MOOSE SUB8, SUB8A Man186_0-SUB8_SUB8A.pdf

www.moosesound.com

PROUDLY DEVELOPED AND

MANUFACTURED IN PORTUGAL

SUB8 & SUB8A

Installation subwoofers

MAN186_0

USER’S MANUAL

SUB8 & SUB8A

Installation subwoofers

Introduction

Dear customer,

Thank for choosing MOOSE branded products!

MOOSE is a brand of professional audio & lighting products, proudly developed and manufactured in
PORTUGAL.

In order to operate this product in a safe and reliable manner, please follow the instructions in this booklet and
before operating the equipment read the instructions carefully and please note the technical information.

Our products undergo very rigorous testing under strict conditions and they are monitored continuosly during the
manufacturing process. In order to guarantee the product function and safety, the original parts of the
manufacturer's design must be used. If any parts other than those of the manufacturer are used, or the product is
modified in any way, the user forfeits all warranty rights to claim.

Caution

1. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match

the values specified on the equipment.

2. If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet
with a protective ground. Never deactivate the protective ground of a power cord.

3. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before
extended periods of disuse.

4. Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service company.

5. Do not open or modify this equipment.

6. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping

hazards.

7. Do not turn on the Amplifier ON before checking that all volumes to zero .

IMPORTANT: Never remove the cover, because otherwise there may be a risk of electric shock. There are no user

serviceable parts inside. Have repairs carried out only by qualified service personnel.

The lightnin g flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk o f
electrical shock.

The exclamation mark within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions.

RIS K OF EL ECTRI C SH OCK. DO NOT OP EN.

CAUTION

The amplifie r is marked with this instruction so please
proceed accordingly in order to avoid any hazard.

To pr event e lec tr ic al sh oc k do not rem ove
the cov er. No us er se r vi cea bl e p ar ts in si de .

Refer ser vice to qu al ified personnel only.

www.moosesound.com 2

MAN186_0

SUB8 & SUB8A

Installation subwoofers

Manufacturers Declaration

PROPER DISPOSAL OF THIS PRODUCT

(Valid in the European Union and other European countries with waste separation)

This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.

Household users should contact either the retailer where they purchased this product, or their local government
office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal .

ENVIRONMENTAL PROTECTION AND ENERGY CONSERVATION

Energy conservation is an active contribution to environmental protection. Please turn off all unneeded electrical
devices. To prevent unneeded devices from consuming power in standby mode, disconnect the mains plug.

EC DECLARATION OF CONFORMITY

The equipment marketed by MOOSE complies (where applicable) with the essential requirements and other
relevant specifications of Directives 1999/5/EC (R&TTE), 2004/108/EC (EMC) und 2006/95/EC (LVD). Additional
information can be requested to [e-mail].

PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL

www.moosesound.com 3

MAN186_0

Connections and Controls

Please refer to the following scheme and instructions:

SUB8 & SUB8A

Installation subwoofers

0º 180º

SUB PHASE SUB X-OVERSUB LEVEL

Com

LINE INPUT

100V

LINE INPUT

100V

Com

2

HIGH IMP. INPUT

8

140HZ10

70HZ0

4

Com

8

9

INPUT

1

8

9

7

6

3

5

4

3

1

2

5

www.moosesound.com

PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL

POWER

ON

SUB 8A

INSTALLATION
SUBWOOFER

Active PA subwoofer

Variable X-over frequency

From 70Hz to 140Hz

CAUTION

RISK OF ELECT RIC SHOC K. DO NOT OPEN .

To preve nt elec trica l shock do no t remo ve
the cove r. No us er ser vicea ble par ts ins ide.
Refer ser vice to q ualifi ed person nel only.

MAINS

230V AC

FUSE F 4A

50HZ
70VA

www.moosesound.com

SUB 8

INSTALLATION
SUBWOOFER

Passive PA subwoofer

100V Line input

8Ohm high impedance input

PROUDLY DEVELOPED AND

MANUFACTURED IN PORTUGAL

6 7

1. INPUT: Balanced signal input socket (XLR 3p) for connection of an external audio signal source (e.g., mixer).

2. LINE INPUT: 100V Line input that can be picked from an existing 100V installation.

3. VOLUME: Main volume adjustment. Sets the relative volume of the stage monitor.

4. SUB X-OVER: X-over frequency adjustment from 70Hz to 140Hz.

5. SUB PHASE: Phase inverter switch 0° or 180°.

6. POWER ON: Illuminated on/off switch. Before switching the system on or off, always adjust the volume to

zero.

7. MAINS IN: Power socket with fuse holder, AC 230V - 50~60Hz. Replace the fuse only with a fuse of the same
type and rating. If the fuse blows repeatedly, please contact an authorised service company.

8. LINE INPUT: 100V Line input. It can be used depending on the output type from amplifier in use.

9. HIGH IMPEDANCE INPUT: Line input in 8Ohm. It can be used depending on the output type from amplifier in

use.

www.moosesound.com 4

MAN186_0

Technical specifications

MODE L SUB8 SUB8 A

TYPE Compact passive subwoofer Compact passive subwoofer

ENCLOSURE DESIGN Bass reflex cabinet Bass reflex cabinet

POWER OUTPUT (RMS) 200W 200W

FREQUENCY RANGE 40Hz - 180Hz 40Hz - 180Hz

NOMINAL IMPEDANCE 8Ohm 8Ohm

TRANSDUCER TYPE 1x 8" LF 1x 8" LF

DISPERSION N/A N/A

CROSSOVER FREQUENCY Variabel 70Hz-140Hz Variabel 70Hz-140Hz

MAX. S.P.L. (PEAK) 92dB @ 1m 92dB @ 1m

CONNECTOR

CONSTRUCTION

GRILLE Custom perforated metal grille with protective foam

INSTALLATION, RIGGING, FLYING 4 rubber feet + wall mount bracket

DIMENSIONS (WxDxH) 150x375x380mm 150x375x380mm

WEIGHT

AMPLIFICATION

INPUT

CONNECTORS

PROTECTION

2x spring terminals Spring terminal + XLR 3p

15mm birch plywood 15mm birch plywood

3.5Kg

N/A

N/A

N/A

N/A

Signal in + Line 100V

XLR 3p + Spring terminal

Short-circuit, limiter

5Kg

150W rms module

SUB8 & SUB8A

Installation subwoofers

Dimensions

375

380

PROFACTOR S.A., all right s reserved. The tech nical data and the funct ion al produ ct characte ris tics can be subject
to mod ifi cations. The photocopying, the translation, and a ll other forms of co pying of f rag ments or of the integrlity
of this user's ma nua l is prohi bited.

150

Unit: mm (m ilime ters)

www.moosesound.com 5

MAN186_0

MOOSE is a brand or PROFACTOR S.A.

PROFACTOR S.A

Rua do Padrão 52
4440-617 Valongo
PORTUGAL
Telf.: [phone]
Fax: [phone]
[e-mail]

PROUDLY DEVELOPED AND

MANUFACTURED IN PORTUGAL

www.moosesound.com