MORECEVSE Wallbox Overview User manual

Wallbox Overview

Accessories of Mode C

Mode C Station Overview

Display Screen

LED

HOLDERPLATE STATION

SCREWS FOR HOLDER

30mm PLASTIC BOLTS

ALLEN KEY

REFERENCE PAPER

30mm SCREWS

HOOK

On/Off

Charging Plug

Technical Parameters

Level 2 EV Charging Station

Installaon Method: Wall/Stand
Mode: C(with plug)
Cerficate: TUV,CE
IP Rang: IP66
Rated Voltage: 230VAC±10%
Rated Current: 16A
Maximum Power: 11kw
Phase Mode: Three Phase

Operang Temperature: -40℃～55℃

Enclosure Material: ABS+PC alloy
Start Mode: Buon(default)

Instruction for Use

1 2

Distribution Box

Wall

Security Protecon:
Warning and display funcons
Open circuit protecon
Output overcurrent protecon
Input under voltage protecon
Over temperature protecon
Ground protecon
Input overvoltage protecon
Charge status detecon

Charging Station

Button
Holder

Charging Plug
Hook

Make sure the wallbox is connected to power

◆Hang the cable on the hook when it is not in use

Connect the EV and the wallbox
with the EV charging cable

3

Press the buon on the right side

of the wallbox to start/stop charging

Installation Guide

REFERENCE PAPER

of installing screw hole size

Wall

Drill the holes

according to the

REFERENCE PAPER

Fix the PLATE

with 30mm SCREWS

on the wall

Hammer the

30mm PLASTIC BOLTS

into the holes

Take down the

REFERENCE PAPER

from the wall later

Embed STATION into

PLATE on the wall

This is the final completion pic,

you can put the HOOK

and HOLDER

anywhere you need

The cable can

be hung on the

HOOK and HOLDER

Tear off the protector

Wallbox Overview

Accessories of Mode A

HOOK

Display Screen

SOCKETPLATE STATION

30mm PLASTIC BOLTS

SCREW SHIM

ALLEN KEY

REFERENCE PAPER

Mode A Station Overview

LED

On/Off

30mm SCREWS

30mm METAL BOLTS

95mm SCREWS

Socket

Technical Parameters

Level 2 EV Charging Station

Installaon Method: Wall/Stand
Mode: A(with socket)
Cerficate: TUV,CE
IP Rang: IP66
Rated Voltage: 230VAC±10%
Rated Current: 16A
Maximum Power: 11kw
Phase Mode: Three Phase

Operang Temperature: -40℃to+55℃

Enclosure Material: ABS+PC alloy
Start Mode: Buon(default)

Instruction for Use

Distribution Box

Wall

Charging Station
Button

Hook
Charging Plug

Security Protecon:
Warning and display funcons
Open circuit protecon
Output overcurrent protecon
Input under voltage protecon
Over temperature protecon
Ground protecon
Input overvoltage protecon
Charge status detecon

Make sure the walbox is connected to power

Press the buon on the right side of the wallbox

to start/stop charging

◆Hang the cable on the hook when it is not in use

Insert the plug into socket

Connect the EV and the wallbox
with the EV charging cable

Installation Guide

REFERENCE PAPER

of installing screw hole size

Wall

Drill the holes according to

the REFERENCE PAPER

Fix the PLATE with

30mm SCREWS on the wall

30mm PLASTIC BOLTS

Hammer the

into the holes

Hammer the

30mm METAL BOLTS

into the holes

Take down the

REFERENCE PAPER

from the wall later

Embed STATION

into PLATE on the wall

Take out the plate from

the body of charging

SOCKET

Connect the inlet cable and

the power supply correctly

This is the final completion pic,

you can put the HOOK

anywhere you need

The cable can be hung on the

HOOK

Fix the SOCKET on the wall

with95mm SCREWS

and put the plate back to the

by ALLEN KEY

body of SOCKET

95mm SCREWS

Tear off the protector

Screw Shim

Illustration of Screen and LED

Start-up screen

(the version no. is for reference only)

Wait for the car to be ready

Wait for inserng the plug

During charging process

1.Real-me power

2.Three Live Wire data

3.Charging me

4.Power consumpon

5.Charging icon

6.PCB Temperature

Possible
fault warning

Wait for idenficaon

Stop charging and wait for

pulling out the plug

1.Emergency stop

2.Over Current

3.Over Temperature

4.Leakage protecon

5.Short Current

IDLE CONNECTED CHARGING FINISHED ERROR

Instrucon

of LED Status

OFF

Note: When small problems like short current occur, the wallbox will automacally restart to

repair and connue charging.
For serious failures, the system can not automacally recover, in order to remind the user of

this failure, aer the user pulls the plug, the system will automacally countdown 10 seconds to

restart

Connuous

light

Rolling

Connuous

light

Red

flashing

Security Warning

Failure to follow instrucons may result in danger!

▲Regularly check whether the charging staon has visible damage. There may be a electric

shock when operang the broken charging staon.

▲Make sure that all safety facilies are available at all mes and are tested regularly to

ensure they can operate normally.

▲If a ground fault occurs, it must be assumed that the cable carries voltage. Please confirm

that there’s no high-voltage power in the system before inspecng the charging staon.

▲Persons who install and use charging staons must obey the principles and regulaons

menoned to ensure the personal safety and equipment safety.

▲Before powering on the device, please confirm that the device is properly grounded to

avoid unnecessary accidents.

▲All tools’ unnecessarily exposed metal parts should be insulated to prevent them from

touching the metal frame to avoid short circuit.

▲Do not modify, retrofit, or change any part by yourself under any circumstances.

▲To ensure the service life and stable operaon of the charging staon, the operang

environment should be kept as clean as possible with a relavely stable temperature and
humidity. The charging staon must not be used in flammable environment or environments
with volale gas.

▲Be sure to confirm that the input voltage, frequency, circuit breakers and other condions of

the device meet the specificaons before the device is powered on.

Maintenance & Overhaul

In order to ensure the normal service life of the charging staon and reduce risk, maintenance
must be performed within the specified me. The maintenance of the equipment must be
completed by professionals with qualifed and safe maintenance tools.

The product is already packed in factory. During transportaon, strong impact and bumps should
be avoided to avoid damage to the outer packaging of the product.

The product should be placed at an ambient temperature of -40 ℃

humidity of no more than 95%. The air should not contain acids, alkalis ot other corrosive gases
and explosive gases.

AC charging staons are subject to stringent quality inspecons. Mode 2 Charging is subject to
stringent quality inspecons. From the day of purchase, any problem of product quality can be
reflected to the dealer within two years.

Any direct damage or malfuncon caused by neglect, incorrect use, installaon, usage, repair by
the users or natural damage are not covered by the warranty.

(Please do not contact the manufacturer's phone for after-sales questions)

No.128,Aoti,Jianye District, Nanjing, Jiangsu, China

～55℃ with a relave

MANUFACTURER

Nanjing LuAo international tradeCo.,Ltd.

[phone]

Wallbox-Übersicht

Zubehör für Modus C

Modus C Station Übersicht

Anzeigebildschirm

LED

HALTERPLATTE STATION

SCHRAUBEN FÜR HALTER

ALLEN KEY

REFERENZPAPIER

30MM KUNSTSTOFFBOLZEN

HAKEN30MM SCHRAUBEN

An / Aus

Ladestecker

Spezifikation

Ladestation für Stufe 2 EV

Installaonsmethode: Wand / Pol
Modus: C (mit Stecker)
Zerfikat: TÜV, CE
IP66
Spannungsbereich: 230V ± 10%
Betriebsstrom: 16Amp
Maximale Leistung: 11KW
Phasenmodus: Einzelphase

Betriebstemperatur: -40°C～ 55°C

Schalenmaterial: ABS+PC Legierung
Startmodus: Schalläche

(Standardeinstellung)

Bedienungsanleitung

1 2

Verteilerkasten

Wand

Sicherheitsschutz:
Warn- und Anzeigefunkonen
Kurzschlussschutz
Schutz für Ausgangsüberstrom
Eingang unter Spannungsschutz
Übertemperaturschutz
Bodenschutz
Schutz für Eingangsüberspannung
Erkennung des Ladezustandes

LADESTATION

Taste
Halter

Ladestecker
Haken

Stellen Sie sicher, dass die Wallbox an die Stromversorgung

angeschlossen ist

Verbinden Sie den EV und die
Wallbox mit dem EV-Ladekabel

3

Drücken Sie die Taste auf der
rechten Seite der Wallbox,
um den Ladevorgang zu starten
oder zu stoppen

◆ Hängen Sie das Kabel an den Haken, wenn es nicht verwendet wird

Installationsanleitung

REFERENZPAPIER

für die Größe der

Befestigungsbohrung

Die Wand

Bohren Sie die
Löcher gemäß dem
REFERENZPAPIER

Befestigen Sie die

PLATTE

mit 30mm SCREWS

an der Wand

30mm KUNSTSTOFFBOLZEN

Mit STATION in die

Hämmern Sie die

in die Löcher

Nehmen Sie das

REFERENZPAPIER

von der Wand ab

an der Wand einbetten

PLATTE

Dies ist das letzte fertige Bild,

Sie können den Haken

und den Halter

an jedem beliebigen

Ort installieren

Das Kabel kann am

HAKEN und HALTER

aufgehängt werden

Entfernen Sie den

Schutzfilm

Wallbox-Übersicht

Accessories of Mode A

HAKEN

Modus A Station Übersicht

Anzeigebildschirm

LED

STECKDOSEPLATE STATION

30MM KUNSTSTOFFBOLZEN

SCHRAUBE SHIM

ALLEN KEY

REFERENZPAPIER

30MM SCHRAUBEN

30MM METALLSCHRAUBEN

95MM SCHRAUBEN

An / Aus

Steckdose

Spezifikation

Ladestation für Stufe 2 EV

Installaonsmethode: Wand / Pol
Modus: A (mit Sockel)
Zerfikat: TÜV, CE
IP66
Spannungsbereich: 230V ± 10%
Betriebsstrom: 16Amp
Maximale Leistung: 11 KW
Phasenmodus: Einzelphase
Betriebstemperatur: -40°C ~+ 55°C
Schalenmaterial: ABS+PC Legierung
Startmodus: Schalläche

(Standardeinstellung)

Bedienungsanleitung

Distribution Box

Wand

Ladestation
Taste

Halter
Steckdose

Sicherheitsschutz:
Warn- und Anzeigefunkonen
Kurzschlussschutz
Schutz für Ausgangsüberstrom
Eingang unter Spannungsschutz
Übertemperaturschutz
Bodenschutz
Schutz für Eingangsüberspannung
Erkennung des Ladezustandes

Stellen Sie sicher, dass die Wallbox an die
Stromversorgung angeschlossen ist

Drücken Sie die Taste auf der rechten Seite der
Wallbox, um den Ladevorgang zu starten oder zu stoppen

◆ Hängen Sie das Kabel an den Haken, wenn es nicht verwendet wird

Stecken Sie den Stecker in die Steckdose

Verbinden Sie den EV und die Wallbox
mit dem EV-Ladekabel