mophie MPSGRGD-AIR55500 Operating Instruction
powerstation® go rugged
with air compressor
OPERATING INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Warning
DANGER-CAUTION Read and understand all safety information before using this product. Failure
to follow these instructions may result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
NWhen used correctly, lithium- ion rechargeable batteries provide a safe and dependable source of portable
power. However, if they are misused or abused, this may result in leakage, burns, re or explosion, causing
personal injury or damage to other devices.
NMisusing or incorrectly connecting your powerstation go rugged with air compressor may cause electric
shock to users and damage equipment.
NDo not operate in explosive atmospheres such as in the presence of ammable liquids, gases or dust.
NRemove jump start clamps from vehicle battery after jump starting vehicle.
NKeep your powerstation go rugged with air compressor dry and away from moisture and corrosive
materials. The powerstation go rugged with air compressor should not be used near water or wet areas
such as bathtubs, showers, bathrooms, sinks, swimming pools or basements.
NDo not expose your powerstation go rugged with air compressor to moisture, water, rain, or snow.
NKeep your powerstation go rugged with air compressor away from heat sources, including open ames,
radiators, stoves, ovens, and any other devices that product heat.
NThe lithium-ion rechargeable battery used in this charging device may present a risk of re or chemical
burn if mistreated. Do not expose to re or excessive temperature. Do not expose to heat above 212°F
(100°C) or incinerate.
NIn the unlikely event of leakage or explosion use sand or a chemical re extinguisher.
NYour powerstation go rugged with air compressor may become warm under extended high power
operation. Do not cover, wrap, or otherwise restrict the powerstation go rugged with air compressor
during operation.
NDo not disassemble your powerstation go rugged with air compressor. There are no user-serviceable parts
inside. Incorrect reassembly may result in shock or re hazard.
NDo not drop or subject to strong impacts. Do not operate your powerstation go rugged with air compressor
if it has received a sharp blow, or has otherwise been damaged in any way.
NDo not puncture, crush or subject to mechanical shock.
NOnly charge your powerstation go rugged with air compressor by the specied method with the specied
charging adapter provided with the unit.
NDo not use any non-mophie-branded accessories with the powerstation go rugged with air compressor.
Doing so may cause electric shock to users and damage equipment.
NThe powerstation go rugged with air compressor, along with its accessories, are not toys and should be
kept away from children.
NMake sure the jumper cables are fully plugged into the jump start output before trying to jumpstart
your vehicle.
NDo not touch red (positive) and black (negative) jumper clamps together at any point.
NDo not insert any foreign object into the ports or openings of your powerstation go rugged with
air compressor.
NDo not clean your powerstation go rugged with air compressor with harsh chemicals, soaps or detergents.
Just wipe the case with a soft cloth.
NMake sure the powerstation go rugged with air compressor’s charging ports do not become
contaminated with lint or other debris. Use a canned-air type of product periodically to ensure that the
port openings are clear.
NWhen using the air compressor, always check and follow the manufacturer’s recommended pressure. Use
caution as the air hose and connectors may get hot after extended use.
NBatteries should be recycled or disposed of as per state and local guidelines.
NStorage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F (-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)
SAVE THESE INSTRUCTIONS
Charging your powerstation go rugged with air compressor
IMPORTANT: Before using the powerstation go rugged with air compressor for the rst time, fully charge it (so
that pressing any button lights up all four LEDs on the LED Battery Indicators).
To charge your powerstation go rugged with air compressor, use the provided wall charging adapter, and the
provided USB Type-C cable. Next, connect the AC adapter into a wall outlet. The powerstation go rugged with
air compressor will automatically begin charging. When the powerstation go rugged with air compressor is
fully charged, all battery indicator lights will be solid white and the digital screen will indicate 100% charge.
(This could take up to 9 hours). When fully charged, disconnect the cable.
NOTE:
• The powerstation go rugged with air compressor is designed to charge between 32°F-113°F (0-45° C).
A “TEMP” indicator will be illustrated on the digital display if the powerstation go rugged with air
compressor is attempted to be charged outside of this temperature range.
Figure 1
Jump starting a vehicle
1. Plug the jumper cables into the jump-start output on the powerstation go rugged with air compressor.
NOTE: Make sure the jumper cables are fully plugged into the jump-start output before trying to jump
start your vehicle.
Figure 2
2. Attach the jumper cable clamps to the vehicle battery.
• Red clamp on positive terminal (+)
• Black clamp on negative terminal (-)
NOTE:
• Once the jumper cable clamps are attached to the vehicle battery, the LCD will display the vehicle
battery voltage.
• Do not touch red (positive) and black (negative) clamps together at any point. If the jump start button
ashes red, the jumper cables have been connected incorrectly. If this ashing red condition occurs,
disconnect the jumper cables from vehicle battery and restart the process from Step 1.
Figure 3
Loading...