Mophie Juice Pack User Manual

juice pack

Made for Palm

USER MANUAL

®

Welcome

Thank you for purchasing the mophie juice pack
battery case for Palm. Your juice pack case gives your
phone high-impact protection and enough power
to go all day without your needing to nd a power
outlet. With wireless charging, recharging your
juice pack case and phone couldn’t be any quicker
or easier — simply place the juice pack case on just
about any wireless charging base to immediately
begin recharging your phone and case together.

Package contains

• mophie juice pack battery case for Palm

• Quick-start guide

Features

Here are just some of the reasons why your
juice pack case is so great:

• Wireless charging—you can simply place the
juice pack case on a wireless charging base to
immediately begin recharging the phone and
case together.

• (Take a breath) Ergonomic, form-tting, fully
protective impact-resistant case-and-battery­in-one for Palm.

• High-impact protection: Built to protect your
phone against drops and hard falls.

2

• A 3-second press of the status button lets
you charge your phone whenever it needs it.
However, even in standby mode your phone
still has high-impact protection.

• Priority+® charging provides power to your phone
rst before the juice pack case starts to recharge.

• Track battery power at a glance with the
integrated four-light LED status indicator. You
can keep tabs on charging status and current
battery life. Know before you go!

• Built in short-circuit, over-charge, and
temperature protection, so you can charge
with condence. Safety rst!

Compatibility

• The mophie juice pack battery case for Palm

is designed and intended solely for the Palm
smartphone. Please do not attempt to use it
with any other device.

• The mophie juice pack battery case will charge
wirelessly from any mophie wireless charging
base (not included) or from any Qi-compatible
wireless charger, including those used at coee
houses, on airline ights, in furniture products
with wireless charging, and in consumer
vehicles that support wireless charging.

3

Installing your juice pack case

1. Separate the juice pack case sections.

2. Slide your phone all the way into the bottom
section of the juice pack case so that the case’s
USB-C connector is fully inserted into the
phone’s USB-C port.

3. Slide the top section of the juice pack
case all the way over the exposed top of the
phone so that it snaps into the bottom section
of the case.

1 2

3

4

Charging your phone using your juice pack case

IMPORTANT: Before using your juice pack case for
the rst time, fully charge it (so that pressing the
charge status button lights all 4 LEDs).

To begin charging your phone, press the status
button for 3 seconds. The status LEDs will ash in
sequence away from the status button 3 times,
indicating that the juice pack battery has begun
charging the phone.

If you want to stop charging your phone and save
some battery for later, just press the status button
again for 3 seconds. The status LEDs will ash
in sequence towards the status button 3 times,
indicating that the juice pack battery has stopped
charging the phone.

5

Charging your juice pack case (wireless)

Your juice pack case will charge wirelessly from
any mophie wireless charging base (not included)
and from all Qi-compatible wireless charging
bases, including those used at coee houses, on
airline ights, in furniture products with wireless
charging, and in consumer vehicles that support
wireless charging.

1. If you’re using a mophie wireless charging base
(not included), connect its AC wall adapter to
the charging base and to a wall outlet.

2. Place the juice pack case on the wireless
charging base or other charger.

• Make sure the case centered on the

charger vertically and horizontally.

3. Charging will begin on contact. Priority+
pass-through charging provides power to the
installed phone rst, before the juice pack
battery starts to recharge.

6