USER’S MANUAL
MAN186_0
www.moosesound.com
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
Installation subwoofers
SUB8 & SUB8A
Dear customer,
Thank for choosing MOOSE branded products!
MOOSE is a brand of professional audio & lighting products, proudly developed and manufactured in
PORTUGAL.
In order to operate this product in a safe and reliable manner, please follow the instructions in this booklet and
before operating the equipment read the instructions carefully and please note the technical information.
Our products undergo very rigorous testing under strict conditions and they are monitored continuosly during the
manufacturing process. In order to guarantee the product function and safety, the original parts of the
manufacturer's design must be used. If any parts other than those of the manufacturer are used, or the product is
modified in any way, the user forfeits all warranty rights to claim.
MAN186_0
CAUTION
RIS K OF EL ECTRI C SH OCK. DO NOT OPE N.
To pr eve nt ele ct ric al sho ck do not remov e
the cover. N o u se r se rv ice ab le p ar ts ins ide.
Refer ser vi ce to qu alified personnel only.
Introduction
www.moosesound.com 2
Caution
The light ning flash with a rrowhead symbol w ithin an equila teral triangle is intended
to alert t he user to the presence of u ninsulated "dangerous voltage" withi n the
prod uct's enclosure that may be of su fficient magnitu de to consti tute a ri sk of
electrical sho ck.
The exclamation mark within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instruc tions.
The ampli fier is marked w ith this instructi on so ple ase
proc eed accordingly in order to avoi d any hazard.
1. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match
the values specified on the equipment.
2. If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet
with a protective ground. Never deactivate the protective ground of a power cord.
3. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before
extended periods of disuse.
4. Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service company.
5. Do not open or modify this equipment.
6. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping
hazards.
7. Do not turn on the Amplifier ON before checking that all volumes to zero .
IMPORTANT: Never remove the cover, because otherwise there may be a risk of electric shock. There are no user
serviceable parts inside. Have repairs carried out only by qualified service personnel.
Installation subwoofers
SUB8 & SUB8A
MAN186_0
www.moosesound.com 3
Manufacturers Declaration
PROPER DISPOSAL OF THIS PRODUCT
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal .
ENVIRONMENTAL PROTECTION AND ENERGY CONSERVATION
Energy conservation is an active contribution to environmental protection. Please turn off all unneeded electrical
devices. To prevent unneeded devices from consuming power in standby mode, disconnect the mains plug.
EC DECLARATION OF CONFORMITY
The equipment marketed by MOOSE complies (where applicable) with the essential requirements and other
relevant specifications of Directives 1999/5/EC (R&TTE), 2004/108/EC (EMC) und 2006/95/EC (LVD). Additional
information can be requested to info@profactor.pt.
PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL
Installation subwoofers
SUB8 & SUB8A
MAN186_0
www.moosesound.com 4
Connections and Controls
Please refer to the following scheme and instructions:
Installation subwoofers
SUB8 & SUB8A
1. INPUT: Balanced signal input socket (XLR 3p) for connection of an external audio signal source (e.g., mixer).
2. LINE INPUT: 100V Line input that can be picked from an existing 100V installation.
3. VOLUME: Main volume adjustment. Sets the relative volume of the stage monitor.
4. SUB X-OVER: X-over frequency adjustment from 70Hz to 140Hz.
5. SUB PHASE: Phase inverter switch 0° or 180°.
6. POWER ON: Illuminated on/off switch. Before switching the system on or off, always adjust the volume to
zero.
7. MAINS IN: Power socket with fuse holder, AC 230V - 50~60Hz. Replace the fuse only with a fuse of the same
type and rating. If the fuse blows repeatedly, please contact an authorised service company.
8. LINE INPUT: 100V Line input. It can be used depending on the output type from amplifier in use.
9. HIGH IMPEDANCE INPUT: Line input in 8Ohm. It can be used depending on the output type from amplifier in
use.
8
2
4
9
1
3
5
6 7
LINE INPUT
Com
100V
0º 180º
MAINS
230V AC
50HZ
70VA
FUSE F 4A
INPUT
SUB PHASE SUB X-OVERSUB LEVEL
CAUTION
RISK OF ELECT RIC SHOC K. DO NOT OPEN.
To preven t elec trical shock do not remov e
the cove r. No us er ser viceab le par ts ins ide.
Refer serv ice to q ualifi ed p erson nel only.
POWER
ON
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
5
6
4
7
3
8
2
9
140HZ10
70HZ0
1
Active PA subwoofer
www.moosesound.com
INSTALLATION
SUB 8A
SUBWOOFER
Variable X-over frequency
From 70Hz to 140Hz
LINE INPUT
Com
100V
HIGH IMP. INPUT
Com
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
Passive PA subwoofer
www.moosesound.com
INSTALLATION
SUB 8
SUBWOOFER
100V Line input
8Ohm high impedance input
8
Technical specifications
MODE L SUB8 SUB8 A
TYPE Compact passive subwoofer Compact passive subwoofer
ENCLOSURE DESIGN Bass reflex cabinet Bass reflex cabinet
POWER OUTPUT (RMS) 200W 200W
FREQUENCY RANGE 40Hz - 180Hz 40Hz - 180Hz
NOMINAL IMPEDANCE 8Ohm 8Ohm
TRANSDUCER TYPE 1x 8" LF 1x 8" LF
DISPERSION N/A N/A
CROSSOVER FREQUENCY Variabel 70Hz-140Hz Variabel 70Hz-140Hz
MAX. S.P.L. (PEAK) 92dB @ 1m 92dB @ 1m
CONSTRUCTION
CONNECTOR
15mm birch plywood 15mm birch plywood
2x spring terminals Spring terminal + XLR 3p
GRILLE Custom perforated metal grille with protective foam
INSTALLATION, RIGGING, FLYING 4 rubber feet + wall mount bracket
DIMENSIONS (WxDxH) 150x375x380mm 150x375x380mm
WEIGHT
AMPLIFICATION
INPUT
CONNECTORS
PROTECTION
3.5Kg
N/A
N/A
N/A
N/A
5Kg
150W rms module
Signal in + Line 100V
XLR 3p + Spring terminal
Short-circuit, limiter
MAN186_0
www.moosesound.com 5
Installation subwoofers
SUB8 & SUB8A
Dimensions
380
150
375
Unit: mm (mi limete rs)
PROFACTOR S.A., a ll rights res erved. The tech ni cal data an d the funct ional produ ct charac te ristics c an be subje ct
to modific ations. T he photocopyi ng, the tra nslation, a nd all othe r fo rms of copyin g of fragme nts or of the i nteg rlity
of this us er's manu al is prohi bited.
www.moosesound.com
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
PROFACTOR S.A
Rua do Padrão 52
4440-617 Valongo
PORTUGAL
Telf.: +351 224 119 160
Fax: +351 224 155 822
info@profactor.pt
MOOSE is a brand or PROFACTOR S.A.
Loading...