loading reflex cabinet
Two 9" (222mm) flat-profile woofers with 3" (75
mm) Hexatech™ aluminum coil and rear-vented
Hybrid (neodymium and ferrite)
double magnet motor
3 Way 4 units, full range centre speaker with low
magnetic stray field
MDF polymer-coated cabinet with 3 separate
acoustic chambers. Separate chamber for each
drive unit.
Double port bass reflex for bass chamber/sealed
for bass midrange & tweeter
Woofer: 2 x 5¼" (130mm) rear vented. Double
magnet motor.
Midrange: 1 x 5¼" (130mm) rear vented hybrid
motor. Both feature one piece integrated dome
and surround cone, made of damped polymer
composite. 3" (75 mm) aluminum Hexatech™ voice
coil using Morel's external voice coil technology
(EVC).
Tweeter: Mid/high frequency unit, low resonance
soft dome, Acuflex™ coated, vented double
magnet neodymium motor. 1
Hexatech™ and Morel’s External Voice Coil
technology (EVC).
All units are shielded with low magnetic stray field
1
/8" (28mm) aluminum
Frequency Response
Crossover
Nominal Impedance
Nominal Impedance for full floorstanding system
Nominal Impedance for
bi-amp configuration system
Nominal Power Handling
Peak Power Handling
Sensitivity 2.38V/1M 86 dB 88 dB
Dispersion
Dimension (WxHxD)
Net Weight 15.4 lbs (7 kgs) each Octave unit 37.4 lbs (17 Kg) 36 lbs (16 Kg)
Finishe
* Morel operates a policy of continuous products design improvement, consequently specifications are subject to alteration without prior notice.
20-30,000Hz (40-18,000Hz ± 1.5 dB) 20-100Hz 20-22,000 Hz
2200 Hz / 12 dB octave
4 ohm 4 ohm
120W RMS
1,000W 10m/sec
Within 1.5 dB - 18,000 Hz
Horizontal: over 60°
Vertical: over 20°
7" x 12½" x 12¾" (175mm x 315mm x 325 mm) 7" x 27" x 12¾" (175mm x 700mm x 325mm)
Black, white,red Black, white,red Black, white,red
4 ohm
4 ohm
2 ohm
www.morelhifi.com
2200 Hz / 12 dB octave
300W RMS
1000W 10m/sec
Within 1.5 dB - 18,000 Hz
Horizontal: over 60°
Vertical: over 20°
21¾" x 9¾" x 12¾" (550mm x 247mm x 325 mm)
Loading...